From f5017cfa3591d8eaf5c792e40ff30f18e498b68c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 4 Sep 2008 20:09:14 -0700 Subject: [PATCH] x86: use cpu/common.c on 64 bit Use cpu/common.c on both 64-bit and 32-bit and remove cpu/common_64.c. We started out with this linecount: 816 arch/x86/kernel/cpu/common_64.c 805 arch/x86/kernel/cpu/common.c and the resulting common.c is 1197 lines long, so there's already 424 lines of code eliminated in this phase of the unification. Signed-off-by: Yinghai Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/Makefile | 6 +- arch/x86/kernel/cpu/common_64.c | 1197 ------------------------------- 2 files changed, 3 insertions(+), 1200 deletions(-) delete mode 100644 arch/x86/kernel/cpu/common_64.c diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 403e689df0b8..d031f248dfc0 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -3,10 +3,10 @@ # obj-y := intel_cacheinfo.o addon_cpuid_features.o -obj-y += proc.o capflags.o powerflags.o +obj-y += proc.o capflags.o powerflags.o common.o -obj-$(CONFIG_X86_32) += common.o bugs.o cmpxchg.o -obj-$(CONFIG_X86_64) += common_64.o bugs_64.o +obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o +obj-$(CONFIG_X86_64) += bugs_64.o obj-$(CONFIG_CPU_SUP_INTEL_32) += intel.o obj-$(CONFIG_CPU_SUP_INTEL_64) += intel_64.o diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c deleted file mode 100644 index eef868c97b89..000000000000 --- a/arch/x86/kernel/cpu/common_64.c +++ /dev/null @@ -1,1197 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_X86_LOCAL_APIC -#include -#include -#include -#include -#endif - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "cpu.h" - -static struct cpu_dev *this_cpu __cpuinitdata; - -#ifdef CONFIG_X86_64 -/* We need valid kernel segments for data and code in long mode too - * IRET will check the segment types kkeil 2000/10/28 - * Also sysret mandates a special GDT layout - */ -/* The TLS descriptors are currently at a different place compared to i386. - Hopefully nobody expects them at a fixed place (Wine?) */ -DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { - [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, - [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, - [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, - [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, - [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, - [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, -} }; -#else -DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { - [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } }, - [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } }, - [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } }, - [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff200 } } }, - /* - * Segments used for calling PnP BIOS have byte granularity. - * They code segments and data segments have fixed 64k limits, - * the transfer segment sizes are set at run time. - */ - /* 32-bit code */ - [GDT_ENTRY_PNPBIOS_CS32] = { { { 0x0000ffff, 0x00409a00 } } }, - /* 16-bit code */ - [GDT_ENTRY_PNPBIOS_CS16] = { { { 0x0000ffff, 0x00009a00 } } }, - /* 16-bit data */ - [GDT_ENTRY_PNPBIOS_DS] = { { { 0x0000ffff, 0x00009200 } } }, - /* 16-bit data */ - [GDT_ENTRY_PNPBIOS_TS1] = { { { 0x00000000, 0x00009200 } } }, - /* 16-bit data */ - [GDT_ENTRY_PNPBIOS_TS2] = { { { 0x00000000, 0x00009200 } } }, - /* - * The APM segments have byte granularity and their bases - * are set at run time. All have 64k limits. - */ - /* 32-bit code */ - [GDT_ENTRY_APMBIOS_BASE] = { { { 0x0000ffff, 0x00409a00 } } }, - /* 16-bit code */ - [GDT_ENTRY_APMBIOS_BASE+1] = { { { 0x0000ffff, 0x00009a00 } } }, - /* data */ - [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } }, - - [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, - [GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } }, -} }; -#endif -EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); - -#ifdef CONFIG_X86_32 -static int cachesize_override __cpuinitdata = -1; -static int disable_x86_serial_nr __cpuinitdata = 1; - -static int __init cachesize_setup(char *str) -{ - get_option(&str, &cachesize_override); - return 1; -} -__setup("cachesize=", cachesize_setup); - -static int __init x86_fxsr_setup(char *s) -{ - setup_clear_cpu_cap(X86_FEATURE_FXSR); - setup_clear_cpu_cap(X86_FEATURE_XMM); - return 1; -} -__setup("nofxsr", x86_fxsr_setup); - -static int __init x86_sep_setup(char *s) -{ - setup_clear_cpu_cap(X86_FEATURE_SEP); - return 1; -} -__setup("nosep", x86_sep_setup); - -/* Standard macro to see if a specific flag is changeable */ -static inline int flag_is_changeable_p(u32 flag) -{ - u32 f1, f2; - - asm("pushfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "movl %0,%1\n\t" - "xorl %2,%0\n\t" - "pushl %0\n\t" - "popfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "popfl\n\t" - : "=&r" (f1), "=&r" (f2) - : "ir" (flag)); - - return ((f1^f2) & flag) != 0; -} - -/* Probe for the CPUID instruction */ -static int __cpuinit have_cpuid_p(void) -{ - return flag_is_changeable_p(X86_EFLAGS_ID); -} - -static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) -{ - if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { - /* Disable processor serial number */ - unsigned long lo, hi; - rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - lo |= 0x200000; - wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - printk(KERN_NOTICE "CPU serial number disabled.\n"); - clear_cpu_cap(c, X86_FEATURE_PN); - - /* Disabling the serial number may affect the cpuid level */ - c->cpuid_level = cpuid_eax(0); - } -} - -static int __init x86_serial_nr_setup(char *s) -{ - disable_x86_serial_nr = 0; - return 1; -} -__setup("serialnumber", x86_serial_nr_setup); -#else -static inline int flag_is_changeable_p(u32 flag) -{ - return 1; -} -/* Probe for the CPUID instruction */ -static inline int have_cpuid_p(void) -{ - return 1; -} -static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c) -{ -} -#endif - -/* - * Naming convention should be: [()] - * This table only is used unless init_() below doesn't set it; - * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used - * - */ - -/* Look up CPU names by table lookup. */ -static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) -{ - struct cpu_model_info *info; - - if (c->x86_model >= 16) - return NULL; /* Range check */ - - if (!this_cpu) - return NULL; - - info = this_cpu->c_models; - - while (info && info->family) { - if (info->family == c->x86) - return info->model_names[c->x86_model]; - info++; - } - return NULL; /* Not found */ -} - -__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; - -/* Current gdt points %fs at the "master" per-cpu area: after this, - * it's on the real one. */ -void switch_to_new_gdt(void) -{ - struct desc_ptr gdt_descr; - - gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); - gdt_descr.size = GDT_SIZE - 1; - load_gdt(&gdt_descr); -#ifdef CONFIG_X86_32 - asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); -#endif -} - -static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; - -static void __cpuinit default_init(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_X86_64 - display_cacheinfo(c); -#else - /* Not much we can do here... */ - /* Check if at least it has cpuid */ - if (c->cpuid_level == -1) { - /* No cpuid. It must be an ancient CPU */ - if (c->x86 == 4) - strcpy(c->x86_model_id, "486"); - else if (c->x86 == 3) - strcpy(c->x86_model_id, "386"); - } -#endif -} - -static struct cpu_dev __cpuinitdata default_cpu = { - .c_init = default_init, - .c_vendor = "Unknown", - .c_x86_vendor = X86_VENDOR_UNKNOWN, -}; - -int __cpuinit get_model_name(struct cpuinfo_x86 *c) -{ - unsigned int *v; - char *p, *q; - - if (c->extended_cpuid_level < 0x80000004) - return 0; - - v = (unsigned int *) c->x86_model_id; - cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); - cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); - cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); - c->x86_model_id[48] = 0; - - /* Intel chips right-justify this string for some dumb reason; - undo that brain damage */ - p = q = &c->x86_model_id[0]; - while (*p == ' ') - p++; - if (p != q) { - while (*p) - *q++ = *p++; - while (q <= &c->x86_model_id[48]) - *q++ = '\0'; /* Zero-pad the rest */ - } - - return 1; -} - -void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) -{ - unsigned int n, dummy, ebx, ecx, edx, l2size; - - n = c->extended_cpuid_level; - - if (n >= 0x80000005) { - cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); - printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", - edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); - c->x86_cache_size = (ecx>>24) + (edx>>24); -#ifdef CONFIG_X86_64 - /* On K8 L1 TLB is inclusive, so don't count it */ - c->x86_tlbsize = 0; -#endif - } - - if (n < 0x80000006) /* Some chips just has a large L1. */ - return; - - cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); - l2size = ecx >> 16; - -#ifdef CONFIG_X86_64 - c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); -#else - /* do processor-specific cache resizing */ - if (this_cpu->c_size_cache) - l2size = this_cpu->c_size_cache(c, l2size); - - /* Allow user to override all this if necessary. */ - if (cachesize_override != -1) - l2size = cachesize_override; - - if (l2size == 0) - return; /* Again, no L2 cache is possible */ -#endif - - c->x86_cache_size = l2size; - - printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", - l2size, ecx & 0xFF); -} - -void __cpuinit detect_ht(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_X86_HT - u32 eax, ebx, ecx, edx; - int index_msb, core_bits; - - if (!cpu_has(c, X86_FEATURE_HT)) - return; - - if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) - goto out; - - if (cpu_has(c, X86_FEATURE_XTOPOLOGY)) - return; - - cpuid(1, &eax, &ebx, &ecx, &edx); - - smp_num_siblings = (ebx & 0xff0000) >> 16; - - if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { - - if (smp_num_siblings > NR_CPUS) { - printk(KERN_WARNING "CPU: Unsupported number of siblings %d", - smp_num_siblings); - smp_num_siblings = 1; - return; - } - - index_msb = get_count_order(smp_num_siblings); -#ifdef CONFIG_X86_64 - c->phys_proc_id = phys_pkg_id(index_msb); -#else - c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); -#endif - - smp_num_siblings = smp_num_siblings / c->x86_max_cores; - - index_msb = get_count_order(smp_num_siblings); - - core_bits = get_count_order(c->x86_max_cores); - -#ifdef CONFIG_X86_64 - c->cpu_core_id = phys_pkg_id(index_msb) & - ((1 << core_bits) - 1); -#else - c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & - ((1 << core_bits) - 1); -#endif - } - -out: - if ((c->x86_max_cores * smp_num_siblings) > 1) { - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - c->phys_proc_id); - printk(KERN_INFO "CPU: Processor Core ID: %d\n", - c->cpu_core_id); - } -#endif -} - -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) -{ - char *v = c->x86_vendor_id; - int i; - static int printed; - - for (i = 0; i < X86_VENDOR_NUM; i++) { - if (!cpu_devs[i]) - break; - - if (!strcmp(v, cpu_devs[i]->c_ident[0]) || - (cpu_devs[i]->c_ident[1] && - !strcmp(v, cpu_devs[i]->c_ident[1]))) { - this_cpu = cpu_devs[i]; - c->x86_vendor = this_cpu->c_x86_vendor; - return; - } - } - - if (!printed) { - printed++; - printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); - printk(KERN_ERR "CPU: Your system may be unstable.