From f7466e6ca084e3b53d8f33c71af1e0e1b776a7b0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 19 Apr 2013 18:58:44 -0400 Subject: [PATCH] drm/radeon: switch to pptable.h Internally we switched to using a separate header for atombios pplib definitions. Switch over the open source driver. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios.h | 615 +-------------------------- drivers/gpu/drm/radeon/pptable.h | 682 ++++++++++++++++++++++++++++++ 2 files changed, 685 insertions(+), 612 deletions(-) create mode 100644 drivers/gpu/drm/radeon/pptable.h diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 16b120c3f144..af10f8571d87 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -7661,618 +7661,6 @@ typedef struct _ATOM_POWERPLAY_INFO_V3 ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; }ATOM_POWERPLAY_INFO_V3; -/* New PPlib */ -/**************************************************************************/ -typedef struct _ATOM_PPLIB_THERMALCONTROLLER - -{ - UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_* - UCHAR ucI2cLine; // as interpreted by DAL I2C - UCHAR ucI2cAddress; - UCHAR ucFanParameters; // Fan Control Parameters. - UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only. - UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only. - UCHAR ucReserved; // ---- - UCHAR ucFlags; // to be defined -} ATOM_PPLIB_THERMALCONTROLLER; - -#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f -#define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller. - -#define ATOM_PP_THERMALCONTROLLER_NONE 0 -#define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_LM64 5 -#define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib -#define ATOM_PP_THERMALCONTROLLER_RV6xx 7 -#define ATOM_PP_THERMALCONTROLLER_RV770 8 -#define ATOM_PP_THERMALCONTROLLER_ADT7473 9 -#define ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO 11 -#define ATOM_PP_THERMALCONTROLLER_EVERGREEN 12 -#define ATOM_PP_THERMALCONTROLLER_EMC2103 13 /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen. -#define ATOM_PP_THERMALCONTROLLER_SUMO 14 /* 0x0E */ // Sumo type, used internally -#define ATOM_PP_THERMALCONTROLLER_NISLANDS 15 -#define ATOM_PP_THERMALCONTROLLER_SISLANDS 16 -#define ATOM_PP_THERMALCONTROLLER_LM96163 17 -#define ATOM_PP_THERMALCONTROLLER_CISLANDS 18 - -// Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal. -// We probably should reserve the bit 0x80 for this use. -// To keep the number of these types low we should also use the same code for all ASICs (i.e. do not distinguish RV6xx and RV7xx Internal here). -// The driver can pick the correct internal controller based on the ASIC. - -#define ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL 0x89 // ADT7473 Fan Control + Internal Thermal Controller -#define ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL 0x8D // EMC2103 Fan Control + Internal Thermal Controller - -typedef struct _ATOM_PPLIB_STATE -{ - UCHAR ucNonClockStateIndex; - UCHAR ucClockStateIndices[1]; // variable-sized -} ATOM_PPLIB_STATE; - - -typedef struct _ATOM_PPLIB_FANTABLE -{ - UCHAR ucFanTableFormat; // Change this if the table format changes or version changes so that the other fields are not the same. - UCHAR ucTHyst; // Temperature hysteresis. Integer. - USHORT usTMin; // The temperature, in 0.01 centigrades, below which we just run at a minimal PWM. - USHORT usTMed; // The middle temperature where we change slopes. - USHORT usTHigh; // The high point above TMed for adjusting the second slope. - USHORT usPWMMin; // The minimum PWM value in percent (0.01% increments). - USHORT usPWMMed; // The PWM value (in percent) at TMed. - USHORT usPWMHigh; // The PWM value at THigh. -} ATOM_PPLIB_FANTABLE; - -typedef struct _ATOM_PPLIB_FANTABLE2 -{ - ATOM_PPLIB_FANTABLE basicTable; - USHORT usTMax; // The max temperature -} ATOM_PPLIB_FANTABLE2; - -typedef struct _ATOM_PPLIB_EXTENDEDHEADER -{ - USHORT usSize; - ULONG ulMaxEngineClock; // For Overdrive. - ULONG ulMaxMemoryClock; // For Overdrive. - // Add extra system parameters here, always adjust size to include all fields. - USHORT usVCETableOffset; //points to ATOM_PPLIB_VCE_Table - USHORT usUVDTableOffset; //points to ATOM_PPLIB_UVD_Table - USHORT usSAMUTableOffset; //points to ATOM_PPLIB_SAMU_Table - USHORT usPPMTableOffset; //points to ATOM_PPLIB_PPM_Table -} ATOM_PPLIB_EXTENDEDHEADER; - -//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps -#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1 -#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2 -#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4 -#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8 -#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16 -#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32 -#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64 -#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128 -#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256 -#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512 -#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024 -#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048 -#define ATOM_PP_PLATFORM_CAP_MVDDCONTROL 4096 -#define ATOM_PP_PLATFORM_CAP_GOTO_BOOT_ON_ALERT 0x2000 // Go to boot state on alerts, e.g. on an AC->DC transition. -#define ATOM_PP_PLATFORM_CAP_DONT_WAIT_FOR_VBLANK_ON_ALERT 0x4000 // Do NOT wait for VBLANK during an alert (e.g. AC->DC transition). -#define ATOM_PP_PLATFORM_CAP_VDDCI_CONTROL 0x8000 // Does the driver control VDDCI