From f2e6cf76751d479874216f989f6bef6da6e80119 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 10 Oct 2014 09:12:47 -0700 Subject: [PATCH] pcmcia: Convert dev_printk to dev_ Reduce object size a little by using dev_ calls instead of dev_printk(KERN_. Other miscellanea: o Coalesce formats o Realign arguments o Use pr_cont instead of naked printk reorder test to use "%s\n" Signed-off-by: Joe Perches Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/cm4040_cs.c | 5 +- drivers/pcmcia/cistpl.c | 10 ++-- drivers/pcmcia/cs.c | 29 +++++------- drivers/pcmcia/ds.c | 39 +++++++--------- drivers/pcmcia/pcmcia_cis.c | 4 +- drivers/pcmcia/pcmcia_resource.c | 11 ++--- drivers/pcmcia/rsrc_nonstatic.c | 44 +++++++++--------- drivers/pcmcia/ti113x.h | 78 +++++++++++++++----------------- drivers/pcmcia/yenta_socket.c | 61 ++++++++++++------------- 9 files changed, 126 insertions(+), 155 deletions(-) diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 8dd48a2be911..fc061f7c2bd1 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -532,9 +532,8 @@ static int reader_config(struct pcmcia_device *link, int devno) fail_rc = pcmcia_enable_device(link); if (fail_rc != 0) { - dev_printk(KERN_INFO, &link->dev, - "pcmcia_enable_device failed 0x%x\n", - fail_rc); + dev_info(&link->dev, "pcmcia_enable_device failed 0x%x\n", + fail_rc); goto cs_release; } diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index facd151116b0..39ae542d9d23 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -94,8 +94,7 @@ static void __iomem *set_cis_map(struct pcmcia_socket *s, mem->res = pcmcia_find_mem_region(0, s->map_size, s->map_size, 0, s); if (mem->res == NULL) { - dev_printk(KERN_NOTICE, &s->dev, - "cs: unable to map card memory!\n"); + dev_notice(&s->dev, "cs: unable to map card memory!\n"); return NULL; } s->cis_virt = NULL; @@ -381,8 +380,7 @@ int verify_cis_cache(struct pcmcia_socket *s) buf = kmalloc(256, GFP_KERNEL); if (buf == NULL) { - dev_printk(KERN_WARNING, &s->dev, - "no memory for verifying CIS\n"); + dev_warn(&s->dev, "no memory for verifying CIS\n"); return -ENOMEM; } mutex_lock(&s->ops_mutex); @@ -414,14 +412,14 @@ int pcmcia_replace_cis(struct pcmcia_socket *s, const u8 *data, const size_t len) { if (len > CISTPL_MAX_CIS_SIZE) { - dev_printk(KERN_WARNING, &s->dev, "replacement CIS too big\n"); + dev_warn(&s->dev, "replacement CIS too big\n"); return -EINVAL; } mutex_lock(&s->ops_mutex); kfree(s->fake_cis); s->fake_cis = kmalloc(len, GFP_KERNEL); if (s->fake_cis == NULL) { - dev_printk(KERN_WARNING, &s->dev, "no memory to replace CIS\n"); + dev_warn(&s->dev, "no memory to replace CIS\n"); mutex_unlock(&s->ops_mutex); return -ENOMEM; } diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 5292db69c426..8007bfda720a 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -177,8 +177,8 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) wait_for_completion(&socket->thread_done); if (!socket->thread) { - dev_printk(KERN_WARNING, &socket->dev, - "PCMCIA: warning: socket thread did not start\n"); + dev_warn(&socket->dev, + "PCMCIA: warning: socket thread did not start\n"); return -EIO; } @@ -275,7 +275,7 @@ static int socket_reset(struct pcmcia_socket *skt) msleep(unreset_check * 10); } - dev_printk(KERN_ERR, &skt->dev, "time out after reset.\n"); + dev_err(&skt->dev, "time out after reset\n"); return -ETIMEDOUT; } @@ -325,8 +325,8 @@ static void socket_shutdown(struct pcmcia_socket *s) s->ops->get_status(s, &status); if (status & SS_POWERON) { - dev_printk(KERN_ERR, &s->dev, - "*** DANGER *** unable to remove socket power\n"); + dev_err(&s->dev, + "*** DANGER *** unable to remove socket power\n"); } s->state &= ~SOCKET_INUSE; @@ -356,15 +356,13 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay) } if (status & SS_PENDING) { - dev_printk(KERN_ERR, &skt->dev, - "voltage interrogation timed out.