From ee999fb3f17faa3af6028bf7130707fe0d4157a4 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Tue, 25 Jun 2013 16:08:10 +0200 Subject: [PATCH] mfd: max8998: Add support for Device Tree This patch adds Device Tree support to max8998 driver. Signed-off-by: Tomasz Figa Acked-by: Mark Brown Signed-off-by: Samuel Ortiz --- .../devicetree/bindings/mfd/max8998.txt | 119 ++++++++++++++++ drivers/mfd/max8998.c | 67 ++++++++- drivers/regulator/max8998.c | 131 +++++++++++++++++- drivers/rtc/rtc-max8998.c | 2 +- include/linux/mfd/max8998-private.h | 2 + include/linux/mfd/max8998.h | 2 + 6 files changed, 316 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/max8998.txt diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt new file mode 100644 index 000000000000..23a3650ff2a2 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max8998.txt @@ -0,0 +1,119 @@ +* Maxim MAX8998, National/TI LP3974 multi-function device + +The Maxim MAX8998 is a multi-function device which includes voltage/current +regulators, real time clock, battery charging controller and several +other sub-blocks. It is interfaced using an I2C interface. Each sub-block +is addressed by the host system using different i2c slave address. + +PMIC sub-block +-------------- + +The PMIC sub-block contains a number of voltage and current regulators, +with controllable parameters and dynamic voltage scaling capability. +In addition, it includes a real time clock and battery charging controller +as well. It is accessible at I2C address 0x66. + +Required properties: +- compatible: Should be one of the following: + - "maxim,max8998" for Maxim MAX8998 + - "national,lp3974" or "ti,lp3974" for National/TI LP3974. +- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. + +Optional properties: +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from MAX8998 are routed to. +- interrupts: Interrupt specifiers for two interrupt sources. + - First interrupt specifier is for main interrupt. + - Second interrupt specifier is for power-on/-off interrupt. +- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used + for buck 1 dvs. The format of the gpio specifier depends on the gpio + controller. +- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used + for buck 2 dvs. The format of the gpio specifier depends on the gpio + controller. +- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from + the possible 4 options selectable by the dvs gpios. The value of this + property should be 0, 1, 2 or 3. If not specified or out of range, + a default value of 0 is taken. +- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from + the possible 2 options selectable by the dvs gpios. The value of this + property should be 0 or 1. If not specified or out of range, a default + value of 0 is taken. +- max8998,pmic-buck-voltage-lock: If present, disallows changing of + preprogrammed buck dvfs voltages. + +Additional properties required if max8998,pmic-buck1-dvs-gpios is defined: +- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts + for buck1 regulator that can be selected using dvs gpio. + +Additional properties required if max8998,pmic-buck2-dvs-gpio is defined: +- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts + for buck2 regulator that can be selected using dvs gpio. + +Regulators: All the regulators of MAX8998 to be instantiated shall be +listed in a child node named 'regulators'. Each regulator is represented +by a child node of the 'regulators' node. + + regulator-name { + /* standard regulator bindings here */ + }; + +Following regulators of the MAX8998 PMIC block are supported. Note that +the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or BUCK +number as described in MAX8998 datasheet. + + - LDOn + - valid values for n are 2 to 17 + - Example: LDO2, LDO10, LDO17 + - BUCKn + - valid values for n are 1 to 4. + - Example: BUCK1, BUCK2, BUCK3, BUCK4 + + - ENVICHG: Battery Charging Current Monitor Output. This is a fixed + voltage type regulator + + - ESAFEOUT1: (ldo19) + - ESAFEOUT2: (ld020) + +Standard regulator bindings are used inside regulator subnodes. Check + Documentation/devicetree/bindings/regulator/regulator.txt +for more details. + +Example: + + pmic@66 { + compatible = "maxim,max8998-pmic"; + reg = <0x66>; + interrupt-parent = <&wakeup_eint>; + interrupts = <4 0>, <3 0>; + + /* Buck 1 DVS settings */ + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ + <&gpx0 1 1 0 0>; /* SET2 */ + max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1000000>, <950000>; + + /* Buck 2 DVS settings */ + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */ + max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>; + + /* Regulators