\n"); - } - - c->x86_vendor = X86_VENDOR_UNKNOWN; - this_cpu = &default_cpu; -} - -void __cpuinit cpu_detect(struct cpuinfo_x86 *c) -{ - /* Get vendor name */ - cpuid(0x00000000, (unsigned int *)&c->cpuid_level, - (unsigned int *)&c->x86_vendor_id[0], - (unsigned int *)&c->x86_vendor_id[8], - (unsigned int *)&c->x86_vendor_id[4]); - - c->x86 = 4; - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - u32 junk, tfms, cap0, misc; - cpuid(0x00000001, &tfms, &misc, &junk, &cap0); - c->x86 = (tfms >> 8) & 0xf; - c->x86_model = (tfms >> 4) & 0xf; - c->x86_mask = tfms & 0xf; - if (c->x86 == 0xf) - c->x86 += (tfms >> 20) & 0xff; - if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xf) << 4; - if (cap0 & (1<<19)) { - c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; - c->x86_cache_alignment = c->x86_clflush_size; - } - } -} - -static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) -{ - u32 tfms, xlvl; - u32 ebx; - - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - u32 capability, excap; - cpuid(0x00000001, &tfms, &ebx, &excap, &capability); - c->x86_capability[0] = capability; - c->x86_capability[4] = excap; - } - - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - c->extended_cpuid_level = xlvl; - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } - } - -#ifdef CONFIG_X86_64 - /* Transmeta-defined flags: level 0x80860001 */ - xlvl = cpuid_eax(0x80860000); - if ((xlvl & 0xffff0000) == 0x80860000) { - /* Don't set x86_cpuid_level here for now to not confuse. */ - if (xlvl >= 0x80860001) - c->x86_capability[2] = cpuid_edx(0x80860001); - } - - if (c->extended_cpuid_level >= 0x80000007) - c->x86_power = cpuid_edx(0x80000007); - - if (c->extended_cpuid_level >= 0x80000008) { - u32 eax = cpuid_eax(0x80000008); - - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } -#endif -} -/* - * Do minimum CPU detection early. - * Fields really needed: vendor, cpuid_level, family, model, mask, - * cache alignment. - * The others are not touched to avoid unwanted side effects. - * - * WARNING: this function is only called on the BP. Don't add code here - * that is supposed to run on all CPUs. - */ -static void __init early_identify_cpu(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_X86_64 - c->x86_clflush_size = 64; -#else - c->x86_clflush_size = 32; -#endif - c->x86_cache_alignment = c->x86_clflush_size; - - if (!have_cpuid_p()) - return; - - memset(&c->x86_capability, 0, sizeof c->x86_capability); - - c->extended_cpuid_level = 0; - - cpu_detect(c); - - get_cpu_vendor(c); - - get_cpu_cap(c); - - if (this_cpu->c_early_init) - this_cpu->c_early_init(c); - - validate_pat_support(c); -} - -void __init early_cpu_init(void) -{ - struct cpu_dev **cdev; - int count = 0; - - printk("KERNEL supported cpus:\n"); - for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) { - struct cpu_dev *cpudev = *cdev; - unsigned int j; - - if (count >= X86_VENDOR_NUM) - break; - cpu_devs[count] = cpudev; - count++; - - for (j = 0; j < 2; j++) { - if (!cpudev->c_ident[j]) - continue; - printk(" %s %s\n", cpudev->c_vendor, - cpudev->c_ident[j]); - } - } - - early_identify_cpu(&boot_cpu_data); -} - -/* - * The NOPL instruction is supposed to exist on all CPUs with - * family >= 6, unfortunately, that's not true in practice because - * of early VIA chips and (more importantly) broken virtualizers that - * are not easy to detect. Hence, probe for it based on first - * principles. - * - * Note: no 64-bit chip is known to lack these, but put the code here - * for consistency with 32 bits, and to make it utterly trivial to - * diagnose the problem should it ever surface. - */ -static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) -{ - const u32 nopl_signature = 0x888c53b1; /* Random number */ - u32 has_nopl = nopl_signature; - - clear_cpu_cap(c, X86_FEATURE_NOPL); - if (c->x86 >= 6) { - asm volatile("\n" - "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */ - "2:\n" - " .section .fixup,\"ax\"\n" - "3: xor %0,%0\n" - " jmp 2b\n" - " .previous\n" - _ASM_EXTABLE(1b,3b) - : "+a" (has_nopl)); - - if (has_nopl == nopl_signature) - set_cpu_cap(c, X86_FEATURE_NOPL); - } -} - -static void __cpuinit generic_identify(struct cpuinfo_x86 *c) -{ - if (!have_cpuid_p()) - return; - - c->extended_cpuid_level = 0; - - cpu_detect(c); - - get_cpu_vendor(c); - - get_cpu_cap(c); - - if (c->cpuid_level >= 0x00000001) { - c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF; -#ifdef CONFIG_X86_32 -# ifdef CONFIG_X86_HT - c->apicid = phys_pkg_id(c->initial_apicid, 0); -# else - c->apicid = c->initial_apicid; -# endif -#endif - -#ifdef CONFIG_X86_HT - c->phys_proc_id = c->initial_apicid; -#endif - } - - if (c->extended_cpuid_level >= 0x80000004) - get_model_name(c); /* Default name */ - - init_scattered_cpuid_features(c); - detect_nopl(c); -} - -/* - * This does the hard work of actually picking apart the CPU stuff... - */ -static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) -{ - int i; - - c->loops_per_jiffy = loops_per_jiffy; - c->x86_cache_size = -1; - c->x86_vendor = X86_VENDOR_UNKNOWN; - c->x86_model = c->x86_mask = 0; /* So far unknown... */ - c->x86_vendor_id[0] = '\0'; /* Unset */ - c->x86_model_id[0] = '\0'; /* Unset */ - c->x86_max_cores = 1; -#ifdef CONFIG_X86_64 - c->x86_coreid_bits = 0; - c->x86_clflush_size = 64; -#else - c->cpuid_level = -1; /* CPUID not detected */ - c->x86_clflush_size = 32; -#endif - c->x86_cache_alignment = c->x86_clflush_size; - memset(&c->x86_capability, 0, sizeof c->x86_capability); - - if (!have_cpuid_p()) { - /* - * First of all, decide if this is a 486 or higher - * It's a 486 if we can modify the AC flag - */ - if (flag_is_changeable_p(X86_EFLAGS_AC)) - c->x86 = 4; - else - c->x86 = 3; - } - - generic_identify(c); - - if (this_cpu->c_identify) - this_cpu->c_identify(c); - -#ifdef CONFIG_X86_64 - c->apicid = phys_pkg_id(0); -#endif - - /* - * Vendor-specific initialization. In this section we - * canonicalize the feature flags, meaning if there are - * features a certain CPU supports which CPUID doesn't - * tell us, CPUID claiming incorrect flags, or other bugs, - * we handle them here. - * - * At the end of this section, c->x86_capability better - * indicate the features this CPU genuinely supports! - */ - if (this_cpu->c_init) - this_cpu->c_init(c); - - /* Disable the PN if appropriate */ - squash_the_stupid_serial_number(c); - - /* - * The vendor-specific functions might have changed features. Now - * we do "generic changes." - */ - - /* If the model name is still unset, do table lookup. */ - if (!c->x86_model_id[0]) { - char *p; - p = table_lookup_model(c); - if (p) - strcpy(c->x86_model_id, p); - else - /* Last resort... */ - sprintf(c->x86_model_id, "%02x/%02x", - c->x86, c->x86_model); - } - -#ifdef CONFIG_X86_64 - detect_ht(c); -#endif - - /* - * On SMP, boot_cpu_data holds the common feature set between - * all CPUs; so make sure that we indicate which features are - * common between the CPUs. The first time this routine gets - * executed, c == &boot_cpu_data. - */ - if (c != &boot_cpu_data) { - /* AND the already accumulated flags with these */ - for (i = 0; i < NCAPINTS; i++) - boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; - } - - /* Clear all flags overriden