independently from VDDC. -#define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000 // Enable the 'regulator hot' feature. -#define ATOM_PP_PLATFORM_CAP_BACO 0x00020000 // Does the driver supports BACO state. -#define ATOM_PP_PLATFORM_CAP_NEW_CAC_VOLTAGE 0x00040000 // Does the driver supports new CAC voltage table. -#define ATOM_PP_PLATFORM_CAP_REVERT_GPIO5_POLARITY 0x00080000 // Does the driver supports revert GPIO5 polarity. -#define ATOM_PP_PLATFORM_CAP_OUTPUT_THERMAL2GPIO17 0x00100000 // Does the driver supports thermal2GPIO17. -#define ATOM_PP_PLATFORM_CAP_VRHOT_GPIO_CONFIGURABLE 0x00200000 // Does the driver supports VR HOT GPIO Configurable. - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE -{ - ATOM_COMMON_TABLE_HEADER sHeader; - - UCHAR ucDataRevision; - - UCHAR ucNumStates; - UCHAR ucStateEntrySize; - UCHAR ucClockInfoSize; - UCHAR ucNonClockSize; - - // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures - USHORT usStateArrayOffset; - - // offset from start of this table to array of ASIC-specific structures, - // currently ATOM_PPLIB_CLOCK_INFO. - USHORT usClockInfoArrayOffset; - - // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO - USHORT usNonClockInfoArrayOffset; - - USHORT usBackbiasTime; // in microseconds - USHORT usVoltageTime; // in microseconds - USHORT usTableSize; //the size of this structure, or the extended structure - - ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_* - - ATOM_PPLIB_THERMALCONTROLLER sThermalController; - - USHORT usBootClockInfoOffset; - USHORT usBootNonClockInfoOffset; - -} ATOM_PPLIB_POWERPLAYTABLE; - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE2 -{ - ATOM_PPLIB_POWERPLAYTABLE basicTable; - UCHAR ucNumCustomThermalPolicy; - USHORT usCustomThermalPolicyArrayOffset; -}ATOM_PPLIB_POWERPLAYTABLE2, *LPATOM_PPLIB_POWERPLAYTABLE2; - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE3 -{ - ATOM_PPLIB_POWERPLAYTABLE2 basicTable2; - USHORT usFormatID; // To be used ONLY by PPGen. - USHORT usFanTableOffset; - USHORT usExtendendedHeaderOffset; -} ATOM_PPLIB_POWERPLAYTABLE3, *LPATOM_PPLIB_POWERPLAYTABLE3; - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE4 -{ - ATOM_PPLIB_POWERPLAYTABLE3 basicTable3; - ULONG ulGoldenPPID; // PPGen use only - ULONG ulGoldenRevision; // PPGen use only - USHORT usVddcDependencyOnSCLKOffset; - USHORT usVddciDependencyOnMCLKOffset; - USHORT usVddcDependencyOnMCLKOffset; - USHORT usMaxClockVoltageOnDCOffset; - USHORT usVddcPhaseShedLimitsTableOffset; // Points to ATOM_PPLIB_PhaseSheddingLimits_Table - USHORT usMvddDependencyOnMCLKOffset; -} ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4; - -typedef struct _ATOM_PPLIB_POWERPLAYTABLE5 -{ - ATOM_PPLIB_POWERPLAYTABLE4 basicTable4; - ULONG ulTDPLimit; - ULONG ulNearTDPLimit; - ULONG ulSQRampingThreshold; - USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table - ULONG ulCACLeakage; // The iLeakage for driver calculated CAC leakage table - USHORT usTDPODLimit; - USHORT usLoadLineSlope; // in milliOhms * 100 -} ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5; - -//// ATOM_PPLIB_NONCLOCK_INFO::usClassification -#define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007 -#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0 -#define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0 -#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1 -#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3 -#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5 -// 2, 4, 6, 7 are reserved - -#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008 -#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010 -#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020 -#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040 -#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080 -#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100 -#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200 -#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400 -#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800 -#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000 -#define ATOM_PPLIB_CLASSIFICATION_HD2STATE 0x2000 -#define ATOM_PPLIB_CLASSIFICATION_HDSTATE 0x4000 -#define ATOM_PPLIB_CLASSIFICATION_SDSTATE 0x8000 - -//// ATOM_PPLIB_NONCLOCK_INFO::usClassification2 -#define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2 0x0001 -#define ATOM_PPLIB_CLASSIFICATION2_ULV 0x0002 -#define ATOM_PPLIB_CLASSIFICATION2_MVC 0x0004 //Multi-View Codec (BD-3D) - -//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings -#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001 -#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002 - -// 0 is 2.5Gb/s, 1 is 5Gb/s -#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004 -#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2 - -// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec -#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8 -#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3 - -// lookup into reduced refresh-rate table -#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00 -#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8 - -#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0 -#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1 -// 2-15 TBD as needed. - -#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000 -#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000 - -#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000 - -#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000 - -//memory related flags -#define ATOM_PPLIB_SWSTATE_MEMORY_DLL_OFF 0x000010000 - -//M3 Arb //2bits, current 3 sets of parameters in total -#define ATOM_PPLIB_M3ARB_MASK 0x00060000 -#define ATOM_PPLIB_M3ARB_SHIFT 17 - -#define ATOM_PPLIB_ENABLE_DRR 0x00080000 - -// remaining 16 bits are reserved -typedef struct _ATOM_PPLIB_THERMAL_STATE -{ - UCHAR ucMinTemperature; - UCHAR ucMaxTemperature; - UCHAR ucThermalAction; -}ATOM_PPLIB_THERMAL_STATE, *LPATOM_PPLIB_THERMAL_STATE; - -// Contained in an array starting at the offset -// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset. -// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex -#define ATOM_PPLIB_NONCLOCKINFO_VER1 12 -#define ATOM_PPLIB_NONCLOCKINFO_VER2 24 -typedef struct _ATOM_PPLIB_NONCLOCK_INFO -{ - USHORT usClassification; - UCHAR ucMinTemperature; - UCHAR ucMaxTemperature; - ULONG ulCapsAndSettings; - UCHAR ucRequiredPower; - USHORT usClassification2; - ULONG ulVCLK; - ULONG ulDCLK; - UCHAR ucUnused[5]; -} ATOM_PPLIB_NONCLOCK_INFO; - -// Contained in an array starting at the offset -// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset. -// referenced from ATOM_PPLIB_STATE::ucClockStateIndices -typedef struct _ATOM_PPLIB_R600_CLOCK_INFO -{ - USHORT usEngineClockLow; - UCHAR ucEngineClockHigh; - - USHORT usMemoryClockLow; - UCHAR ucMemoryClockHigh; - - USHORT usVDDC; - USHORT usUnused1; - USHORT usUnused2; - - ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_* - -} ATOM_PPLIB_R600_CLOCK_INFO; - -// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO -#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1 -#define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2 -#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4 -#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8 -#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16 -#define ATOM_PPLIB_R600_FLAGS_LOWPOWER 32 // On the RV770 use 'low power' setting (sequencer S0). - -typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO -{ - USHORT usEngineClockLow; - UCHAR ucEngineClockHigh; - - USHORT usMemoryClockLow; - UCHAR ucMemoryClockHigh; - - USHORT usVDDC; - USHORT usVDDCI; - USHORT usUnused; - - ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_* - -} ATOM_PPLIB_EVERGREEN_CLOCK_INFO; - -typedef struct _ATOM_PPLIB_SI_CLOCK_INFO -{ - USHORT usEngineClockLow; - UCHAR ucEngineClockHigh; - - USHORT usMemoryClockLow; - UCHAR ucMemoryClockHigh; - - USHORT usVDDC; - USHORT usVDDCI; - UCHAR ucPCIEGen; - UCHAR ucUnused1; - - ULONG ulFlags; // ATOM_PPLIB_SI_FLAGS_*, no flag is necessary for now - -} ATOM_PPLIB_SI_CLOCK_INFO; - -typedef struct _ATOM_PPLIB_CI_CLOCK_INFO -{ - USHORT usEngineClockLow; - UCHAR ucEngineClockHigh; - - USHORT usMemoryClockLow; - UCHAR ucMemoryClockHigh; - - UCHAR ucPCIEGen; - USHORT usPCIELane; -} ATOM_PPLIB_CI_CLOCK_INFO; - -typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO - -{ - USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600). - UCHAR ucLowEngineClockHigh; - USHORT usHighEngineClockLow; // High Engine clock in MHz. - UCHAR ucHighEngineClockHigh; - USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants. - UCHAR ucMemoryClockHigh; // Currentyl unused. - UCHAR ucPadding; // For proper alignment and size. - USHORT usVDDC; // For the 780, use: None, Low, High, Variable - UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16} - UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement. - USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200). - ULONG ulFlags; -} ATOM_PPLIB_RS780_CLOCK_INFO; - -#define ATOM_PPLIB_RS780_VOLTAGE_NONE 0 -#define ATOM_PPLIB_RS780_VOLTAGE_LOW 1 -#define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2 -#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3 - -#define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is. -#define ATOM_PPLIB_RS780_SPMCLK_LOW 1 -#define ATOM_PPLIB_RS780_SPMCLK_HIGH 2 - -#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0 -#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1 -#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2 - -typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{ - USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz - UCHAR ucEngineClockHigh; //clockfrequency >> 16. - UCHAR vddcIndex; //2-bit vddc index; - USHORT tdpLimit; - //please initalize to 0 - USHORT rsv1; - //please initialize to 0s - ULONG rsv2[2]; -}ATOM_PPLIB_SUMO_CLOCK_INFO; - - - -typedef struct _ATOM_PPLIB_STATE_V2 -{ - //number of valid dpm levels in this state; Driver uses it to calculate the whole - //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR) - UCHAR ucNumDPMLevels; - - //a index to the array of nonClockInfos - UCHAR nonClockInfoIndex; - /** - * Driver will read the first ucNumDPMLevels in this array - */ - UCHAR clockInfoIndex[1]; -} ATOM_PPLIB_STATE_V2; - -typedef struct _StateArray{ - //how many states we have - UCHAR ucNumEntries; - - ATOM_PPLIB_STATE_V2 states[1]; -}StateArray; - - -typedef struct _ClockInfoArray{ - //how many clock levels we have - UCHAR ucNumEntries; - - //sizeof(ATOM_PPLIB_CLOCK_INFO) - UCHAR ucEntrySize; - - UCHAR clockInfo[1]; -}ClockInfoArray; - -typedef struct _NonClockInfoArray{ - - //how many non-clock levels we have. normally should be same as number of states - UCHAR ucNumEntries; - //sizeof(ATOM_PPLIB_NONCLOCK_INFO) - UCHAR ucEntrySize; - - ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1]; -}NonClockInfoArray; - -typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record -{ - USHORT usClockLow; - UCHAR ucClockHigh; - USHORT usVoltage; -}ATOM_PPLIB_Clock_Voltage_Dependency_Record; - -typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table -{ - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1]; // Dynamically allocate entries. -}ATOM_PPLIB_Clock_Voltage_Dependency_Table; - -typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record -{ - USHORT usSclkLow; - UCHAR ucSclkHigh; - USHORT usMclkLow; - UCHAR ucMclkHigh; - USHORT usVddc; - USHORT usVddci; -}ATOM_PPLIB_Clock_Voltage_Limit_Record; - -typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table -{ - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries. -}ATOM_PPLIB_Clock_Voltage_Limit_Table; - -typedef struct _ATOM_PPLIB_CAC_Leakage_Record -{ - USHORT usVddc; // We use this field for the "fake" standardized VDDC for power calculations; For CI and newer, we use this as the real VDDC value. - ULONG ulLeakageValue; // For CI and newer we use this as the "fake" standar VDDC value. -}ATOM_PPLIB_CAC_Leakage_Record; - -typedef struct _ATOM_PPLIB_CAC_Leakage_Table -{ - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_CAC_Leakage_Record entries[1]; // Dynamically allocate entries. -}ATOM_PPLIB_CAC_Leakage_Table; - -typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Record -{ - USHORT usVoltage; - USHORT usSclkLow; - UCHAR ucSclkHigh; - USHORT usMclkLow; - UCHAR ucMclkHigh; -}ATOM_PPLIB_PhaseSheddingLimits_Record; - -typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Table -{ - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_PhaseSheddingLimits_Record entries[1]; // Dynamically allocate entries. -}ATOM_PPLIB_PhaseSheddingLimits_Table; - -typedef struct _VCEClockInfo{ - USHORT usEVClkLow; - UCHAR ucEVClkHigh; - USHORT usECClkLow; - UCHAR ucECClkHigh; -}VCEClockInfo; - -typedef struct _VCEClockInfoArray{ - UCHAR ucNumEntries; - VCEClockInfo entries[1]; -}VCEClockInfoArray; - -typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record -{ - USHORT usVoltage; - UCHAR ucVCEClockInfoIndex; -}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record; - -typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table -{ - UCHAR numEntries; - ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record entries[1]; -}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table; - -typedef struct _ATOM_PPLIB_VCE_State_Record -{ - UCHAR ucVCEClockInfoIndex; - UCHAR ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary -}ATOM_PPLIB_VCE_State_Record; - -typedef struct _ATOM_PPLIB_VCE_State_Table -{ - UCHAR numEntries; - ATOM_PPLIB_VCE_State_Record entries[1]; -}ATOM_PPLIB_VCE_State_Table; - - -typedef struct _ATOM_PPLIB_VCE_Table -{ - UCHAR revid; -// VCEClockInfoArray array; -// ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table limits; -// ATOM_PPLIB_VCE_State_Table states; -}ATOM_PPLIB_VCE_Table; - - -typedef struct _UVDClockInfo{ - USHORT usVClkLow; - UCHAR ucVClkHigh; - USHORT usDClkLow; - UCHAR ucDClkHigh; -}UVDClockInfo; - -typedef struct _UVDClockInfoArray{ - UCHAR ucNumEntries; - UVDClockInfo entries[1]; -}UVDClockInfoArray; - -typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record -{ - USHORT usVoltage; - UCHAR ucUVDClockInfoIndex; -}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record; - -typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table -{ - UCHAR numEntries; - ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record entries[1]; -}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table; - -typedef struct _ATOM_PPLIB_UVD_State_Record -{ - UCHAR ucUVDClockInfoIndex; - UCHAR ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary -}ATOM_PPLIB_UVD_State_Record; - -typedef struct _ATOM_PPLIB_UVD_State_Table -{ - UCHAR numEntries; - ATOM_PPLIB_UVD_State_Record entries[1]; -}ATOM_PPLIB_UVD_State_Table; - - -typedef struct _ATOM_PPLIB_UVD_Table -{ - UCHAR revid; -// UVDClockInfoArray array; -// ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table limits; -// ATOM_PPLIB_UVD_State_Table states; -}ATOM_PPLIB_UVD_Table; - - -typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Record -{ - USHORT usVoltage; - USHORT usSAMClockLow; - UCHAR ucSAMClockHigh; -}ATOM_PPLIB_SAMClk_Voltage_Limit_Record; - -typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Table{ - UCHAR numEntries; - ATOM_PPLIB_SAMClk_Voltage_Limit_Record entries[1]; -}ATOM_PPLIB_SAMClk_Voltage_Limit_Table; - -typedef struct _ATOM_PPLIB_SAMU_Table -{ - UCHAR revid; - ATOM_PPLIB_SAMClk_Voltage_Limit_Table limits; -}ATOM_PPLIB_SAMU_Table; - -#define ATOM_PPM_A_A 1 -#define ATOM_PPM_A_I 2 -typedef struct _ATOM_PPLIB_PPM_Table -{ - UCHAR ucRevId; - UCHAR ucPpmDesign; //A+I or A+A - USHORT usCpuCoreNumber; - ULONG ulPlatformTDP; - ULONG ulSmallACPlatformTDP; - ULONG ulPlatformTDC; - ULONG ulSmallACPlatformTDC; - ULONG ulApuTDP; - ULONG ulDGpuTDP; - ULONG ulDGpuUlvPower; - ULONG ulTjmax; -} ATOM_PPLIB_PPM_Table; - -/**************************************************************************/ - // Following definitions are for compatibility issue in different SW components. #define ATOM_MASTER_DATA_TABLE_REVISION 0x01 @@ -8485,3 +7873,6 @@ typedef struct { #endif /* _ATOMBIOS_H */ + +#include "pptable.h" + diff --git a/drivers/gpu/drm/radeon/pptable.h b/drivers/gpu/drm/radeon/pptable.h new file mode 100644 index 000000000000..da43ab328833 --- /dev/null +++ b/drivers/gpu/drm/radeon/pptable.h @@ -0,0 +1,682 @@ +/* + * Copyright 