From ef76856d26087f897e163b9fd8b2f7bd0cd54fc7 Mon Sep 17 00:00:00 2001 From: Yeasah Pell Date: Tue, 26 Sep 2006 12:30:14 -0300 Subject: [PATCH] V4L/DVB (4479): LNB voltage control was inverted for the benefit of geniatech cards on Kworld 1) It sets LNBDCPol differently based on the card type. Now it should work properly for both the kworld and geniatech cards. 2) It stops returning an error for the SEC_VOLTAGE_OFF voltage command (the cx88-dvb level handles the actual voltage on/off, but it still passes the ioctl down to the cx24123 level, which previously rejected the OFF as invalid so the ioctl would report failure) Acked-by: Manu Abraham Signed-off-by: Yeasah Pell Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/cx24123.c | 7 +++++++ drivers/media/dvb/frontends/cx24123.h | 3 +++ drivers/media/video/cx88/cx88-dvb.c | 1 + 3 files changed, 11 insertions(+) diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c index f77b2d59955c..62d69a6ea699 100644 --- a/drivers/media/dvb/frontends/cx24123.c +++ b/drivers/media/dvb/frontends/cx24123.c @@ -661,6 +661,10 @@ static int cx24123_initfe(struct dvb_frontend* fe) for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++) cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data); + /* Set the LNB polarity */ + if(state->config->lnb_polarity) + cx24123_writereg(state, 0x32, cx24123_readreg(state, 0x32) | 0x02); + return 0; } @@ -678,6 +682,9 @@ static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage case SEC_VOLTAGE_18: dprintk("%s: setting voltage 18V\n", __FUNCTION__); return cx24123_writereg(state, 0x29, val | 0x80); + case SEC_VOLTAGE_OFF: + /* already handled in cx88-dvb */ + return 0; default: return -EINVAL; }; diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h index 6a8cb4c41adf..57a1dae1dc40 100644 --- a/drivers/media/dvb/frontends/cx24123.h +++ b/drivers/media/dvb/frontends/cx24123.h @@ -30,6 +30,9 @@ struct cx24123_config /* Need to set device param for start_dma */ int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); + + /* 0 = LNB voltage normal, 1 = LNB voltage inverted */ + int lnb_polarity; }; #if defined(CONFIG_DVB_CX24123) || defined(CONFIG_DVB_CX24123_MODULE) diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index ebbf54077132..0771acbed74d 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -498,6 +498,7 @@ static struct cx24123_config hauppauge_novas_config = { static struct cx24123_config kworld_dvbs_100_config = { .demod_address = 0x15, .set_ts_params = cx24123_set_ts_param, + .lnb_polarity = 1, }; static int dvb_register(struct cx8802_dev *dev) -- 2.20.1