From f327c686d3ba44eda79a2d9e02a6a242e0b75787 Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Tue, 20 Jun 2017 14:15:15 -0700 Subject: [PATCH] i2c: aspeed: added driver for Aspeed I2C Added initial master support for Aspeed I2C controller. Supports fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed. Signed-off-by: Brendan Higgins Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-aspeed.c | 690 ++++++++++++++++++++++++++++++++ 3 files changed, 701 insertions(+) create mode 100644 drivers/i2c/busses/i2c-aspeed.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index ed7106e48ba4..ceb4df4e92ab 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -328,6 +328,16 @@ config I2C_POWERMAC comment "I2C system bus drivers (mostly embedded / system-on-chip)" +config I2C_ASPEED + tristate "Aspeed I2C Controller" + depends on ARCH_ASPEED || COMPILE_TEST + help + If you say yes to this option, support will be included for the + Aspeed I2C controller. + + This driver can also be built as a module. If so, the module + will be called i2c-aspeed. + config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" depends on ARCH_AT91 diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index c89a4314c563..a43f28819a8c 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o # Embedded system I2C/SMBus host controller drivers +obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c new file mode 100644 index 000000000000..55f241f2cfcc --- /dev/null +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -0,0 +1,690 @@ +/* + * Aspeed 24XX/25XX I2C Controller. + * + * Copyright (C) 2012-2017 ASPEED Technology Inc. + * Copyright 2017 IBM Corporation + * Copyright 2017 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* I2C Register */ +#define ASPEED_I2C_FUN_CTRL_REG 0x00 +#define ASPEED_I2C_AC_TIMING_REG1 0x04 +#define ASPEED_I2C_AC_TIMING_REG2 0x08 +#define ASPEED_I2C_INTR_CTRL_REG 0x0c +#define ASPEED_I2C_INTR_STS_REG 0x10 +#define ASPEED_I2C_CMD_REG 0x14 +#define ASPEED_I2C_DEV_ADDR_REG 0x18 +#define ASPEED_I2C_BYTE_BUF_REG 0x20 + +/* Global Register Definition */ +/* 0x00 : I2C Interrupt Status Register */ +/* 0x08 : I2C Interrupt Target Assignment */ + +/* Device Register Definition */ +/* 0x00 : I2CD Function Control Register */ +#define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15) +#define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8) +#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7) +#define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6) +#define ASPEED_I2CD_MASTER_EN BIT(0) + +/* 0x04 : I2CD Clock and AC Timing Control Register #1 */ +#define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT 16 +#define ASPEED_I2CD_TIME_SCL_HIGH_MASK GENMASK(19, 16) +#define ASPEED_I2CD_TIME_SCL_LOW_SHIFT 12 +#define ASPEED_I2CD_TIME_SCL_LOW_MASK GENMASK(15, 12) +#define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK GENMASK(3, 0) +#define ASPEED_I2CD_TIME_SCL_REG_MAX GENMASK(3, 0) +/* 0x08 : I2CD Clock and AC Timing Control Register #2 */ +#define ASPEED_NO_TIMEOUT_CTRL 0 + +/* 0x0c : I2CD Interrupt Control Register & + * 0x10 : I2CD Interrupt Status Register + * + * These share bit definitions, so use the same values for the enable & + * status bits. + */ +#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14) +#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13) +#define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6) +#define ASPEED_I2CD_INTR_ABNORMAL BIT(5) +#define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4) +#define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3) +#define ASPEED_I2CD_INTR_RX_DONE BIT(2) +#define ASPEED_I2CD_INTR_TX_NAK BIT(1) +#define ASPEED_I2CD_INTR_TX_ACK BIT(0) +#define ASPEED_I2CD_INTR_ALL \ + (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \ + ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \ + ASPEED_I2CD_INTR_SCL_TIMEOUT | \ + ASPEED_I2CD_INTR_ABNORMAL | \ + ASPEED_I2CD_INTR_NORMAL_STOP | \ + ASPEED_I2CD_INTR_ARBIT_LOSS | \ + ASPEED_I2CD_INTR_RX_DONE | \ + ASPEED_I2CD_INTR_TX_NAK | \ + ASPEED_I2CD_INTR_TX_ACK) + +/* 0x14 : I2CD Command/Status Register */ +#define ASPEED_I2CD_SCL_LINE_STS BIT(18) +#define ASPEED_I2CD_SDA_LINE_STS BIT(17) +#define