\n"); + dev_err(&skt->dev, "voltage interrogation timed out\n"); return -ETIMEDOUT; } if (status & SS_CARDBUS) { if (!(skt->features & SS_CAP_CARDBUS)) { - dev_printk(KERN_ERR, &skt->dev, - "cardbus cards are not supported.\n"); + dev_err(&skt->dev, "cardbus cards are not supported\n"); return -EINVAL; } skt->state |= SOCKET_CARDBUS; @@ -379,7 +377,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay) else if (!(status & SS_XVCARD)) skt->socket.Vcc = skt->socket.Vpp = 50; else { - dev_printk(KERN_ERR, &skt->dev, "unsupported voltage key.\n"); + dev_err(&skt->dev, "unsupported voltage key\n"); return -EIO; } @@ -396,7 +394,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay) skt->ops->get_status(skt, &status); if (!(status & SS_POWERON)) { - dev_printk(KERN_ERR, &skt->dev, "unable to apply power.\n"); + dev_err(&skt->dev, "unable to apply power\n"); return -EIO; } @@ -429,8 +427,7 @@ static int socket_insert(struct pcmcia_socket *skt) if (ret == 0) { skt->state |= SOCKET_PRESENT; - dev_printk(KERN_NOTICE, &skt->dev, - "pccard: %s card inserted into slot %d\n", + dev_notice(&skt->dev, "pccard: %s card inserted into slot %d\n", (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA", skt->sock); @@ -558,8 +555,7 @@ static int socket_resume(struct pcmcia_socket *skt) static void socket_remove(struct pcmcia_socket *skt) { - dev_printk(KERN_NOTICE, &skt->dev, - "pccard: card ejected from slot %d\n", skt->sock); + dev_notice(&skt->dev, "pccard: card ejected from slot %d\n", skt->sock); socket_shutdown(skt); } @@ -605,8 +601,7 @@ static int pccardd(void *__skt) /* register with the device core */ ret = device_register(&skt->dev); if (ret) { - dev_printk(KERN_WARNING, &skt->dev, - "PCMCIA: unable to register socket\n"); + dev_warn(&skt->dev, "PCMCIA: unable to register socket\n"); skt->thread = NULL; complete(&skt->thread_done); return 0; diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 9992bb5e0d4d..8ab419b631d3 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -284,8 +284,8 @@ static int pcmcia_device_probe(struct device *dev) dev_dbg(dev, "base %x, regs %x", p_dev->config_base, p_dev->config_regs); } else { - dev_printk(KERN_INFO, dev, - "pcmcia: could not parse base and rmask0 of CIS\n"); + dev_info(dev, + "pcmcia: could not parse base and rmask0 of CIS\n"); p_dev->config_base = 0; p_dev->config_regs = 0; } @@ -382,15 +382,15 @@ static int pcmcia_device_remove(struct device *dev) /* check for proper unloading */ if (p_dev->_irq || p_dev->_io || p_dev->_locked) - dev_printk(KERN_INFO, dev, - "pcmcia: driver %s did not release config properly\n", - p_drv->name); + dev_info(dev, + "pcmcia: driver %s did not release config properly\n", + p_drv->name); for (i = 0; i < MAX_WIN; i++) if (p_dev->_win & CLIENT_WIN_REQ(i)) - dev_printk(KERN_INFO, dev, - "pcmcia: driver %s did not release window properly\n", - p_drv->name); + dev_info(dev, + "pcmcia: driver %s did not release window properly\n", + p_drv->name); /* references from pcmcia_probe_device */ pcmcia_put_dev(p_dev); @@ -578,8 +578,7 @@ static struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, mutex_unlock(&s->ops_mutex); - dev_printk(KERN_NOTICE, &p_dev->dev, - "pcmcia: registering new device %s (IRQ: %d)\n", + dev_notice(&p_dev->dev, "pcmcia: registering new device %s (IRQ: %d)\n", p_dev->devname, p_dev->irq); pcmcia_device_query(p_dev); @@ -745,16 +744,14 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char *filename) if (request_firmware(&fw, filename, &dev->dev) == 0) { if (fw->size >= CISTPL_MAX_CIS_SIZE) { ret = -EINVAL; - dev_printk(KERN_ERR, &dev->dev, - "pcmcia: CIS override is too