by options */ - for (i = 0; i < NCAPINTS; i++) - c->x86_capability[i] &= ~cleared_cpu_caps[i]; - -#ifdef CONFIG_X86_MCE - /* Init Machine Check Exception if available. */ - mcheck_init(c); -#endif - - select_idle_routine(c); - -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) - numa_add_cpu(smp_processor_id()); -#endif -} - -void __init identify_boot_cpu(void) -{ - identify_cpu(&boot_cpu_data); -#ifdef CONFIG_X86_32 - sysenter_setup(); - enable_sep_cpu(); -#endif -} - -void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) -{ - BUG_ON(c == &boot_cpu_data); - identify_cpu(c); -#ifdef CONFIG_X86_32 - enable_sep_cpu(); -#endif - mtrr_ap_init(); -} - -struct msr_range { - unsigned min; - unsigned max; -}; - -static struct msr_range msr_range_array[] __cpuinitdata = { - { 0x00000000, 0x00000418}, - { 0xc0000000, 0xc000040b}, - { 0xc0010000, 0xc0010142}, - { 0xc0011000, 0xc001103b}, -}; - -static void __cpuinit print_cpu_msr(void) -{ - unsigned index; - u64 val; - int i; - unsigned index_min, index_max; - - for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) { - index_min = msr_range_array[i].min; - index_max = msr_range_array[i].max; - for (index = index_min; index < index_max; index++) { - if (rdmsrl_amd_safe(index, &val)) - continue; - printk(KERN_INFO " MSR%08x: %016llx\n", index, val); - } - } -} - -static int show_msr __cpuinitdata; -static __init int setup_show_msr(char *arg) -{ - int num; - - get_option(&arg, &num); - - if (num > 0) - show_msr = num; - return 1; -} -__setup("show_msr=", setup_show_msr); - -static __init int setup_noclflush(char *arg) -{ - setup_clear_cpu_cap(X86_FEATURE_CLFLSH); - return 1; -} -__setup("noclflush", setup_noclflush); - -void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) -{ - char *vendor = NULL; - - if (c->x86_vendor < X86_VENDOR_NUM) - vendor = this_cpu->c_vendor; - else if (c->cpuid_level >= 0) - vendor = c->x86_vendor_id; - - if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor))) - printk(KERN_CONT "%s ", vendor); - - if (c->x86_model_id[0]) - printk(KERN_CONT "%s", c->x86_model_id); - else - printk(KERN_CONT "%d86", c->x86); - - if (c->x86_mask || c->cpuid_level >= 0) - printk(KERN_CONT " stepping %02x\n", c->x86_mask); - else - printk(KERN_CONT "\n"); - -#ifdef CONFIG_SMP - if (c->cpu_index < show_msr) - print_cpu_msr(); -#else - if (show_msr) - print_cpu_msr(); -#endif -} - -static __init int setup_disablecpuid(char *arg) -{ - int bit; - if (get_option(&arg, &bit) && bit < NCAPINTS*32) - setup_clear_cpu_cap(bit); - else - return 0; - return 1; -} -__setup("clearcpuid=", setup_disablecpuid); - -cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; - -#ifdef CONFIG_X86_64 -struct x8664_pda **_cpu_pda __read_mostly; -EXPORT_SYMBOL(_cpu_pda); - -struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; - -char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss; - -unsigned long __supported_pte_mask __read_mostly = ~0UL; -EXPORT_SYMBOL_GPL(__supported_pte_mask); - -static int do_not_nx __cpuinitdata; - -/* noexec=on|off -Control non executable mappings for 64bit processes. - -on Enable(default) -off Disable -*/ -static int __init nonx_setup(char *str) -{ - if (!str) - return -EINVAL; - if (!strncmp(str, "on", 2)) { - __supported_pte_mask |= _PAGE_NX; - do_not_nx = 0; - } else if (!strncmp(str, "off", 3)) { - do_not_nx = 1; - __supported_pte_mask &= ~_PAGE_NX; - } - return 0; -} -early_param("noexec", nonx_setup); - -int force_personality32; - -/* noexec32=on|off -Control non executable heap for 32bit processes. -To control the stack too use noexec=off - -on PROT_READ does not imply PROT_EXEC for 32bit processes (default) -off PROT_READ implies PROT_EXEC -*/ -static int __init nonx32_setup(char *str) -{ - if (!strcmp(str, "on")) - force_personality32 &= ~READ_IMPLIES_EXEC; - else if (!strcmp(str, "off")) - force_personality32 |= READ_IMPLIES_EXEC; - return 1; -} -__setup("noexec32=", nonx32_setup); - -void pda_init(int cpu) -{ - struct x8664_pda *pda = cpu_pda(cpu); - - /* Setup up data that may be needed in __get_free_pages early */ - loadsegment(fs, 0); - loadsegment(gs, 0); - /* Memory clobbers used to order PDA accessed */ - mb(); - wrmsrl(MSR_GS_BASE, pda); - mb(); - - pda->cpunumber = cpu; - pda->irqcount = -1; - pda->kernelstack = (unsigned long)stack_thread_info() - - PDA_STACKOFFSET + THREAD_SIZE; - pda->active_mm = &init_mm; - pda->mmu_state = 0; - - if (cpu == 0) { - /* others are initialized in smpboot.c */ - pda->pcurrent = &init_task; - pda->irqstackptr = boot_cpu_stack; - pda->irqstackptr += IRQSTACKSIZE - 64; - } else { - if (!pda->irqstackptr) { - pda->irqstackptr = (char *) - __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); - if (!pda->irqstackptr) - panic("cannot allocate irqstack for cpu %d", - cpu); - pda->irqstackptr += IRQSTACKSIZE - 64; - } - - if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) - pda->nodenumber = cpu_to_node(cpu); - } -} - -char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + - DEBUG_STKSZ] __page_aligned_bss; - -extern asmlinkage void ignore_sysret(void); - -/* May not be marked __init: used by software suspend */ -void syscall_init(void) -{ - /* - * LSTAR and STAR live in a bit strange symbiosis. - * They both write to the same internal register. STAR allows to - * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip. - */ - wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); - wrmsrl(MSR_LSTAR, system_call); - wrmsrl(MSR_CSTAR, ignore_sysret); - -#ifdef CONFIG_IA32_EMULATION - syscall32_cpu_init(); -#endif - - /* Flags to clear on syscall */ - wrmsrl(MSR_SYSCALL_MASK, - X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL); -} - -void __cpuinit check_efer(void) -{ - unsigned long efer; - - rdmsrl(MSR_EFER, efer); - if (!(efer & EFER_NX) || do_not_nx) - __supported_pte_mask &= ~_PAGE_NX; -} - -unsigned long kernel_eflags; - -/* - * Copies of the original ist values from the tss are only accessed during - * debugging, no special alignment required. - */ -DEFINE_PER_CPU(struct orig_ist, orig_ist); - -#else - -/* Make sure %fs is initialized properly in idle threads */ -struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) -{ - memset(regs, 0, sizeof(struct pt_regs)); - regs->fs = __KERNEL_PERCPU; - return regs; -} -#endif - -/* - * cpu_init() initializes state that is per-CPU. Some data is already - * initialized (naturally) in the bootstrap process, such as the GDT - * and IDT. We reload them nevertheless, this function acts as a - * 'CPU state barrier', nothing should get across. - * A lot of state is already set up in PDA init for 64 bit - */ -#ifdef CONFIG_X86_64 -void __cpuinit cpu_init(void) -{ - int cpu = stack_smp_processor_id(); - struct tss_struct *t = &per_cpu(init_tss, cpu); - struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); - unsigned long v; - char *estacks = NULL; - struct task_struct *me; - int i; - - /* CPU 0 is initialised in head64.c */ - if (cpu != 0) - pda_init(cpu); - else - estacks = boot_exception_stacks; - - me = current; - - if (cpu_test_and_set(cpu, cpu_initialized)) - panic("CPU#%d already initialized!