From f3fa9f3da5621154323775ff0efdba99dcebcee4 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Thu, 6 Oct 2011 11:26:34 -0700 Subject: [PATCH] i2c-designware: Push all register reads/writes into the core code. Move all register manipulation code into the core, also move register offset definitions to i2c-designware-core.c since the bus specific portions of the driver no longer need/use them. Signed-off-by: Dirk Brandewie Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-designware-core.c | 135 ++++++++++++++++++++ drivers/i2c/busses/i2c-designware-core.h | 104 +-------------- drivers/i2c/busses/i2c-designware-platdrv.c | 6 +- 3 files changed, 143 insertions(+), 102 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index e8b83d9029e1..b9f18ddaaa76 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -34,6 +34,108 @@ #include #include "i2c-designware-core.h" +/* + * Registers offset + */ +#define DW_IC_CON 0x0 +#define DW_IC_TAR 0x4 +#define DW_IC_DATA_CMD 0x10 +#define DW_IC_SS_SCL_HCNT 0x14 +#define DW_IC_SS_SCL_LCNT 0x18 +#define DW_IC_FS_SCL_HCNT 0x1c +#define DW_IC_FS_SCL_LCNT 0x20 +#define DW_IC_INTR_STAT 0x2c +#define DW_IC_INTR_MASK 0x30 +#define DW_IC_RAW_INTR_STAT 0x34 +#define DW_IC_RX_TL 0x38 +#define DW_IC_TX_TL 0x3c +#define DW_IC_CLR_INTR 0x40 +#define DW_IC_CLR_RX_UNDER 0x44 +#define DW_IC_CLR_RX_OVER 0x48 +#define DW_IC_CLR_TX_OVER 0x4c +#define DW_IC_CLR_RD_REQ 0x50 +#define DW_IC_CLR_TX_ABRT 0x54 +#define DW_IC_CLR_RX_DONE 0x58 +#define DW_IC_CLR_ACTIVITY 0x5c +#define DW_IC_CLR_STOP_DET 0x60 +#define DW_IC_CLR_START_DET 0x64 +#define DW_IC_CLR_GEN_CALL 0x68 +#define DW_IC_ENABLE 0x6c +#define DW_IC_STATUS 0x70 +#define DW_IC_TXFLR 0x74 +#define DW_IC_RXFLR 0x78 +#define DW_IC_TX_ABRT_SOURCE 0x80 +#define DW_IC_COMP_PARAM_1 0xf4 +#define DW_IC_COMP_TYPE 0xfc +#define DW_IC_COMP_TYPE_VALUE 0x44570140 + +#define DW_IC_INTR_RX_UNDER 0x001 +#define DW_IC_INTR_RX_OVER 0x002 +#define DW_IC_INTR_RX_FULL 0x004 +#define DW_IC_INTR_TX_OVER 0x008 +#define DW_IC_INTR_TX_EMPTY 0x010 +#define DW_IC_INTR_RD_REQ 0x020 +#define DW_IC_INTR_TX_ABRT 0x040 +#define DW_IC_INTR_RX_DONE 0x080 +#define DW_IC_INTR_ACTIVITY 0x100 +#define DW_IC_INTR_STOP_DET 0x200 +#define DW_IC_INTR_START_DET 0x400 +#define DW_IC_INTR_GEN_CALL 0x800 + +#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ + DW_IC_INTR_TX_EMPTY | \ + DW_IC_INTR_TX_ABRT | \ + DW_IC_INTR_STOP_DET) + +#define DW_IC_STATUS_ACTIVITY 0x1 + +#define DW_IC_ERR_TX_ABRT 0x1 + +/* + * status codes + */ +#define STATUS_IDLE 0x0 +#define STATUS_WRITE_IN_PROGRESS 0x1 +#define STATUS_READ_IN_PROGRESS 0x2 + +#define TIMEOUT 20 /* ms */ + +/* + * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register + * + * only expected abort codes are listed here + * refer to the datasheet for the full list + */ +#define ABRT_7B_ADDR_NOACK 0 +#define ABRT_10ADDR1_NOACK 1 +#define ABRT_10ADDR2_NOACK 2 +#define ABRT_TXDATA_NOACK 3 +#define ABRT_GCALL_NOACK 4 +#define ABRT_GCALL_READ 5 +#define ABRT_SBYTE_ACKDET 7 +#define ABRT_SBYTE_NORSTRT 9 +#define ABRT_10B_RD_NORSTRT 10 +#define ABRT_MASTER_DIS 11 +#define ARB_LOST 12 + +#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) +#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) +#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK) +#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK) +#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK) +#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ) +#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET) +#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT) +#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) +#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) +#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) + +#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ + DW_IC_TX_ABRT_10ADDR1_NOACK | \ + DW_IC_TX_ABRT_10ADDR2_NOACK | \ + DW_IC_TX_ABRT_TXDATA_NOACK | \ + DW_IC_TX_ABRT_GCALL_NOACK) + static char *abort_sources[] = { [ABRT_7B_ADDR_NOACK] = "slave address not acknowledged (7bit mode)", @@ -562,3 +664,36 @@ tx_aborted: return IRQ_HANDLED; } + +void i2c_dw_enable(struct dw_i2c_dev *dev) +{ + /* Enable the adapter */ + dw_writel(dev, 1, DW_IC_ENABLE); +} + +void i2c_dw_disable(struct dw_i2c_dev *dev) +{ + int ret; + + /* Disable controller */ + dw_writel(dev, 0, DW_IC_ENABLE); + + /* Disable all interupts */ + dw_writel(dev, 0, DW_IC_INTR_MASK); + dw_readl(dev, DW_IC_CLR_INTR); +} + +void i2c_dw_clear_int(struct dw_i2c_dev *dev) +{ + dw_readl(dev, DW_IC_CLR_INTR); +} + +void i2c_dw_disable_int(struct dw_i2c_dev *dev) +{ + dw_writel(dev, 0, DW_IC_INTR_MASK); +} + +u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) +{ + return dw_readl(dev, DW_IC_COMP_PARAM_1); +} diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 29386215fe3c..dc016e2afe9c 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -26,40 +26,6 @@ * */ -/* - * Registers offset - */ -#define DW_IC_CON 0x0 -#define DW_IC_TAR 0x4 -#define DW_IC_DATA_CMD 0x10 -#define DW_IC_SS_SCL_HCNT 0x14 -#define DW_IC_SS_SCL_LCNT 0x18 -#define DW_IC_FS_SCL_HCNT 0x1c -#define DW_IC_FS_SCL_LCNT 0x20 -#define DW_IC_INTR_STAT 0x2c -#define DW_IC_INTR_MASK 0x30 -#define DW_IC_RAW_INTR_STAT 0x34 -#define DW_IC_RX_TL 0x38 -#define DW_IC_TX_TL 0x3c -#define DW_IC_CLR_INTR 0x40 -#define DW_IC_CLR_RX_UNDER 0x44 -#define DW_IC_CLR_RX_OVER 0x48 -#define DW_IC_CLR_TX_OVER 0x4c -#define DW_IC_CLR_RD_REQ 0x50 -#define DW_IC_CLR_TX_ABRT 0x54 -#define DW_IC_CLR_RX_DONE 0x58 -#define DW_IC_CLR_ACTIVITY 0x5c -#define DW_IC_CLR_STOP_DET 0x60 -#define DW_IC_CLR_START_DET 0x64 -#define DW_IC_CLR_GEN_CALL 0x68 -#define DW_IC_ENABLE 0x6c -#define DW_IC_STATUS 0x70 -#define DW_IC_TXFLR 0x74 -#define DW_IC_RXFLR 0x78 -#define DW_IC_TX_ABRT_SOURCE 0x80 -#define DW_IC_COMP_PARAM_1 0xf4 -#define DW_IC_COMP_TYPE 0xfc -#define DW_IC_COMP_TYPE_VALUE 0x44570140 #define DW_IC_CON_MASTER 0x1 #define DW_IC_CON_SPEED_STD 0x2 @@ -68,72 +34,7 @@ #define DW_IC_CON_RESTART_EN 0x20 #define DW_IC_CON_SLAVE_DISABLE 0x40 -#define DW_IC_INTR_RX_UNDER 0x001 -#define DW_IC_INTR_RX_OVER 0x002 -#define DW_IC_INTR_RX_FULL 0x004 -#define DW_IC_INTR_TX_OVER 0x008 -#define DW_IC_INTR_TX_EMPTY 0x010 -#define DW_IC_INTR_RD_REQ 0x020 -#define DW_IC_INTR_TX_ABRT 0x040 -#define DW_IC_INTR_RX_DONE 0x080 -#define DW_IC_INTR_ACTIVITY 0x100 -#define DW_IC_INTR_STOP_DET 0x200 -#define