ASPEED_I2CD_BUS_BUSY_STS BIT(16) +#define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11) + +/* Command Bit */ +#define ASPEED_I2CD_M_STOP_CMD BIT(5) +#define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4) +#define ASPEED_I2CD_M_RX_CMD BIT(3) +#define ASPEED_I2CD_S_TX_CMD BIT(2) +#define ASPEED_I2CD_M_TX_CMD BIT(1) +#define ASPEED_I2CD_M_START_CMD BIT(0) + +enum aspeed_i2c_master_state { + ASPEED_I2C_MASTER_START, + ASPEED_I2C_MASTER_TX_FIRST, + ASPEED_I2C_MASTER_TX, + ASPEED_I2C_MASTER_RX_FIRST, + ASPEED_I2C_MASTER_RX, + ASPEED_I2C_MASTER_STOP, + ASPEED_I2C_MASTER_INACTIVE, +}; + +struct aspeed_i2c_bus { + struct i2c_adapter adap; + struct device *dev; + void __iomem *base; + /* Synchronizes I/O mem access to base. */ + spinlock_t lock; + struct completion cmd_complete; + unsigned long parent_clk_frequency; + u32 bus_frequency; + /* Transaction state. */ + enum aspeed_i2c_master_state master_state; + struct i2c_msg *msgs; + size_t buf_index; + size_t msgs_index; + size_t msgs_count; + bool send_stop; + int cmd_err; + /* Protected only by i2c_lock_bus */ + int master_xfer_result; +}; + +static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus); + +static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus) +{ + unsigned long time_left, flags; + int ret = 0; + u32 command; + + spin_lock_irqsave(&bus->lock, flags); + command = readl(bus->base + ASPEED_I2C_CMD_REG); + + if (command & ASPEED_I2CD_SDA_LINE_STS) { + /* Bus is idle: no recovery needed. */ + if (command & ASPEED_I2CD_SCL_LINE_STS) + goto out; + dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n", + command); + + reinit_completion(&bus->cmd_complete); + writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); + spin_unlock_irqrestore(&bus->lock, flags); + + time_left = wait_for_completion_timeout( + &bus->cmd_complete, bus->adap.timeout); + + spin_lock_irqsave(&bus->lock, flags); + if (time_left == 0) + goto reset_out; + else if (bus->cmd_err) + goto reset_out; + /* Recovery failed. */ + else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & + ASPEED_I2CD_SCL_LINE_STS)) + goto reset_out; + /* Bus error. */ + } else { + dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n", + command); + + reinit_completion(&bus->cmd_complete); + /* Writes 1 to 8 SCL clock cycles until SDA is released. */ + writel(ASPEED_I2CD_BUS_RECOVER_CMD, + bus->base + ASPEED_I2C_CMD_REG); + spin_unlock_irqrestore(&bus->lock, flags); + + time_left = wait_for_completion_timeout( + &bus->cmd_complete, bus->adap.timeout); + + spin_lock_irqsave(&bus->lock, flags); + if (time_left == 0) + goto reset_out; + else if (bus->cmd_err) + goto reset_out; + /* Recovery failed. */ + else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & + ASPEED_I2CD_SDA_LINE_STS)) + goto reset_out; + } + +out: + spin_unlock_irqrestore(&bus->lock, flags); + + return ret; + +reset_out: + spin_unlock_irqrestore(&bus->lock, flags); + + return aspeed_i2c_reset(bus); +} + +/* precondition: bus.lock has been acquired. */ +static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) +{ + u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD; + struct i2c_msg *msg = &bus->msgs[bus->msgs_index]; + u8 slave_addr = msg->addr << 1; + + bus->master_state = ASPEED_I2C_MASTER_START; + bus->buf_index = 0; + + if (msg->flags & I2C_M_RD) { + slave_addr |= 1; + command |= ASPEED_I2CD_M_RX_CMD; + /* Need to let the hardware know to NACK after RX. */ + if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) + command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + } + + writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG); + writel(command, bus->base + ASPEED_I2C_CMD_REG); +} + +/* precondition: bus.lock has been acquired. */ +static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus) +{ + bus->master_state = ASPEED_I2C_MASTER_STOP; + writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); +} + +/* precondition: bus.lock has been acquired. */ +static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus) +{ + if (bus->msgs_index + 1 < bus->msgs_count) { + bus->msgs_index++; + aspeed_i2c_do_start(bus); + } else { + aspeed_i2c_do_stop(bus); + } +} + +static int aspeed_i2c_is_irq_error(u32 irq_status) +{ + if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS) + return -EAGAIN; + if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | + ASPEED_I2CD_INTR_SCL_TIMEOUT)) + return -EBUSY; + if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL)) + return -EPROTO; + + return 0; +} + +static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus) +{ + u32 irq_status, status_ack = 0, command = 0; + struct i2c_msg *msg; + u8 recv_byte; + int ret; + + spin_lock(&bus->lock); + irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG); + /* Ack all interrupt bits. */ + writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG); + + if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) { + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE; + goto out_complete; + } + + /* + * We encountered an interrupt that reports an error: the hardware + * should clear the command queue effectively taking us back to the + * INACTIVE state. + */ + ret = aspeed_i2c_is_irq_error(irq_status); + if (ret < 0) { + dev_dbg(bus->dev, "received error interrupt: 0x%08x", + irq_status); + bus->cmd_err = ret; + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + goto out_complete; + } + + /* We are in an invalid state; reset bus to a known state. */ + if (!bus->msgs && bus->master_state != ASPEED_I2C_MASTER_STOP) { + dev_err(bus->dev, "bus in unknown state"); + bus->cmd_err = -EIO; + aspeed_i2c_do_stop(bus); + goto out_no_complete; + } + msg = &bus->msgs[bus->msgs_index]; + + /* + * START is a special case because we still have to handle a subsequent + * TX or RX immediately after we handle it, so we handle it here and + * then update the state and handle the new state below. + */ + if (bus->master_state == ASPEED_I2C_MASTER_START) { + if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { + pr_devel("no slave present at %02x", msg->addr); + status_ack |= ASPEED_I2CD_INTR_TX_NAK; + bus->cmd_err = -ENXIO; + aspeed_i2c_do_stop(bus); + goto out_no_complete; + } + status_ack |= ASPEED_I2CD_INTR_TX_ACK; + if (msg->len == 0) { /* SMBUS_QUICK */ + aspeed_i2c_do_stop(bus); + goto out_no_complete; + } + if (msg->flags & I2C_M_RD) + bus->master_state = ASPEED_I2C_MASTER_RX_FIRST; + else + bus->master_state = ASPEED_I2C_MASTER_TX_FIRST; + } + + switch (bus->master_state) { + case ASPEED_I2C_MASTER_TX: + if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) { + dev_dbg(bus->dev, "slave NACKed TX"); + status_ack |= ASPEED_I2CD_INTR_TX_NAK; + goto error_and_stop; + } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { + dev_err(bus->dev, "slave failed to ACK TX"); + goto error_and_stop; + } + status_ack |= ASPEED_I2CD_INTR_TX_ACK; + /* fallthrough intended */ + case ASPEED_I2C_MASTER_TX_FIRST: + if (bus->buf_index < msg->len) { + bus->master_state = ASPEED_I2C_MASTER_TX; + writel(msg->buf[bus->buf_index++], + bus->base + ASPEED_I2C_BYTE_BUF_REG); + writel(ASPEED_I2CD_M_TX_CMD, + bus->base + ASPEED_I2C_CMD_REG); + } else { + aspeed_i2c_next_msg_or_stop(bus); + } + goto out_no_complete; + case ASPEED_I2C_MASTER_RX_FIRST: + /* RX may not have completed yet (only address cycle) */ + if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE)) + goto out_no_complete; + /* fallthrough intended */ + case ASPEED_I2C_MASTER_RX: + if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) { + dev_err(bus->dev, "master failed to RX"); + goto error_and_stop; + } + status_ack |= ASPEED_I2CD_INTR_RX_DONE; + + recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; + msg->buf[bus->buf_index++] = recv_byte; + + if (msg->flags & I2C_M_RECV_LEN) { + if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) { + bus->cmd_err = -EPROTO; + aspeed_i2c_do_stop(bus); + goto out_no_complete; + } + msg->len = recv_byte + + ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1); + msg->flags &= ~I2C_M_RECV_LEN; + } + + if (bus->buf_index < msg->len) { + bus->master_state = ASPEED_I2C_MASTER_RX; + command = ASPEED_I2CD_M_RX_CMD; + if (bus->buf_index + 1 == msg->len) + command |= ASPEED_I2CD_M_S_RX_CMD_LAST; + writel(command, bus->base + ASPEED_I2C_CMD_REG); + } else { + aspeed_i2c_next_msg_or_stop(bus); + } + goto out_no_complete; + case ASPEED_I2C_MASTER_STOP: + if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) { + dev_err(bus->dev, "master