From f35dd69ba341bda3790713b9e964483934b995e1 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Tue, 21 Aug 2012 21:57:15 -0700 Subject: [PATCH] Input: imx_keypad - reset the hardware before enabling Ensure the hardware is correctly initialized before requesting the interrupt, otherwise if a key was already touched since power-on the kernel enters an interrupt loop. To fix this issue we clear pending interrupt sources. We also have to make sure clk is enabled while changing the keypad registers. Signed-off-by: Michael Grzeschik Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/imx_keypad.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index ff4c0a87a25..ce68e361558 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -358,6 +358,7 @@ static void imx_keypad_inhibit(struct imx_keypad *keypad) /* Inhibit KDI and KRI interrupts. */ reg_val = readw(keypad->mmio_base + KPSR); reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE); + reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD; writew(reg_val, keypad->mmio_base + KPSR); /* Colums as open drain and disable all rows */ @@ -515,7 +516,9 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) input_set_drvdata(input_dev, keypad); /* Ensure that the keypad will stay dormant until opened */ + clk_enable(keypad->clk); imx_keypad_inhibit(keypad); + clk_disable(keypad->clk); error = request_irq(irq, imx_keypad_irq_handler, 0, pdev->name, keypad); -- 2.20.1