DW_IC_INTR_START_DET 0x400 -#define DW_IC_INTR_GEN_CALL 0x800 - -#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ - DW_IC_INTR_TX_EMPTY | \ - DW_IC_INTR_TX_ABRT | \ - DW_IC_INTR_STOP_DET) - -#define DW_IC_STATUS_ACTIVITY 0x1 - -#define DW_IC_ERR_TX_ABRT 0x1 - -/* - * status codes - */ -#define STATUS_IDLE 0x0 -#define STATUS_WRITE_IN_PROGRESS 0x1 -#define STATUS_READ_IN_PROGRESS 0x2 - -#define TIMEOUT 20 /* ms */ - -/* - * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register - * - * only expected abort codes are listed here - * refer to the datasheet for the full list - */ -#define ABRT_7B_ADDR_NOACK 0 -#define ABRT_10ADDR1_NOACK 1 -#define ABRT_10ADDR2_NOACK 2 -#define ABRT_TXDATA_NOACK 3 -#define ABRT_GCALL_NOACK 4 -#define ABRT_GCALL_READ 5 -#define ABRT_SBYTE_ACKDET 7 -#define ABRT_SBYTE_NORSTRT 9 -#define ABRT_10B_RD_NORSTRT 10 -#define ABRT_MASTER_DIS 11 -#define ARB_LOST 12 - -#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) -#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) -#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK) -#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK) -#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK) -#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ) -#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET) -#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT) -#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) -#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) -#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) -#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ - DW_IC_TX_ABRT_10ADDR1_NOACK | \ - DW_IC_TX_ABRT_10ADDR2_NOACK | \ - DW_IC_TX_ABRT_TXDATA_NOACK | \ - DW_IC_TX_ABRT_GCALL_NOACK) /** * struct dw_i2c_dev - private i2c-designware data * @dev: driver model device node @@ -195,3 +96,8 @@ extern int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num); extern u32 i2c_dw_func(struct i2c_adapter *adap); extern irqreturn_t i2c_dw_isr(int this_irq, void *dev_id); +extern void i2c_dw_enable(struct dw_i2c_dev *dev); +extern void i2c_dw_disable(struct dw_i2c_dev *dev); +extern void i2c_dw_clear_int(struct dw_i2c_dev *dev); +extern void i2c_dw_disable_int(struct dw_i2c_dev *dev); +extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 1258cae3555d..2d3657ab1258 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -113,7 +113,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev) goto err_unuse_clocks; } { - u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1); + u32 param1 = i2c_dw_read_comp_param(dev); dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1; dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1; @@ -122,7 +122,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev) if (r) goto err_iounmap; - dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */ + i2c_dw_disable_int(dev); r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev); if (r) { dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); @@ -178,7 +178,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev) clk_put(dev->clk); dev->clk = NULL; - dw_writel(dev, 0, DW_IC_ENABLE); + i2c_dw_disable(dev); free_irq(dev->irq, dev); kfree(dev); -- 2.20.1