big\n"); + dev_err(&dev->dev, "pcmcia: CIS override is too big\n"); goto release; } if (!pcmcia_replace_cis(s, fw->data, fw->size)) ret = 0; else { - dev_printk(KERN_ERR, &dev->dev, - "pcmcia: CIS override failed\n"); + dev_err(&dev->dev, "pcmcia: CIS override failed\n"); goto release; } @@ -1149,10 +1146,9 @@ static int pcmcia_dev_suspend(struct device *dev, pm_message_t state) if (p_drv->suspend) { ret = p_drv->suspend(p_dev); if (ret) { - dev_printk(KERN_ERR, dev, - "pcmcia: device %s (driver %s) did " - "not want to go to sleep (%d)\n", - p_dev->devname, p_drv->name, ret); + dev_err(dev, + "pcmcia: device %s (driver %s) did not want to go to sleep (%d)\n", + p_dev->devname, p_drv->name, ret); mutex_lock(&p_dev->socket->ops_mutex); p_dev->suspended = 0; mutex_unlock(&p_dev->socket->ops_mutex); @@ -1343,14 +1339,13 @@ static int pcmcia_bus_add_socket(struct device *dev, socket = pcmcia_get_socket(socket); if (!socket) { - dev_printk(KERN_ERR, dev, - "PCMCIA obtaining reference to socket failed\n"); + dev_err(dev, "PCMCIA obtaining reference to socket failed\n"); return -ENODEV; } ret = sysfs_create_bin_file(&dev->kobj, &pccard_cis_attr); if (ret) { - dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n"); + dev_err(dev, "PCMCIA registration failed\n"); pcmcia_put_socket(socket); return ret; } @@ -1362,7 +1357,7 @@ static int pcmcia_bus_add_socket(struct device *dev, ret = pccard_register_pcmcia(socket, &pcmcia_bus_callback); if (ret) { - dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n"); + dev_err(dev, "PCMCIA registration failed\n"); pcmcia_put_socket(socket); return ret; } diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c index e2c92415b892..1c05d74e850d 100644 --- a/drivers/pcmcia/pcmcia_cis.c +++ b/drivers/pcmcia/pcmcia_cis.c @@ -44,7 +44,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, buf = kmalloc(256, GFP_KERNEL); if (buf == NULL) { - dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n"); + dev_warn(&s->dev, "no memory to read tuple\n"); return -ENOMEM; } tuple.DesiredTuple = code; @@ -94,7 +94,7 @@ int pccard_loop_tuple(struct pcmcia_socket *s, unsigned int function, buf = kzalloc(256, GFP_KERNEL); if (buf == NULL) { - dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n"); + dev_warn(&s->dev, "no memory to read tuple\n"); return -ENOMEM; } diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index e8c19def1b0f..34aad895a239 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -508,8 +508,7 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev) s->socket.Vpp = p_dev->vpp; if (s->ops->set_socket(s, &s->socket)) { mutex_unlock(&s->ops_mutex); - dev_printk(KERN_WARNING, &p_dev->dev, - "Unable to set socket state\n"); + dev_warn(&p_dev->dev, "Unable to set socket state\n"); return -EINVAL; } @@ -736,13 +735,11 @@ __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, ret = request_irq(p_dev->irq, handler, 0, p_dev->devname, p_dev->priv); if (ret) { ret = pcmcia_request_irq(p_dev, handler); - dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: " - "request for exclusive IRQ could not be fulfilled.\n"); - dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver " - "needs updating to supported shared IRQ lines.