failed to STOP"); + bus->cmd_err = -EIO; + /* Do not STOP as we have already tried. */ + } else { + status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP; + } + + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + goto out_complete; + case ASPEED_I2C_MASTER_INACTIVE: + dev_err(bus->dev, + "master received interrupt 0x%08x, but is inactive", + irq_status); + bus->cmd_err = -EIO; + /* Do not STOP as we should be inactive. */ + goto out_complete; + default: + WARN(1, "unknown master state\n"); + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + bus->cmd_err = -EINVAL; + goto out_complete; + } +error_and_stop: + bus->cmd_err = -EIO; + aspeed_i2c_do_stop(bus); + goto out_no_complete; +out_complete: + bus->msgs = NULL; + if (bus->cmd_err) + bus->master_xfer_result = bus->cmd_err; + else + bus->master_xfer_result = bus->msgs_index + 1; + complete(&bus->cmd_complete); +out_no_complete: + if (irq_status != status_ack) + dev_err(bus->dev, + "irq handled != irq. expected 0x%08x, but was 0x%08x\n", + irq_status, status_ack); + spin_unlock(&bus->lock); + return !!irq_status; +} + +static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) +{ + struct aspeed_i2c_bus *bus = dev_id; + + return aspeed_i2c_master_irq(bus) ? IRQ_HANDLED : IRQ_NONE; +} + +static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap); + unsigned long time_left, flags; + int ret = 0; + + spin_lock_irqsave(&bus->lock, flags); + bus->cmd_err = 0; + + /* If bus is busy, attempt recovery. We assume a single master + * environment. + */ + if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) { + spin_unlock_irqrestore(&bus->lock, flags); + ret = aspeed_i2c_recover_bus(bus); + if (ret) + return ret; + spin_lock_irqsave(&bus->lock, flags); + } + + bus->cmd_err = 0; + bus->msgs = msgs; + bus->msgs_index = 0; + bus->msgs_count = num; + + reinit_completion(&bus->cmd_complete); + aspeed_i2c_do_start(bus); + spin_unlock_irqrestore(&bus->lock, flags); + + time_left = wait_for_completion_timeout(&bus->cmd_complete, + bus->adap.timeout); + + if (time_left == 0) + return -ETIMEDOUT; + else + return bus->master_xfer_result; +} + +static u32 aspeed_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static const struct i2c_algorithm aspeed_i2c_algo = { + .master_xfer = aspeed_i2c_master_xfer, + .functionality = aspeed_i2c_functionality, +}; + +static u32 aspeed_i2c_get_clk_reg_val(u32 divisor) +{ + u32 base_clk, clk_high, clk_low, tmp; + + /* + * The actual clock frequency of SCL is: + * SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low)) + * = APB_freq / divisor + * where base_freq is a programmable clock divider; its value is + * base_freq = 1 << base_clk + * SCL_high is the number of base_freq clock cycles that SCL stays high + * and SCL_low is the number of base_freq clock cycles that SCL stays + * low for a period of SCL. + * The actual register has a minimum SCL_high and SCL_low minimum of 1; + * thus, they start counting at zero. So + * SCL_high = clk_high + 1 + * SCL_low = clk_low + 1 + * Thus, + * SCL_freq = APB_freq / + * ((1 << base_clk) * (clk_high + 1 + clk_low + 1)) + * The documentation recommends clk_high >= 8 and clk_low >= 7 when + * possible; this last constraint gives us the following solution: + */ + base_clk = divisor > 33 ? ilog2((divisor - 1) / 32) + 1 : 0; + tmp = divisor / (1 << base_clk); + clk_high = tmp / 2 + tmp % 2; + clk_low = tmp - clk_high; + + clk_high -= 1; + clk_low -= 1; + + return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT) + & ASPEED_I2CD_TIME_SCL_HIGH_MASK) + | ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT) + & ASPEED_I2CD_TIME_SCL_LOW_MASK) + | (base_clk & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK); +} + +/* precondition: bus.lock has been acquired. */ +static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus) +{ + u32 divisor, clk_reg_val; + + divisor = bus->parent_clk_frequency / bus->bus_frequency; + clk_reg_val = aspeed_i2c_get_clk_reg_val(divisor); + writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1); + writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2); + + return 0; +} + +/* precondition: bus.lock has been acquired. */ +static int