2013 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _PPTABLE_H +#define _PPTABLE_H + +#pragma pack(push, 1) + +typedef struct _ATOM_PPLIB_THERMALCONTROLLER + +{ + UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_* + UCHAR ucI2cLine; // as interpreted by DAL I2C + UCHAR ucI2cAddress; + UCHAR ucFanParameters; // Fan Control Parameters. + UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only. + UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only. + UCHAR ucReserved; // ---- + UCHAR ucFlags; // to be defined +} ATOM_PPLIB_THERMALCONTROLLER; + +#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f +#define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller. + +#define ATOM_PP_THERMALCONTROLLER_NONE 0 +#define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_LM64 5 +#define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_RV6xx 7 +#define ATOM_PP_THERMALCONTROLLER_RV770 8 +#define ATOM_PP_THERMALCONTROLLER_ADT7473 9 +#define ATOM_PP_THERMALCONTROLLER_KONG 10 +#define ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO 11 +#define ATOM_PP_THERMALCONTROLLER_EVERGREEN 12 +#define ATOM_PP_THERMALCONTROLLER_EMC2103 13 /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen. +#define ATOM_PP_THERMALCONTROLLER_SUMO 14 /* 0x0E */ // Sumo type, used internally +#define ATOM_PP_THERMALCONTROLLER_NISLANDS 15 +#define ATOM_PP_THERMALCONTROLLER_SISLANDS 16 +#define ATOM_PP_THERMALCONTROLLER_LM96163 17 +#define ATOM_PP_THERMALCONTROLLER_CISLANDS 18 +#define ATOM_PP_THERMALCONTROLLER_KAVERI 19 + + +// Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal. +// We probably should reserve the bit 0x80 for this use. +// To keep the number of these types low we should also use the same code for all ASICs (i.e. do not distinguish RV6xx and RV7xx Internal here). +// The driver can pick the correct internal controller based on the ASIC. + +#define ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL 0x89 // ADT7473 Fan Control + Internal Thermal Controller +#define ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL 0x8D // EMC2103 Fan Control + Internal Thermal Controller + +typedef struct _ATOM_PPLIB_STATE +{ + UCHAR ucNonClockStateIndex; + UCHAR ucClockStateIndices[1]; // variable-sized +} ATOM_PPLIB_STATE; + + +typedef struct _ATOM_PPLIB_FANTABLE +{ + UCHAR ucFanTableFormat; // Change this if the table format changes or version changes so that the other fields are not the same. + UCHAR ucTHyst; // Temperature hysteresis. Integer. + USHORT usTMin; // The temperature, in 0.01 centigrades, below which we just run at a minimal PWM. + USHORT usTMed; // The middle temperature where we change slopes. + USHORT usTHigh; // The high point above TMed for adjusting the second slope. + USHORT usPWMMin; // The minimum PWM value in percent (0.01% increments). + USHORT usPWMMed; // The PWM value (in percent) at TMed. + USHORT usPWMHigh; // The PWM value at THigh. +} ATOM_PPLIB_FANTABLE; + +typedef struct _ATOM_PPLIB_FANTABLE2 +{ + ATOM_PPLIB_FANTABLE basicTable; + USHORT usTMax; // The max temperature +} ATOM_PPLIB_FANTABLE2; + +typedef struct _ATOM_PPLIB_EXTENDEDHEADER +{ + USHORT usSize; + ULONG ulMaxEngineClock; // For Overdrive. + ULONG ulMaxMemoryClock; // For Overdrive. + // Add extra system parameters here, always adjust size to include all fields. + USHORT usVCETableOffset; //points to ATOM_PPLIB_VCE_Table + USHORT usUVDTableOffset; //points to ATOM_PPLIB_UVD_Table + USHORT usSAMUTableOffset; //points to ATOM_PPLIB_SAMU_Table + USHORT usPPMTableOffset; //points to ATOM_PPLIB_PPM_Table + USHORT usACPTableOffset; //points to ATOM_PPLIB_ACP_Table + USHORT usPowerTuneTableOffset; //points to ATOM_PPLIB_POWERTUNE_Table +} ATOM_PPLIB_EXTENDEDHEADER; + +//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps +#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1 +#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2 +#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4 +#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8 +#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16 +#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32 +#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64 +#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128 +#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256 +#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512 +#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024 +#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048 +#define ATOM_PP_PLATFORM_CAP_MVDDCONTROL 4096 +#define ATOM_PP_PLATFORM_CAP_GOTO_BOOT_ON_ALERT 0x2000 // Go to boot state on alerts, e.g. on an AC->DC transition. +#define ATOM_PP_PLATFORM_CAP_DONT_WAIT_FOR_VBLANK_ON_ALERT 0x4000 // Do NOT wait for VBLANK during an alert (e.g. AC->DC transition). +#define ATOM_PP_PLATFORM_CAP_VDDCI_CONTROL 0x8000 // Does the driver control VDDCI independently from VDDC. +#define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000 // Enable the 'regulator hot' feature. +#define ATOM_PP_PLATFORM_CAP_BACO 0x00020000 // Does the driver supports BACO state. +#define ATOM_PP_PLATFORM_CAP_NEW_CAC_VOLTAGE 0x00040000 // Does the driver supports new CAC voltage table. +#define ATOM_PP_PLATFORM_CAP_REVERT_GPIO5_POLARITY 0x00080000 // Does the driver supports revert GPIO5 polarity. +#define ATOM_PP_PLATFORM_CAP_OUTPUT_THERMAL2GPIO17 0x00100000 // Does the driver supports thermal2GPIO17. +#define ATOM_PP_PLATFORM_CAP_VRHOT_GPIO_CONFIGURABLE 0x00200000 // Does the driver