From efb0e487b0d34133b020da379faa9b02b56376e7 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 17 Jul 2017 22:25:00 +0200 Subject: [PATCH] ARM: dts: imx6: RDU2: Add Micrel PHY to FEC The FEC has a Micrel PHY connected to it. This PHY is managed using the bit-banging MDIO bus. Add this to the device tree. Signed-off-by: Andrew Lunn Tested-by: Chris Healy Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 5d94b5ee6aa0..d7328e9166e9 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -59,6 +59,10 @@ pinctrl-0 = <&pinctrl_mdio1>; gpios = <&gpio6 5 GPIO_ACTIVE_HIGH &gpio6 4 GPIO_ACTIVE_HIGH>; + + phy: ethernet-phy@0 { + reg = <0>; + }; }; reg_28p0v: regulator-28p0v { @@ -615,15 +619,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; + phy-handle = <&phy>; phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; phy-supply = <®_3p3v>; status = "okay"; - - fixed-link { - speed = <100>; - full-duplex; - }; }; &usbh1 { -- 2.20.1