\n"); + dev_warn(&p_dev->dev, "pcmcia: request for exclusive IRQ could not be fulfilled\n"); + dev_warn(&p_dev->dev, "pcmcia: the driver needs updating to supported shared IRQ lines\n"); } if (ret) - dev_printk(KERN_INFO, &p_dev->dev, "request_irq() failed\n"); + dev_info(&p_dev->dev, "request_irq() failed\n"); else p_dev->_irq = 1; diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 065704c605d5..5ef7b46a2578 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -191,15 +191,13 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base, int any; u_char *b, hole, most; - dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:", - base, base+num-1); + dev_info(&s->dev, "cs: IO port probe %#x-%#x:", base, base+num-1); /* First, what does a floating port look like? */ b = kzalloc(256, GFP_KERNEL); if (!b) { - printk("\n"); - dev_printk(KERN_ERR, &s->dev, - "do_io_probe: unable to kmalloc 256 bytes"); + pr_cont("\n"); + dev_err(&s->dev, "do_io_probe: unable to kmalloc 256 bytes\n"); return; } for (i = base, most = 0; i < base+num; i += 8) { @@ -223,7 +221,7 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base, res = claim_region(s, i, 8, IORESOURCE_IO, "PCMCIA ioprobe"); if (!res) { if (!any) - printk(" excluding"); + pr_cont(" excluding"); if (!bad) bad = any = i; continue; @@ -234,13 +232,13 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base, free_region(res); if (j < 8) { if (!any) - printk(" excluding"); + pr_cont(" excluding"); if (!bad) bad = any = i; } else { if (bad) { sub_interval(&s_data->io_db, bad, i-bad); - printk(" %#x-%#x", bad, i-1); + pr_cont(" %#x-%#x", bad, i-1); bad = 0; } } @@ -248,15 +246,15 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base, if (bad) { if ((num > 16) && (bad == base) && (i == base+num)) { sub_interval(&s_data->io_db, bad, i-bad); - printk(" nothing: probe failed.\n"); + pr_cont(" nothing: probe failed.\n"); return; } else { sub_interval(&s_data->io_db, bad, i-bad); - printk(" %#x-%#x", bad, i-1); + pr_cont(" %#x-%#x", bad, i-1); } } - printk(any ? "\n" : " clean.\n"); + pr_cont("%s\n", !any ? " clean" : ""); } #endif @@ -413,8 +411,8 @@ static int do_mem_probe(struct pcmcia_socket *s, u_long base, u_long num, struct socket_data *s_data = s->resource_data; u_long i, j, bad, fail, step; - dev_printk(KERN_INFO, &s->dev, "cs: memory probe 0x%06lx-0x%06lx:", - base, base+num-1); + dev_info(&s->dev, "cs: memory probe 0x%06lx-0x%06lx:", + base, base+num-1); bad = fail = 0; step = (num < 0x20000) ? 0x2000 : ((num>>4) & ~0x1fff); /* don't allow too large steps */ @@ -438,13 +436,13 @@ static int do_mem_probe(struct pcmcia_socket *s, u_long base, u_long num, } if (i != j) { if (!bad) - printk(" excluding"); - printk(" %#05lx-%#05lx", i, j-1); + pr_cont(" excluding"); + pr_cont(" %#05lx-%#05lx", i, j-1); sub_interval(&s_data->mem_db, i, j-i); bad += j-i; } } - printk(bad ? "\n" : " clean.\n"); + pr_cont("%s\n", !bad ? " clean" : ""); return num - bad; } @@ -495,7 +493,7 @@ static int validate_mem(struct pcmcia_socket *s, unsigned int probe_mask) return 0; if (s_data->mem_db_valid.next != &s_data->mem_db_valid) return 0; - dev_printk(KERN_NOTICE, &s->dev, + dev_notice(&s->dev, "cs: warning: no high memory space available!\n"); return -ENODEV; } @@ -975,9 +973,9 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s) if (res == &ioport_resource) continue; - dev_printk(KERN_INFO, &s->cb_dev->dev, - "pcmcia: parent PCI bridge window: %pR\n", - res); + dev_info(&s->cb_dev->dev, + "pcmcia: parent PCI bridge window: %pR\n", + res); if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end)) done |= IORESOURCE_IO; @@ -990,9 +988,9 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s) if (res == &iomem_resource) continue; - dev_printk(KERN_INFO, &s->cb_dev->dev, - "pcmcia: parent PCI bridge window: %pR\n", - res); + dev_info(&s->cb_dev->dev, + "pcmcia: parent PCI bridge window: %pR\n", + res); if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end)) done |= IORESOURCE_MEM; } diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index a71789486cdf..5cb670e037a0 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -372,8 +372,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC); devctl = config_readb(socket, TI113X_DEVICE_CONTROL); - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl); + dev_info(&socket->dev->dev, "TI: mfunc 0x%08x, devctl 0x%02x\n", + mfunc, devctl); /* make sure PCI interrupts are enabled before probing */ ti_init(socket); @@ -387,8 +387,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) * We're here which means PCI interrupts are _not_ delivered. try to * find the right setting (all serial or parallel) */ - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: probing PCI interrupt failed, trying to fix\n"); + dev_info(&socket->dev->dev, + "TI: probing PCI interrupt failed, trying to fix\n"); /* for serial PCI make sure MFUNC3 is set to IRQSER */ if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) { @@ -412,8 +412,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: all-serial interrupts ok\n"); + dev_info(&socket->dev->dev, + "TI: all-serial interrupts ok\n"); mfunc_old = mfunc; goto out; } @@ -428,8 +428,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) } /* serial PCI interrupts not working fall back to parallel */ - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: falling back to parallel PCI interrupts\n"); + dev_info(&socket->dev->dev, + "TI: falling back to parallel PCI interrupts\n"); devctl &= ~TI113X_DCR_IMODE_MASK; devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */ config_writeb(socket, TI113X_DEVICE_CONTROL, devctl); @@ -460,8 +460,7 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { mfunc_old = mfunc; - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: parallel PCI interrupts ok\n"); + dev_info(&socket->dev->dev, "TI: parallel PCI interrupts ok\n"); } else { /* not working, back to old value */ mfunc = mfunc_old; @@ -473,9 +472,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket) out: if (pci_irq_status < 1) { socket->cb_irq = 0; - dev_printk(KERN_INFO, &socket->dev->dev, - "Yenta TI: no PCI interrupts. Fish. " - "Please report.\n"); + dev_info(&socket->dev->dev, + "Yenta TI: no PCI interrupts. Fish. Please report.\n"); } } @@ -547,9 +545,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC); devctl = config_readb(socket, TI113X_DEVICE_CONTROL); - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: mfunc 0x%08x, devctl 0x%02x\n", - mfunc, devctl); + dev_info(&socket->dev->dev, "TI: mfunc 0x%08x, devctl 0x%02x\n", + mfunc, devctl); /* if IRQs are configured as tied, align irq of func1 with func0 */ sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL); @@ -568,8 +565,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) * We're here which means PCI interrupts are _not_ delivered. try to * find the right setting */ - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: probing PCI interrupt failed, trying to fix\n"); + dev_info(&socket->dev->dev, + "TI: probing PCI interrupt failed, trying to fix\n"); /* if all serial: set INTRTIE, probe again */ if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) { @@ -578,8 +575,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) if (ti12xx_tie_interrupts(socket, &old_irq)) { pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: all-serial interrupts, tied ok\n"); + dev_info(&socket->dev->dev, + "TI: all-serial interrupts, tied ok\n"); goto out; } @@ -616,8 +613,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: parallel PCI interrupts ok\n"); + dev_info(&socket->dev->dev, + "TI: parallel PCI interrupts ok\n"); goto out; } @@ -632,8 +629,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) if (ti12xx_tie_interrupts(socket, &old_irq)) { pci_irq_status = yenta_probe_cb_irq(socket); if (pci_irq_status == 1) { - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: parallel PCI interrupts, tied ok\n"); + dev_info(&socket->dev->dev, + "TI: parallel PCI interrupts, tied ok\n"); goto out; } @@ -644,8 +641,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket) out: if (pci_irq_status < 1) { socket->cb_irq = 0; - dev_printk(KERN_INFO, &socket->dev->dev, - "TI: no PCI interrupts. Fish. Please report.