From f6de3d39cfc30387ce7dadb8542e4a635c706670 Mon Sep 17 00:00:00 2001 From: Dean Luick Date: Tue, 24 May 2016 12:51:00 -0700 Subject: [PATCH] IB/hfi1: Correct 8051 link parameter settings Two 8051 link settings, external device config and tuning method, were written in the wrong location and the previous settings were not cleared. For both, clear the old value and write the new value. Fixes: 8ebd4cf1852a ("staging/rdma/hfi1: Add active and optical cable support") Reviewed-by: Dennis Dalessandro Signed-off-by: Dean Luick Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.h | 6 ++++++ drivers/infiniband/hw/hfi1/platform.c | 6 ++++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/chip.h b/drivers/infiniband/hw/hfi1/chip.h index 1948706fff1a..66a327978739 100644 --- a/drivers/infiniband/hw/hfi1/chip.h +++ b/drivers/infiniband/hw/hfi1/chip.h @@ -398,6 +398,12 @@ /* Lane ID for general configuration registers */ #define GENERAL_CONFIG 4 +/* LINK_TUNING_PARAMETERS fields */ +#define TUNING_METHOD_SHIFT 24 + +/* LINK_OPTIMIZATION_SETTINGS fields */ +#define ENABLE_EXT_DEV_CONFIG_SHIFT 24 + /* LOAD_DATA 8051 command shifts and fields */ #define LOAD_DATA_FIELD_ID_SHIFT 40 #define LOAD_DATA_FIELD_ID_MASK 0xfull diff --git a/drivers/infiniband/hw/hfi1/platform.c b/drivers/infiniband/hw/hfi1/platform.c index ae0e4985cc7e..03df9322f862 100644 --- a/drivers/infiniband/hw/hfi1/platform.c +++ b/drivers/infiniband/hw/hfi1/platform.c @@ -540,7 +540,8 @@ static void apply_tunings( /* Enable external device config if channel is limiting active */ read_8051_config(ppd->dd, LINK_OPTIMIZATION_SETTINGS, GENERAL_CONFIG, &config_data); - config_data |= limiting_active; + config_data &= ~(0xff << ENABLE_EXT_DEV_CONFIG_SHIFT); + config_data |= ((u32)limiting_active << ENABLE_EXT_DEV_CONFIG_SHIFT); ret = load_8051_config(ppd->dd, LINK_OPTIMIZATION_SETTINGS, GENERAL_CONFIG, config_data); if (ret != HCMD_SUCCESS) @@ -553,7 +554,8 @@ static void apply_tunings( /* Pass tuning method to 8051 */ read_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG, &config_data); - config_data |= tuning_method; + config_data &= ~(0xff << TUNING_METHOD_SHIFT); + config_data |= ((u32)tuning_method << TUNING_METHOD_SHIFT); ret = load_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG, config_data); if (ret != HCMD_SUCCESS) -- 2.20.1