supports VR HOT GPIO Configurable. +#define ATOM_PP_PLATFORM_CAP_TEMP_INVERSION 0x00400000 // Does the driver supports Temp Inversion feature. +#define ATOM_PP_PLATFORM_CAP_EVV 0x00800000 + +typedef struct _ATOM_PPLIB_POWERPLAYTABLE +{ + ATOM_COMMON_TABLE_HEADER sHeader; + + UCHAR ucDataRevision; + + UCHAR ucNumStates; + UCHAR ucStateEntrySize; + UCHAR ucClockInfoSize; + UCHAR ucNonClockSize; + + // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures + USHORT usStateArrayOffset; + + // offset from start of this table to array of ASIC-specific structures, + // currently ATOM_PPLIB_CLOCK_INFO. + USHORT usClockInfoArrayOffset; + + // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO + USHORT usNonClockInfoArrayOffset; + + USHORT usBackbiasTime; // in microseconds + USHORT usVoltageTime; // in microseconds + USHORT usTableSize; //the size of this structure, or the extended structure + + ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_* + + ATOM_PPLIB_THERMALCONTROLLER sThermalController; + + USHORT usBootClockInfoOffset; + USHORT usBootNonClockInfoOffset; + +} ATOM_PPLIB_POWERPLAYTABLE; + +typedef struct _ATOM_PPLIB_POWERPLAYTABLE2 +{ + ATOM_PPLIB_POWERPLAYTABLE basicTable; + UCHAR ucNumCustomThermalPolicy; + USHORT usCustomThermalPolicyArrayOffset; +}ATOM_PPLIB_POWERPLAYTABLE2, *LPATOM_PPLIB_POWERPLAYTABLE2; + +typedef struct _ATOM_PPLIB_POWERPLAYTABLE3 +{ + ATOM_PPLIB_POWERPLAYTABLE2 basicTable2; + USHORT usFormatID; // To be used ONLY by PPGen. + USHORT usFanTableOffset; + USHORT usExtendendedHeaderOffset; +} ATOM_PPLIB_POWERPLAYTABLE3, *LPATOM_PPLIB_POWERPLAYTABLE3; + +typedef struct _ATOM_PPLIB_POWERPLAYTABLE4 +{ + ATOM_PPLIB_POWERPLAYTABLE3 basicTable3; + ULONG ulGoldenPPID; // PPGen use only + ULONG ulGoldenRevision; // PPGen use only + USHORT usVddcDependencyOnSCLKOffset; + USHORT usVddciDependencyOnMCLKOffset; + USHORT usVddcDependencyOnMCLKOffset; + USHORT usMaxClockVoltageOnDCOffset; + USHORT usVddcPhaseShedLimitsTableOffset; // Points to ATOM_PPLIB_PhaseSheddingLimits_Table + USHORT usMvddDependencyOnMCLKOffset; +} ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4; + +typedef struct _ATOM_PPLIB_POWERPLAYTABLE5 +{ + ATOM_PPLIB_POWERPLAYTABLE4 basicTable4; + ULONG ulTDPLimit; + ULONG ulNearTDPLimit; + ULONG ulSQRampingThreshold; + USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table + ULONG ulCACLeakage; // The iLeakage for driver calculated CAC leakage table + USHORT usTDPODLimit; + USHORT usLoadLineSlope; // in milliOhms * 100 +} ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5; + +//// ATOM_PPLIB_NONCLOCK_INFO::usClassification +#define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007 +#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0 +#define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0 +#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1 +#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3 +#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5 +// 2, 4, 6, 7 are reserved + +#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008 +#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010 +#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020 +#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040 +#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080 +#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100 +#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200 +#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400 +#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800 +#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000 +#define ATOM_PPLIB_CLASSIFICATION_HD2STATE 0x2000 +#define ATOM_PPLIB_CLASSIFICATION_HDSTATE 0x4000 +#define ATOM_PPLIB_CLASSIFICATION_SDSTATE 0x8000 + +//// ATOM_PPLIB_NONCLOCK_INFO::usClassification2 +#define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2 0x0001 +#define ATOM_PPLIB_CLASSIFICATION2_ULV 0x0002 +#define ATOM_PPLIB_CLASSIFICATION2_MVC 0x0004 //Multi-View Codec (BD-3D) + +//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings +#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001 +#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002 + +// 0 is 2.5Gb/s, 1 is 5Gb/s +#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004 +#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2 + +// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec +#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8 +#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3 + +// lookup into reduced refresh-rate table +#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00 +#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8 + +#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0 +#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1 +// 2-15 TBD as needed. + +#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000 +#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000 + +#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000 + +#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000 + +//memory related flags +#define ATOM_PPLIB_SWSTATE_MEMORY_DLL_OFF 0x000010000 + +//M3 Arb //2bits, current 3 sets of parameters in total +#define ATOM_PPLIB_M3ARB_MASK 0x00060000 +#define ATOM_PPLIB_M3ARB_SHIFT 17 + +#define ATOM_PPLIB_ENABLE_DRR 0x00080000 + +// remaining 16 bits are reserved +typedef struct _ATOM_PPLIB_THERMAL_STATE +{ + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + UCHAR ucThermalAction; +}ATOM_PPLIB_THERMAL_STATE, *LPATOM_PPLIB_THERMAL_STATE; + +// Contained