\n"); + dev_info(&socket->dev->dev, + "TI: no PCI interrupts. Fish. Please report.\n"); } } @@ -849,13 +846,12 @@ static int ti12xx_override(struct yenta_socket *socket) /* make sure that memory burst is active */ val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL); if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) { - dev_printk(KERN_INFO, &socket->dev->dev, - "Disabling CLKRUN feature\n"); + dev_info(&socket->dev->dev, "Disabling CLKRUN feature\n"); val |= TI113X_SCR_KEEPCLK; } if (!(val & TI122X_SCR_MRBURSTUP)) { - dev_printk(KERN_INFO, &socket->dev->dev, - "Enabling burst memory read transactions\n"); + dev_info(&socket->dev->dev, + "Enabling burst memory read transactions\n"); val |= TI122X_SCR_MRBURSTUP; } if (val_orig != val) @@ -866,12 +862,10 @@ static int ti12xx_override(struct yenta_socket *socket) * CSC interrupts to PCI rather than INTVAL. */ val = config_readb(socket, TI1250_DIAGNOSTIC); - dev_printk(KERN_INFO, &socket->dev->dev, - "Using %s to route CSC interrupts to PCI\n", - (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL"); - dev_printk(KERN_INFO, &socket->dev->dev, - "Routing CardBus interrupts to %s\n", - (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA"); + dev_info(&socket->dev->dev, "Using %s to route CSC interrupts to PCI\n", + (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL"); + dev_info(&socket->dev->dev, "Routing CardBus interrupts to %s\n", + (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA"); /* do irqrouting, depending on function */ if (PCI_FUNC(socket->dev->devfn) == 0) @@ -896,9 +890,9 @@ static int ti1250_override(struct yenta_socket *socket) diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ; if (diag != old) { - dev_printk(KERN_INFO, &socket->dev->dev, - "adjusting diagnostic: %02x -> %02x\n", - old, diag); + dev_info(&socket->dev->dev, + "adjusting diagnostic: %02x -> %02x\n", + old, diag); config_writeb(socket, TI1250_DIAGNOSTIC, diag); } @@ -963,9 +957,9 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus) /* default to clear TLTEnable bit, old behaviour */ test_c9 &= ~ENE_TEST_C9_TLTENABLE; - dev_printk(KERN_INFO, &socket->dev->dev, - "EnE: chaning testregister 0xC9, %02x -> %02x\n", - old_c9, test_c9); + dev_info(&socket->dev->dev, + "EnE: changing testregister 0xC9, %02x -> %02x\n", + old_c9, test_c9); config_writeb(socket, ENE_TEST_C9, test_c9); } diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 965bd8491233..56c83437271c 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -712,10 +712,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type pcibios_bus_to_resource(dev->bus, res, ®ion); if (pci_claim_resource(dev, PCI_BRIDGE_RESOURCES + nr) == 0) return 0; - dev_printk(KERN_INFO, &dev->dev, - "Preassigned resource %d busy or not available, " - "reconfiguring...\n", - nr); + dev_info(&dev->dev, + "Preassigned resource %d busy or not available, reconfiguring...\n", + nr); } if (type & IORESOURCE_IO) { @@ -738,9 +737,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type return 1; } - dev_printk(KERN_INFO, &dev->dev, - "no resource of type %x available, trying to continue...\n", - type); + dev_info(&dev->dev, + "no resource of type %x available, trying to continue...\n", + type); res->start = res->end = res->flags = 0; return 0; } @@ -979,8 +978,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket) socket->probe_status = 0; if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) { - dev_printk(KERN_WARNING, &socket->dev->dev, - "request_irq() in yenta_probe_cb_irq() failed!