From efeddce7ea7c75a53b3084d71db15657a00e94dc Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Mon, 17 Feb 2014 12:53:17 +0200 Subject: [PATCH] gianfar: Factor out enabling/disabling of hw interrupts Throughout the code there are places where the controller's hw interrupt sources need to get disabled/enabled (masked/ un-masked) all at once. The recommendation for disabling the interrupts is to clear the ievent first then the imask register (not the other way around). Use the gfar_ints_enable/disable() helpers to make these operations consistent. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 60 ++++++++++++------------ 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 987f3234d23b..385de8064371 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -448,6 +448,29 @@ static const struct net_device_ops gfar_netdev_ops = { #endif }; +static void gfar_ints_disable(struct gfar_private *priv) +{ + int i; + for (i = 0; i < priv->num_grps; i++) { + struct gfar __iomem *regs = priv->gfargrp[i].regs; + /* Clear IEVENT */ + gfar_write(®s->ievent, IEVENT_INIT_CLEAR); + + /* Initialize IMASK */ + gfar_write(®s->imask, IMASK_INIT_CLEAR); + } +} + +static void gfar_ints_enable(struct gfar_private *priv) +{ + int i; + for (i = 0; i < priv->num_grps; i++) { + struct gfar __iomem *regs = priv->gfargrp[i].regs; + /* Unmask the interrupts we look for */ + gfar_write(®s->imask, IMASK_DEFAULT); + } +} + void lock_rx_qs(struct gfar_private *priv) { int i; @@ -1548,19 +1571,10 @@ static void gfar_configure_serdes(struct net_device *dev) static void init_registers(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - struct gfar __iomem *regs = NULL; - int i; - - for (i = 0; i < priv->num_grps; i++) { - regs = priv->gfargrp[i].regs; - /* Clear IEVENT */ - gfar_write(®s->ievent, IEVENT_INIT_CLEAR); + struct gfar __iomem *regs = priv->gfargrp[0].regs; - /* Initialize IMASK */ - gfar_write(®s->imask, IMASK_INIT_CLEAR); - } + gfar_ints_disable(priv); - regs = priv->gfargrp[0].regs; /* Init hash registers to zero */ gfar_write(®s->igaddr0, 0); gfar_write(®s->igaddr1, 0); @@ -1622,20 +1636,11 @@ static int __gfar_is_rx_idle(struct gfar_private *priv) static void gfar_halt_nodisable(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - struct gfar __iomem *regs = NULL; + struct gfar __iomem *regs = priv->gfargrp[0].regs; u32 tempval; - int i; - - for (i = 0; i < priv->num_grps; i++) { - regs = priv->gfargrp[i].regs; - /* Mask all interrupts */ - gfar_write(®s->imask, IMASK_INIT_CLEAR); - /* Clear all interrupts */ - gfar_write(®s->ievent, IEVENT_INIT_CLEAR); - } + gfar_ints_disable(priv); - regs = priv->gfargrp[0].regs; /* Stop the DMA, and wait for it to stop */ tempval = gfar_read(®s->dmactrl); if ((tempval & (DMACTRL_GRS | DMACTRL_GTS)) != @@ -1823,10 +1828,10 @@ void gfar_start(struct net_device *dev) /* Clear THLT/RHLT, so that the DMA starts polling now */ gfar_write(®s->tstat, priv->gfargrp[i].tstat); gfar_write(®s->rstat, priv->gfargrp[i].rstat); - /* Unmask the interrupts we look for */ - gfar_write(®s->imask, IMASK_DEFAULT); } + gfar_ints_enable(priv); + dev->trans_start = jiffies; /* prevent tx timeout */ } @@ -1931,15 +1936,10 @@ err_irq_fail: int startup_gfar(struct net_device *ndev) { struct gfar_private *priv = netdev_priv(ndev); - struct gfar __iomem *regs = NULL; int err, i, j; - for (i = 0; i < priv->num_grps; i++) { - regs= priv->gfargrp[i].regs; - gfar_write(®s->imask, IMASK_INIT_CLEAR); - } + gfar_ints_disable(priv); - regs= priv->gfargrp[0].regs; err = gfar_alloc_skb_resources(ndev); if (err) return err; -- 2.20.1