in an array starting at the offset +// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset. +// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex +#define ATOM_PPLIB_NONCLOCKINFO_VER1 12 +#define ATOM_PPLIB_NONCLOCKINFO_VER2 24 +typedef struct _ATOM_PPLIB_NONCLOCK_INFO +{ + USHORT usClassification; + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + ULONG ulCapsAndSettings; + UCHAR ucRequiredPower; + USHORT usClassification2; + ULONG ulVCLK; + ULONG ulDCLK; + UCHAR ucUnused[5]; +} ATOM_PPLIB_NONCLOCK_INFO; + +// Contained in an array starting at the offset +// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset. +// referenced from ATOM_PPLIB_STATE::ucClockStateIndices +typedef struct _ATOM_PPLIB_R600_CLOCK_INFO +{ + USHORT usEngineClockLow; + UCHAR ucEngineClockHigh; + + USHORT usMemoryClockLow; + UCHAR ucMemoryClockHigh; + + USHORT usVDDC; + USHORT usUnused1; + USHORT usUnused2; + + ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_* + +} ATOM_PPLIB_R600_CLOCK_INFO; + +// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO +#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1 +#define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2 +#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4 +#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8 +#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16 +#define ATOM_PPLIB_R600_FLAGS_LOWPOWER 32 // On the RV770 use 'low power' setting (sequencer S0). + +typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO + +{ + USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600). + UCHAR ucLowEngineClockHigh; + USHORT usHighEngineClockLow; // High Engine clock in MHz. + UCHAR ucHighEngineClockHigh; + USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants. + UCHAR ucMemoryClockHigh; // Currentyl unused. + UCHAR ucPadding; // For proper alignment and size. + USHORT usVDDC; // For the 780, use: None, Low, High, Variable + UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16} + UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could + USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200). + ULONG ulFlags; +} ATOM_PPLIB_RS780_CLOCK_INFO; + +#define ATOM_PPLIB_RS780_VOLTAGE_NONE 0 +#define ATOM_PPLIB_RS780_VOLTAGE_LOW 1 +#define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2 +#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3 + +#define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is. +#define ATOM_PPLIB_RS780_SPMCLK_LOW 1 +#define ATOM_PPLIB_RS780_SPMCLK_HIGH 2 + +#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0 +#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1 +#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2 + +typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO +{ + USHORT usEngineClockLow; + UCHAR ucEngineClockHigh; + + USHORT usMemoryClockLow; + UCHAR ucMemoryClockHigh; + + USHORT usVDDC; + USHORT usVDDCI; + USHORT usUnused; + + ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_* + +} ATOM_PPLIB_EVERGREEN_CLOCK_INFO; + +typedef struct _ATOM_PPLIB_SI_CLOCK_INFO +{ + USHORT usEngineClockLow; + UCHAR ucEngineClockHigh; + + USHORT usMemoryClockLow; + UCHAR ucMemoryClockHigh; + + USHORT usVDDC; + USHORT usVDDCI; + UCHAR ucPCIEGen; + UCHAR ucUnused1; + + ULONG ulFlags; // ATOM_PPLIB_SI_FLAGS_*, no flag is necessary for now + +} ATOM_PPLIB_SI_CLOCK_INFO; + +typedef struct _ATOM_PPLIB_CI_CLOCK_INFO +{ + USHORT usEngineClockLow; + UCHAR ucEngineClockHigh; + + USHORT usMemoryClockLow; + UCHAR ucMemoryClockHigh; + + UCHAR ucPCIEGen; + USHORT usPCIELane; +} ATOM_PPLIB_CI_CLOCK_INFO; + +typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{ + USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz + UCHAR ucEngineClockHigh; //clockfrequency >> 16. + UCHAR vddcIndex; //2-bit vddc index; + USHORT tdpLimit; + //please initalize to 0 + USHORT rsv1; + //please initialize to 0s + ULONG rsv2[2]; +}ATOM_PPLIB_SUMO_CLOCK_INFO; + +typedef struct _ATOM_PPLIB_STATE_V2 +{ + //number of valid dpm levels in this state; Driver uses it to calculate the whole + //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR) + UCHAR ucNumDPMLevels; + + //a index to the array of nonClockInfos + UCHAR nonClockInfoIndex; + /** + * Driver will read the first ucNumDPMLevels in this array + */ + UCHAR clockInfoIndex[1]; +} ATOM_PPLIB_STATE_V2; + +typedef struct _StateArray{ + //how many states we have + UCHAR ucNumEntries; + + ATOM_PPLIB_STATE_V2 states[1]; +}StateArray; + + +typedef struct _ClockInfoArray{ + //how many clock levels we have + UCHAR ucNumEntries; + + //sizeof(ATOM_PPLIB_CLOCK_INFO) + UCHAR ucEntrySize; + + UCHAR clockInfo[1]; +}ClockInfoArray; + +typedef struct _NonClockInfoArray{ + + //how many non-clock levels we have. normally should be same as number of states + UCHAR ucNumEntries; + //sizeof(ATOM_PPLIB_NONCLOCK_INFO) + UCHAR ucEntrySize; + + ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1]; +}NonClockInfoArray; + +typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record +{ + USHORT usClockLow; + UCHAR ucClockHigh; + USHORT usVoltage; +}ATOM_PPLIB_Clock_Voltage_Dependency_Record; + +typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table +{ + UCHAR ucNumEntries; // Number of entries. + ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1]; // Dynamically allocate entries. +}ATOM_PPLIB_Clock_Voltage_Dependency_Table; + +typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record +{ + USHORT usSclkLow; + UCHAR