aspeed_i2c_init(struct aspeed_i2c_bus *bus, + struct platform_device *pdev) +{ + u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN; + int ret; + + /* Disable everything. */ + writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); + + ret = aspeed_i2c_init_clk(bus); + if (ret < 0) + return ret; + + if (!of_property_read_bool(pdev->dev.of_node, "multi-master")) + fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS; + + /* Enable Master Mode */ + writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg, + bus->base + ASPEED_I2C_FUN_CTRL_REG); + + /* Set interrupt generation of I2C controller */ + writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG); + + return 0; +} + +static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus) +{ + struct platform_device *pdev = to_platform_device(bus->dev); + unsigned long flags; + int ret; + + spin_lock_irqsave(&bus->lock, flags); + + /* Disable and ack all interrupts. */ + writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); + writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); + + ret = aspeed_i2c_init(bus, pdev); + + spin_unlock_irqrestore(&bus->lock, flags); + + return ret; +} + +static int aspeed_i2c_probe_bus(struct platform_device *pdev) +{ + struct aspeed_i2c_bus *bus; + struct clk *parent_clk; + struct resource *res; + int irq, ret; + + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); + if (!bus) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + bus->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(bus->base)) + return PTR_ERR(bus->base); + + parent_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(parent_clk)) + return PTR_ERR(parent_clk); + bus->parent_clk_frequency = clk_get_rate(parent_clk); + /* We just need the clock rate, we don't actually use the clk object. */ + devm_clk_put(&pdev->dev, parent_clk); + + ret = of_property_read_u32(pdev->dev.of_node, + "bus-frequency", &bus->bus_frequency); + if (ret < 0) { + dev_err(&pdev->dev, + "Could not read bus-frequency property\n"); + bus->bus_frequency = 100000; + } + + /* Initialize the I2C adapter */ + spin_lock_init(&bus->lock); + init_completion(&bus->cmd_complete); + bus->adap.owner = THIS_MODULE; + bus->adap.retries = 0; + bus->adap.timeout = 5 * HZ; + bus->adap.algo = &aspeed_i2c_algo; + bus->adap.dev.parent = &pdev->dev; + bus->adap.dev.of_node = pdev->dev.of_node; + strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name)); + i2c_set_adapdata(&bus->adap, bus); + + bus->dev = &pdev->dev; + + /* Clean up any left over interrupt state. */ + writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); + writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); + /* + * bus.lock does not need to be held because the interrupt handler has + * not been enabled yet. + */ + ret = aspeed_i2c_init(bus, pdev); + if (ret < 0) + return ret; + + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq, + 0, dev_name(&pdev->dev), bus); + if (ret < 0) + return ret; + + ret = i2c_add_adapter(&bus->adap); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, bus); + + dev_info(bus->dev, "i2c bus %d registered, irq %d\n", + bus->adap.nr, irq); + + return 0; +} + +static int aspeed_i2c_remove_bus(struct platform_device *pdev) +{ + struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev); + unsigned long flags; + + spin_lock_irqsave(&bus->lock, flags); + + /* Disable everything. */ + writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); + writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); + + spin_unlock_irqrestore(&bus->lock, flags); + + i2c_del_adapter(&bus->adap); + + return 0; +} + +static const struct of_device_id aspeed_i2c_bus_of_table[] = { + { .compatible = "aspeed,ast2400-i2c-bus", }, + { .compatible = "aspeed,ast2500-i2c-bus", }, + { }, +}; +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table); + +static struct platform_driver aspeed_i2c_bus_driver = { + .probe = aspeed_i2c_probe_bus, + .remove = aspeed_i2c_remove_bus, + .driver = { + .name = "aspeed-i2c-bus", + .of_match_table = aspeed_i2c_bus_of_table, + }, +}; +module_platform_driver(aspeed_i2c_bus_driver); + +MODULE_AUTHOR("Brendan Higgins "); +MODULE_DESCRIPTION("Aspeed I2C Bus Driver"); +MODULE_LICENSE("GPL v2"); -- 2.20.1