From f5439764e6ca90d72e585d5e13ed1b3f9c6ac6ed Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 10 Jul 2012 17:21:45 -0700 Subject: [PATCH] staging: comedi: rtd520: remove RtdDma0Control macro This macro uses the 'devpriv' macro which relies on a local variable having a specific name. Plus it's just a wrapper around a simple 'writeb'. Remove the macro. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/rtd520.c | 39 ++++++++++++++----------- 1 file changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 7d12380d2fab..d92c6825ba10 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -406,10 +406,6 @@ struct rtdPrivate { /* Macros to access registers */ -/* Set control for DMA 0 (write only, shadow?) */ -#define RtdDma0Control(dev, n) \ - writeb(devpriv->dma0Control = (n), devpriv->lcfg+LCFG_DMACSR0) - /* Get status for DMA 0 */ #define RtdDma0Status(dev) \ readb(devpriv->lcfg+LCFG_DMACSR0) @@ -861,19 +857,19 @@ static irqreturn_t rtd_interrupt(int irq, /* interrupt number (ignored) */ DPRINTK ("rtd520: comedi read buffer overflow (DMA) with %ld to go!\n", devpriv->aiCount); - RtdDma0Control(dev, - (devpriv->dma0Control & - ~PLX_DMA_START_BIT) - | PLX_CLEAR_DMA_INTR_BIT); + devpriv->dma0Control &= ~PLX_DMA_START_BIT; + devpriv->dma0Control |= PLX_CLEAR_DMA_INTR_BIT; + writeb(devpriv->dma0Control, + devpriv->lcfg + LCFG_DMACSR0); goto abortTransfer; } /*DPRINTK ("rtd520: DMA transfer: %ld to go, istatus %x\n", devpriv->aiCount, istatus); */ - RtdDma0Control(dev, - (devpriv-> - dma0Control & ~PLX_DMA_START_BIT) - | PLX_CLEAR_DMA_INTR_BIT); + devpriv->dma0Control &= ~PLX_DMA_START_BIT; + devpriv->dma0Control |= PLX_CLEAR_DMA_INTR_BIT; + writeb(devpriv->dma0Control, + devpriv->lcfg + LCFG_DMACSR0); if (0 == devpriv->aiCount) { /* counted down */ DPRINTK("rtd520: Samples Done (DMA).\n"); goto transferDone; @@ -1239,8 +1235,11 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) devpriv->lcfg + LCFG_ITCSR); abort_dma(dev, 0); devpriv->flags &= ~DMA0_ACTIVE; - if (readl(devpriv->lcfg + LCFG_ITCSR) & ICS_DMA0_A) - RtdDma0Control(dev, PLX_CLEAR_DMA_INTR_BIT); + if (readl(devpriv->lcfg + LCFG_ITCSR) & ICS_DMA0_A) { + devpriv->dma0Control = PLX_CLEAR_DMA_INTR_BIT; + writeb(devpriv->dma0Control, + devpriv->lcfg + LCFG_DMACSR0); + } } writel(0, devpriv->las0 + LAS0_DMA0_RESET); #endif /* USE_DMA */ @@ -1406,8 +1405,12 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) writel(readl(devpriv->lcfg + LCFG_ITCSR) | ICS_DMA0_E, devpriv->lcfg + LCFG_ITCSR); /* Must be 2 steps. See PLX app note about "Starting a DMA transfer" */ - RtdDma0Control(dev, PLX_DMA_EN_BIT); /* enable DMA (clear INTR?) */ - RtdDma0Control(dev, PLX_DMA_EN_BIT | PLX_DMA_START_BIT); /*start DMA */ + devpriv->dma0Control = PLX_DMA_EN_BIT; + writeb(devpriv->dma0Control, + devpriv->lcfg + LCFG_DMACSR0); + devpriv->dma0Control |= PLX_DMA_START_BIT; + writeb(devpriv->dma0Control, + devpriv->lcfg + LCFG_DMACSR0); DPRINTK("rtd520: Using DMA0 transfers. plxInt %x RtdInt %x\n", readl(devpriv->lcfg + LCFG_ITCSR), devpriv->intMask); #else /* USE_DMA */ @@ -1968,7 +1971,9 @@ static void rtd_detach(struct comedi_device *dev) /* Shut down any board ops by resetting it */ #ifdef USE_DMA if (devpriv->lcfg) { - RtdDma0Control(dev, 0); /* disable DMA */ + devpriv->dma0Control = 0; + writeb(devpriv->dma0Control, + devpriv->lcfg + LCFG_DMACSR0); RtdDma1Control(dev, 0); /* disable DMA */ writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR); } -- 2.20.1