ucSclkHigh; + USHORT usMclkLow; + UCHAR ucMclkHigh; + USHORT usVddc; + USHORT usVddci; +}ATOM_PPLIB_Clock_Voltage_Limit_Record; + +typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table +{ + UCHAR ucNumEntries; // Number of entries. + ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries. +}ATOM_PPLIB_Clock_Voltage_Limit_Table; + +union _ATOM_PPLIB_CAC_Leakage_Record +{ + struct + { + USHORT usVddc; // We use this field for the "fake" standardized VDDC for power calculations; For CI and newer, we use this as the real VDDC value. in CI we read it as StdVoltageHiSidd + ULONG ulLeakageValue; // For CI and newer we use this as the "fake" standar VDDC value. in CI we read it as StdVoltageLoSidd + + }; + struct + { + USHORT usVddc1; + USHORT usVddc2; + USHORT usVddc3; + }; +}; + +typedef union _ATOM_PPLIB_CAC_Leakage_Record ATOM_PPLIB_CAC_Leakage_Record; + +typedef struct _ATOM_PPLIB_CAC_Leakage_Table +{ + UCHAR ucNumEntries; // Number of entries. + ATOM_PPLIB_CAC_Leakage_Record entries[1]; // Dynamically allocate entries. +}ATOM_PPLIB_CAC_Leakage_Table; + +typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Record +{ + USHORT usVoltage; + USHORT usSclkLow; + UCHAR ucSclkHigh; + USHORT usMclkLow; + UCHAR ucMclkHigh; +}ATOM_PPLIB_PhaseSheddingLimits_Record; + +typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Table +{ + UCHAR ucNumEntries; // Number of entries. + ATOM_PPLIB_PhaseSheddingLimits_Record entries[1]; // Dynamically allocate entries. +}ATOM_PPLIB_PhaseSheddingLimits_Table; + +typedef struct _VCEClockInfo{ + USHORT usEVClkLow; + UCHAR ucEVClkHigh; + USHORT usECClkLow; + UCHAR ucECClkHigh; +}VCEClockInfo; + +typedef struct _VCEClockInfoArray{ + UCHAR ucNumEntries; + VCEClockInfo entries[1]; +}VCEClockInfoArray; + +typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record +{ + USHORT usVoltage; + UCHAR ucVCEClockInfoIndex; +}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record; + +typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table +{ + UCHAR numEntries; + ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record entries[1]; +}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table; + +typedef struct _ATOM_PPLIB_VCE_State_Record +{ + UCHAR ucVCEClockInfoIndex; + UCHAR ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary +}ATOM_PPLIB_VCE_State_Record; + +typedef struct _ATOM_PPLIB_VCE_State_Table +{ + UCHAR numEntries; + ATOM_PPLIB_VCE_State_Record entries[1]; +}ATOM_PPLIB_VCE_State_Table; + + +typedef struct _ATOM_PPLIB_VCE_Table +{ + UCHAR revid; +// VCEClockInfoArray array; +// ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table limits; +// ATOM_PPLIB_VCE_State_Table states; +}ATOM_PPLIB_VCE_Table; + + +typedef struct _UVDClockInfo{ + USHORT usVClkLow; + UCHAR ucVClkHigh; + USHORT usDClkLow; + UCHAR ucDClkHigh; +}UVDClockInfo; + +typedef struct _UVDClockInfoArray{ + UCHAR ucNumEntries; + UVDClockInfo entries[1]; +}UVDClockInfoArray; + +typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record +{ + USHORT usVoltage; + UCHAR ucUVDClockInfoIndex; +}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record; + +typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table +{ + UCHAR numEntries; + ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record entries[1]; +}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table; + +typedef struct _ATOM_PPLIB_UVD_Table +{ + UCHAR revid; +// UVDClockInfoArray array; +// ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table limits; +}ATOM_PPLIB_UVD_Table; + +typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Record +{ + USHORT usVoltage; + USHORT usSAMClockLow; + UCHAR ucSAMClockHigh; +}ATOM_PPLIB_SAMClk_Voltage_Limit_Record; + +typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Table{ + UCHAR numEntries; + ATOM_PPLIB_SAMClk_Voltage_Limit_Record entries[1]; +}ATOM_PPLIB_SAMClk_Voltage_Limit_Table; + +typedef struct _ATOM_PPLIB_SAMU_Table +{ + UCHAR revid; + ATOM_PPLIB_SAMClk_Voltage_Limit_Table limits; +}ATOM_PPLIB_SAMU_Table; + +typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Record +{ + USHORT usVoltage; + USHORT usACPClockLow; + UCHAR ucACPClockHigh; +}ATOM_PPLIB_ACPClk_Voltage_Limit_Record; + +typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Table{ + UCHAR numEntries; + ATOM_PPLIB_ACPClk_Voltage_Limit_Record entries[1]; +}ATOM_PPLIB_ACPClk_Voltage_Limit_Table; + +typedef struct _ATOM_PPLIB_ACP_Table +{ + UCHAR revid; + ATOM_PPLIB_ACPClk_Voltage_Limit_Table limits; +}ATOM_PPLIB_ACP_Table; + +typedef struct _ATOM_PowerTune_Table{ + USHORT usTDP; + USHORT usConfigurableTDP; + USHORT usTDC; + USHORT usBatteryPowerLimit; + USHORT usSmallPowerLimit; + USHORT usLowCACLeakage; + USHORT usHighCACLeakage; +}ATOM_PowerTune_Table; + +typedef struct _ATOM_PPLIB_POWERTUNE_Table +{ + UCHAR revid; + ATOM_PowerTune_Table power_tune_table; +}ATOM_PPLIB_POWERTUNE_Table; + +typedef struct _ATOM_PPLIB_POWERTUNE_Table_V1 +{ + UCHAR revid; + ATOM_PowerTune_Table power_tune_table; + USHORT usMaximumPowerDeliveryLimit; + USHORT usReserve[7]; +} ATOM_PPLIB_POWERTUNE_Table_V1; + +#define ATOM_PPM_A_A 1 +#define ATOM_PPM_A_I 2 +typedef struct _ATOM_PPLIB_PPM_Table +{ + UCHAR ucRevId; + UCHAR ucPpmDesign; //A+I or A+A + USHORT usCpuCoreNumber; + ULONG ulPlatformTDP; + ULONG ulSmallACPlatformTDP; + ULONG ulPlatformTDC; + ULONG ulSmallACPlatformTDC; + ULONG ulApuTDP; + ULONG ulDGpuTDP; + ULONG ulDGpuUlvPower; + ULONG ulTjmax; +} ATOM_PPLIB_PPM_Table; + +#pragma pack(pop) + +#endif -- 2.20.1