\n"); + dev_warn(&socket->dev->dev, + "request_irq() in yenta_probe_cb_irq() failed!\n"); return -1; } @@ -1019,9 +1018,8 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i else socket->socket.irq_mask = 0; - dev_printk(KERN_INFO, &socket->dev->dev, - "ISA IRQ mask 0x%04x, PCI irq %d\n", - socket->socket.irq_mask, socket->cb_irq); + dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n", + socket->socket.irq_mask, socket->cb_irq); } /* @@ -1111,9 +1109,9 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) /* Show that the wanted subordinate number is not possible: */ if (cardbus_bridge->busn_res.end > upper_limit) - dev_printk(KERN_WARNING, &cardbus_bridge->dev, - "Upper limit for fixing this " - "bridge's parent bridge: #%02x\n", upper_limit); + dev_warn(&cardbus_bridge->dev, + "Upper limit for fixing this bridge's parent bridge: #%02x\n", + upper_limit); /* If we have room to increase the bridge's subordinate number, */ if (bridge_to_fix->busn_res.end < upper_limit) { @@ -1122,11 +1120,11 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) unsigned char subordinate_to_assign = min_t(int, cardbus_bridge->busn_res.end, upper_limit); - dev_printk(KERN_INFO, &bridge_to_fix->dev, - "Raising subordinate bus# of parent " - "bus (#%02x) from #%02x to #%02x\n", - bridge_to_fix->number, - (int)bridge_to_fix->busn_res.end, subordinate_to_assign); + dev_info(&bridge_to_fix->dev, + "Raising subordinate bus# of parent bus (#%02x) from #%02x to #%02x\n", + bridge_to_fix->number, + (int)bridge_to_fix->busn_res.end, + subordinate_to_assign); /* Save the new subordinate in the bus struct of the bridge */ bridge_to_fix->busn_res.end = subordinate_to_assign; @@ -1153,8 +1151,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id) * Bail out if so. */ if (!dev->subordinate) { - dev_printk(KERN_ERR, &dev->dev, "no bus associated! " - "(try 'pci=assign-busses')\n"); + dev_err(&dev->dev, "no bus associated! (try 'pci=assign-busses')\n"); return -ENODEV; } @@ -1189,7 +1186,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id) goto disable; if (!pci_resource_start(dev, 0)) { - dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n"); + dev_err(&dev->dev, "No cardbus resource!\n"); ret = -ENODEV; goto release; } @@ -1208,8 +1205,8 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id) * report the subsystem vendor and device for help debugging * the irq stuff... */ - dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n", - dev->subsystem_vendor, dev->subsystem_device); + dev_info(&dev->dev, "CardBus bridge found [%04x:%04x]\n", + dev->subsystem_vendor, dev->subsystem_device); yenta_config_init(socket); @@ -1239,12 +1236,10 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id) setup_timer(&socket->poll_timer, yenta_interrupt_wrapper, (unsigned long)socket); mod_timer(&socket->poll_timer, jiffies + HZ); - dev_printk(KERN_INFO, &dev->dev, - "no PCI IRQ, CardBus support disabled for this " - "socket.\n"); - dev_printk(KERN_INFO, &dev->dev, - "check your BIOS CardBus, BIOS IRQ or ACPI " - "settings.\n"); + dev_info(&dev->dev, + "no PCI IRQ, CardBus support disabled for this socket.\n"); + dev_info(&dev->dev, + "check your BIOS CardBus, BIOS IRQ or ACPI settings.\n"); } else { socket->socket.features |= SS_CAP_CARDBUS; } @@ -1252,8 +1247,8 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Figure out what the dang thing can do for the PCMCIA layer... */ yenta_interrogate(socket); yenta_get_socket_capabilities(socket, isa_interrupts); - dev_printk(KERN_INFO, &dev->dev, - "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE)); + dev_info(&dev->dev, "Socket status: %08x\n", + cb_readl(socket, CB_SOCKET_STATE)); yenta_fixup_parent_bridge(dev->subordinate); -- 2.20.1