\n", cpu); - - printk(KERN_INFO "Initializing CPU#%d\n", cpu); - - clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); - - /* - * Initialize the per-CPU GDT with the boot GDT, - * and set up the GDT descriptor: - */ - - switch_to_new_gdt(); - load_idt((const struct desc_ptr *)&idt_descr); - - memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); - syscall_init(); - - wrmsrl(MSR_FS_BASE, 0); - wrmsrl(MSR_KERNEL_GS_BASE, 0); - barrier(); - - check_efer(); - if (cpu != 0 && x2apic) - enable_x2apic(); - - /* - * set up and load the per-CPU TSS - */ - if (!orig_ist->ist[0]) { - static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER - }; - for (v = 0; v < N_EXCEPTION_STACKS; v++) { - if (cpu) { - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); - if (!estacks) - panic("Cannot allocate exception " - "stack %ld %d\n", v, cpu); - } - estacks += PAGE_SIZE << order[v]; - orig_ist->ist[v] = t->x86_tss.ist[v] = - (unsigned long)estacks; - } - } - - t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); - /* - * <= is required because the CPU will access up to - * 8 bits beyond the end of the IO permission bitmap. - */ - for (i = 0; i <= IO_BITMAP_LONGS; i++) - t->io_bitmap[i] = ~0UL; - - atomic_inc(&init_mm.mm_count); - me->active_mm = &init_mm; - if (me->mm) - BUG(); - enter_lazy_tlb(&init_mm, me); - - load_sp0(t, ¤t->thread); - set_tss_desc(cpu, t); - load_TR_desc(); - load_LDT(&init_mm.context); - -#ifdef CONFIG_KGDB - /* - * If the kgdb is connected no debug regs should be altered. This - * is only applicable when KGDB and a KGDB I/O module are built - * into the kernel and you are using early debugging with - * kgdbwait. KGDB will control the kernel HW breakpoint registers. - */ - if (kgdb_connected && arch_kgdb_ops.correct_hw_break) - arch_kgdb_ops.correct_hw_break(); - else { -#endif - /* - * Clear all 6 debug registers: - */ - - set_debugreg(0UL, 0); - set_debugreg(0UL, 1); - set_debugreg(0UL, 2); - set_debugreg(0UL, 3); - set_debugreg(0UL, 6); - set_debugreg(0UL, 7); -#ifdef CONFIG_KGDB - /* If the kgdb is connected no debug regs should be altered. */ - } -#endif - - fpu_init(); - - raw_local_save_flags(kernel_eflags); - - if (is_uv_system()) - uv_cpu_init(); -} - -#else - -void __cpuinit cpu_init(void) -{ - int cpu = smp_processor_id(); - struct task_struct *curr = current; - struct tss_struct *t = &per_cpu(init_tss, cpu); - struct thread_struct *thread = &curr->thread; - - if (cpu_test_and_set(cpu, cpu_initialized)) { - printk(KERN_WARNING "CPU#%d already initialized!\n", cpu); - for (;;) local_irq_enable(); - } - - printk(KERN_INFO "Initializing CPU#%d\n", cpu); - - if (cpu_has_vme || cpu_has_tsc || cpu_has_de) - clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); - - load_idt(&idt_descr); - switch_to_new_gdt(); - - /* - * Set up and load the per-CPU TSS and LDT - */ - atomic_inc(&init_mm.mm_count); - curr->active_mm = &init_mm; - if (curr->mm) - BUG(); - enter_lazy_tlb(&init_mm, curr); - - load_sp0(t, thread); - set_tss_desc(cpu, t); - load_TR_desc(); - load_LDT(&init_mm.context); - -#ifdef CONFIG_DOUBLEFAULT - /* Set up doublefault TSS pointer in the GDT */ - __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); -#endif - - /* Clear %gs. */ - asm volatile ("mov %0, %%gs" : : "r" (0)); - - /* Clear all 6 debug registers: */ - set_debugreg(0, 0); - set_debugreg(0, 1); - set_debugreg(0, 2); - set_debugreg(0, 3); - set_debugreg(0, 6); - set_debugreg(0, 7); - - /* - * Force FPU initialization: - */ - if (cpu_has_xsave) - current_thread_info()->status = TS_XSAVE; - else - current_thread_info()->status = 0; - clear_used_math(); - mxcsr_feature_mask_init(); - - /* - * Boot processor to setup the FP and extended state context info. - */ - if (!smp_processor_id()) - init_thread_xstate(); - - xsave_init(); -} - -#ifdef CONFIG_HOTPLUG_CPU -void __cpuinit cpu_uninit(void) -{ - int cpu = raw_smp_processor_id(); - cpu_clear(cpu, cpu_initialized); - - /* lazy TLB state */ - per_cpu(cpu_tlbstate, cpu).state = 0; - per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; -} -#endif - -#endif -- 2.20.1