From f0fcd7a967d3904021caa1574c962ab1b6426e14 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Tue, 9 Apr 2013 08:48:01 +0000 Subject: [PATCH] tg3: Fix flow control settings not propagated to hardware In tg3_setup_copper_phy(), if autonegotiation is disabled, we need to relink only if the speed or duplex does not match the configured setting. If flow control does not match, a relink is not necessary as flow control is not a PHY setting. Later on, we'll call tg3_setup_flow_ctrl() to set up the MAC to the desired flow control settings if we're in full duplex mode. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a4416b09f209..d044adf2718b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -4587,9 +4587,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset) } else { if (!(bmcr & BMCR_ANENABLE) && tp->link_config.speed == current_speed && - tp->link_config.duplex == current_duplex && - tp->link_config.flowctrl == - tp->link_config.active_flowctrl) { + tp->link_config.duplex == current_duplex) { current_link_up = 1; } } -- 2.20.1