From f59838d448356feb4f0ce70785a49045d842c9c3 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 6 May 2014 02:45:31 +0400 Subject: [PATCH] ARM: shmobile: henninger: add QSPI DT support Define the Henninger board dependent part of the QSPI device node. Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-henninger.dts | 38 +++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 2e45c06dd96b..1d715a3a6bb5 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -109,6 +109,11 @@ renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; }; &scif0 { @@ -158,3 +163,36 @@ cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; -- 2.20.1