From f19ed8e0eeed7b7883e359a758d01eb723d0c698 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 6 Nov 2014 13:01:47 +0100 Subject: [PATCH] ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. G Add support for the new hardware revision of the IGEP COM MODULE. Basically, the new revision G replaces the old Wifi module for a Wilink8 based module. Signed-off-by: Enric Balletbo i Serra Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 67 ++++++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 arch/arm/boot/dts/omap3-igep0030-rev-g.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..454feb61217e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -303,6 +303,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-ha-lcd.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ + omap3-igep0030-rev-g.dtb \ omap3-ldp.dtb \ omap3-lilly-dbb056.dtb \ omap3-n900.dtb \ diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts new file mode 100644 index 000000000000..9326b282c94a --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -0,0 +1,67 @@ +/* + * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) + * + * Copyright (C) 2014 Javier Martinez Canillas + * Copyright (C) 2014 Enric Balletbo i Serra + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-igep0030-common.dtsi" + +/ { + model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3"; + + /* Regulator to trigger the WL_EN signal of the Wifi module */ + lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { + compatible = "regulator-fixed"; + regulator-name = "regulator-lbep5clwmc-wlen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */ + enable-active-high; + }; +}; + +&omap3_pmx_core { + lbep5clwmc_pins: pinmux_lbep5clwmc_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */ + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */ + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */ + >; + }; + +}; + +&i2c2 { + status = "disabled"; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins &leds_core2_pins>; + + boot { + label = "omap3:green:boot"; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>; + vmmc-supply = <&lbep5clwmc_wlen>; + bus-width = <4>; + non-removable; +}; -- 2.20.1