From f3c91c1deaf8493526d8216be94c33e963f00962 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 21 Nov 2010 09:56:00 +0000 Subject: [PATCH] drm/i915: Only save/restore cursor regs if !KMS Under KMS, restoring the cursor is handled upon modeswitch in order to avoid enabling an undefined set of registers. At the moment, the cursor is restored before the aperture and modes are fully setup causing some invalid access during resume, such as: PGTBL_ER: 0x00040000 Invalid GTT entry during Cursor Fetch Fix this by only performing cursor register save/restore under UMS where it is done in the correct sequence. Reported-by: Arkadiusz Miskiewicz Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_suspend.c | 40 ++++++++++++++--------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 454c064f8ef7..42729d25da58 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -239,6 +239,16 @@ static void i915_save_modeset_reg(struct drm_device *dev) if (drm_core_check_feature(dev, DRIVER_MODESET)) return; + /* Cursor state */ + dev_priv->saveCURACNTR = I915_READ(CURACNTR); + dev_priv->saveCURAPOS = I915_READ(CURAPOS); + dev_priv->saveCURABASE = I915_READ(CURABASE); + dev_priv->saveCURBCNTR = I915_READ(CURBCNTR); + dev_priv->saveCURBPOS = I915_READ(CURBPOS); + dev_priv->saveCURBBASE = I915_READ(CURBBASE); + if (IS_GEN2(dev)) + dev_priv->saveCURSIZE = I915_READ(CURSIZE); + if (HAS_PCH_SPLIT(dev)) { dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL); dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL); @@ -529,6 +539,16 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); I915_WRITE(DSPBADDR, I915_READ(DSPBADDR)); + /* Cursor state */ + I915_WRITE(CURAPOS, dev_priv->saveCURAPOS); + I915_WRITE(CURACNTR, dev_priv->saveCURACNTR); + I915_WRITE(CURABASE, dev_priv->saveCURABASE); + I915_WRITE(CURBPOS, dev_priv->saveCURBPOS); + I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR); + I915_WRITE(CURBBASE, dev_priv->saveCURBBASE); + if (IS_GEN2(dev)) + I915_WRITE(CURSIZE, dev_priv->saveCURSIZE); + return; } @@ -543,16 +563,6 @@ void i915_save_display(struct drm_device *dev) /* Don't save them in KMS mode */ i915_save_modeset_reg(dev); - /* Cursor state */ - dev_priv->saveCURACNTR = I915_READ(CURACNTR); - dev_priv->saveCURAPOS = I915_READ(CURAPOS); - dev_priv->saveCURABASE = I915_READ(CURABASE); - dev_priv->saveCURBCNTR = I915_READ(CURBCNTR); - dev_priv->saveCURBPOS = I915_READ(CURBPOS); - dev_priv->saveCURBBASE = I915_READ(CURBBASE); - if (IS_GEN2(dev)) - dev_priv->saveCURSIZE = I915_READ(CURSIZE); - /* CRT state */ if (HAS_PCH_SPLIT(dev)) { dev_priv->saveADPA = I915_READ(PCH_ADPA); @@ -657,16 +667,6 @@ void i915_restore_display(struct drm_device *dev) /* Don't restore them in KMS mode */ i915_restore_modeset_reg(dev); - /* Cursor state */ - I915_WRITE(CURAPOS, dev_priv->saveCURAPOS); - I915_WRITE(CURACNTR, dev_priv->saveCURACNTR); - I915_WRITE(CURABASE, dev_priv->saveCURABASE); - I915_WRITE(CURBPOS, dev_priv->saveCURBPOS); - I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR); - I915_WRITE(CURBBASE, dev_priv->saveCURBBASE); - if (IS_GEN2(dev)) - I915_WRITE(CURSIZE, dev_priv->saveCURSIZE); - /* CRT state */ if (HAS_PCH_SPLIT(dev)) I915_WRITE(PCH_ADPA, dev_priv->saveADPA); -- 2.20.1