From eee44da0453cfe9125f4297e4244fe1d6fb1c653 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 7 Mar 2013 18:51:46 +0530 Subject: [PATCH] usb: musb: omap2430: replace *_* with *-* in property names No functional change. Replace *_* with *-* in property names of otg to follow the general convention. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/omap-usb.txt | 12 ++++++------ drivers/usb/musb/omap2430.c | 6 +++--- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 1b9f55fd96c0..662f0f1d2315 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -8,10 +8,10 @@ OMAP MUSB GLUE and disconnect. - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. - - num_eps : Specifies the number of endpoints. This is also a + - num-eps : Specifies the number of endpoints. This is also a MUSB configuration-specific setting. Should be set to "16" - - ram_bits : Specifies the ram address size. Should be set to "12" - - interface_type : This is a board specific setting to describe the type of + - ram-bits : Specifies the ram address size. Should be set to "12" + - interface-type : This is a board specific setting to describe the type of interface between the controller and the phy. It should be "0" or "1" specifying ULPI and UTMI respectively. - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" @@ -29,14 +29,14 @@ usb_otg_hs: usb_otg_hs@4a0ab000 { ti,hwmods = "usb_otg_hs"; ti,has-mailbox; multipoint = <1>; - num_eps = <16>; - ram_bits = <12>; + num-eps = <16>; + ram-bits = <12>; ctrl-module = <&omap_control_usb>; }; Board specific device node entry &usb_otg_hs { - interface_type = <1>; + interface-type = <1>; mode = <3>; power = <50>; }; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 8ba9bb2a91a7..e7b5eae5a141 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -526,10 +526,10 @@ static int omap2430_probe(struct platform_device *pdev) } of_property_read_u32(np, "mode", (u32 *)&pdata->mode); - of_property_read_u32(np, "interface_type", + of_property_read_u32(np, "interface-type", (u32 *)&data->interface_type); - of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps); - of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits); + of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); pdata->has_mailbox = of_property_read_bool(np, -- 2.20.1