to instantiate */ + regulators { + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index d7218cc90945..21af51a499f4 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -20,12 +20,15 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include #include #include #include +#include +#include #include #include #include @@ -128,6 +131,56 @@ int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask) } EXPORT_SYMBOL(max8998_update_reg); +#ifdef CONFIG_OF +static struct of_device_id max8998_dt_match[] = { + { .compatible = "maxim,max8998", .data = (void *)TYPE_MAX8998 }, + { .compatible = "national,lp3974", .data = (void *)TYPE_LP3974 }, + { .compatible = "ti,lp3974", .data = (void *)TYPE_LP3974 }, + {}, +}; +MODULE_DEVICE_TABLE(of, max8998_dt_match); +#endif + +/* + * Only the common platform data elements for max8998 are parsed here from the + * device tree. Other sub-modules of max8998 such as pmic, rtc and others have + * to parse their own platform data elements from device tree. + * + * The max8998 platform data structure is instantiated here and the drivers for + * the sub-modules need not instantiate another instance while parsing their + * platform data. + */ +static struct max8998_platform_data *max8998_i2c_parse_dt_pdata( + struct device *dev) +{ + struct max8998_platform_data *pd; + + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return ERR_PTR(-ENOMEM); + + pd->ono = irq_of_parse_and_map(dev->of_node, 1); + + /* + * ToDo: the 'wakeup' member in the platform data is more of a linux + * specfic information. Hence, there is no binding for that yet and + * not parsed here. + */ + return pd; +} + +static inline int max8998_i2c_get_driver_data(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(max8998_dt_match, i2c->dev.of_node); + return (int)match->data; + } + + return (int)id->driver_data; +} + static int max8998_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -139,11 +192,20 @@ static int max8998_i2c_probe(struct i2c_client *i2c, if (max8998 == NULL) return -ENOMEM; + if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node) { + pdata = max8998_i2c_parse_dt_pdata(&i2c->dev); + if (IS_ERR(pdata)) { + ret = PTR_ERR(pdata); + goto err; + } + } + i2c_set_clientdata(i2c, max8998); max8998->dev = &i2c->dev; max8998->i2c = i2c; max8998->irq = i2c->irq; - max8998->type = id->driver_data; + max8998->type = max8998_i2c_get_driver_data(i2c, id); + max8998->pdata = pdata; if (pdata) { max8998->ono = pdata->ono; max8998->irq_base = pdata->irq_base; @@ -158,7 +220,7 @@ static int max8998_i2c_probe(struct i2c_client *i2c, pm_runtime_set_active(max8998->dev); - switch (id->driver_data) { + switch (max8998->type) { case TYPE_LP3974: ret = mfd_add_devices(max8998->dev, -1, lp3974_devs, ARRAY_SIZE(lp3974_devs), @@ -314,6 +376,7 @@ static struct i2c_driver max8998_i2c_driver = { .name = "max8998", .owner = THIS_MODULE, .pm = &max8998_pm, + .of_match_table = of_match_ptr(max8998_dt_match), }, .probe = max8998_i2c_probe, .remove = max8998_i2c_remove, diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index 8c45b93b7334..a4c53b2d1aaf 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -28,8 +28,11 @@ #include #include #include +#include +#include #include #include +#include #include #include @@ -589,13 +592,13 @@ static struct regulator_desc regulators[] = { .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, { - .name = "EN32KHz AP", + .name = "EN32KHz-AP", .id = MAX8998_EN32KHZ_AP, .ops = &max8998_others_ops, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, { - .name = "EN32KHz CP", + .name = "EN32KHz-CP", .id = MAX8998_EN32KHZ_CP, .ops = &max8998_others_ops, .type = REGULATOR_VOLTAGE, @@ -621,10 +624,122 @@ static struct regulator_desc regulators[] = { } }; +static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev, + struct max8998_platform_data *pdata, + struct device_node *pmic_np) +{ + int gpio; + + gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 0); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid buck1 gpio[0]: %d\n", gpio); + return -EINVAL; + } + pdata->buck1_set1 = gpio; + + gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 1); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid buck1 gpio[1]: %d\n", gpio); + return -EINVAL; + } + pdata->buck1_set2 = gpio; + + gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck2-dvs-gpio", 0); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid buck 2 gpio: %d\n", gpio); + return -EINVAL; + } + pdata->buck2_set3 = gpio; + + return 0; +} + +static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev, + struct max8998_platform_data *pdata) +{ + struct device_node *pmic_np = iodev->dev->of_node; + struct device_node *regulators_np, *reg_np; + struct max8998_regulator_data *rdata; + unsigned int i; + int ret; + + regulators_np = of_get_child_by_name(pmic_np, "regulators"); + if (!regulators_np) { + dev_err(iodev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + + /* count the number of regulators to be supported in pmic */ + pdata->num_regulators = of_get_child_count(regulators_np); + + rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) * + pdata->num_regulators, GFP_KERNEL); + if (!rdata) + return -ENOMEM; + + pdata->regulators = rdata; + for (i = 0; i < ARRAY_SIZE(regulators); ++i) { + reg_np = of_get_child_by_name(regulators_np, + regulators[i].name); + if (!reg_np) + continue; + + rdata->id = regulators[i].id; + rdata->initdata = of_get_regulator_init_data( + iodev->dev, reg_np); + rdata->reg_node = reg_np; + ++rdata; + } + pdata->num_regulators = rdata - pdata->regulators; + + ret = max8998_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np); + if (ret) + return -EINVAL; + + if (of_find_property(pmic_np, "max8998,pmic-buck-voltage-lock", NULL)) + pdata->buck_voltage_lock = true; + + ret = of_property_read_u32(pmic_np, + "max8998,pmic-buck1-default-dvs-idx", + &pdata->buck1_default_idx); + if (!ret && pdata->buck1_default_idx >= 4) { + pdata->buck1_default_idx = 0; + dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n"); + } + + ret = of_property_read_u32(pmic_np, + "max8998,pmic-buck2-default-dvs-idx", + &pdata->buck2_default_idx); + if (!ret && pdata->buck2_default_idx >= 2) { + pdata->buck2_default_idx = 0; + dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n"); + } + + ret = of_property_read_u32_array(pmic_np, + "max8998,pmic-buck1-dvs-voltage", + pdata->buck1_voltage, + ARRAY_SIZE(pdata->buck1_voltage)); + if (ret) { + dev_err(iodev->dev, "buck1 voltages not specified\n"); + return -EINVAL; + } + + ret = of_property_read_u32_array(pmic_np, + "max8998,pmic-buck2-dvs-voltage", + pdata->buck2_voltage, + ARRAY_SIZE(pdata->buck2_voltage)); + if (ret) { + dev_err(iodev->dev, "buck2 voltages not specified\n"); + return -EINVAL; + } + + return 0; +} + static int max8998_pmic_probe(struct platform_device *pdev) { struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev); + struct max8998_platform_data *pdata = iodev->pdata; struct regulator_config config = { }; struct regulator_dev **rdev; struct max8998_data *max8998; @@ -637,6 +752,12 @@ static int max8998_pmic_probe(struct platform_device *pdev) return -ENODEV; } + if (IS_ENABLED(CONFIG_OF) && iodev->dev->of_node) { + ret = max8998_pmic_dt_parse_pdata(iodev, pdata); + if (ret) + return ret; + } + max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_data), GFP_KERNEL); if (!max8998) @@ -750,13 +871,15 @@ static int max8998_pmic_probe(struct platform_device *pdev) } config.dev = max8998->dev; + config.of_node = pdata->regulators[i].reg_node; config.init_data = pdata->regulators[i].initdata; config.driver_data = max8998; rdev[i] = regulator_register(®ulators[index], &config); if (IS_ERR(rdev[i])) { ret = PTR_ERR(rdev[i]); - dev_err(max8998->dev, "regulator init failed\n"); + dev_err(max8998->dev, "regulator %s init failed (%d)\n", + regulators[index].name, ret); rdev[i] = NULL; goto err; } diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c index 46f23014759b..042a8734bd28 100644 --- a/drivers/rtc/rtc-max8998.c +++ b/drivers/rtc/rtc-max8998.c @@ -253,7 +253,7 @@ static const struct rtc_class_ops max8998_rtc_ops = { static int max8998_rtc_probe(struct platform_device *pdev) { struct max8998_dev *max8998 = dev_get_drvdata(pdev->dev.parent); - struct max8998_platform_data *pdata = dev_get_platdata(max8998->dev); + struct max8998_platform_data *pdata = max8998->pdata; struct max8998_rtc_info *info; int ret; diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h index bfb48b6fcc74..84844e0a5704 100644 --- a/include/linux/mfd/max8998-private.h +++ b/include/linux/mfd/max8998-private.h @@ -137,6 +137,7 @@ struct irq_domain; /** * struct max8998_dev - max8998 master device for sub-drivers * @dev: master device of the chip (can be used to access platform data) + * @pdata: platform data for the driver and subdrivers * @i2c: i2c client private data for regulator * @rtc: i2c client private data for rtc * @iolock: mutex for serializing io access @@ -150,6 +151,7 @@ struct irq_domain; */ struct max8998_dev { struct device *dev; + struct max8998_platform_data *pdata; struct i2c_client *i2c; struct i2c_client *rtc; struct mutex iolock; diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h index ca56bb03bc69..e3956a654cbc 100644 --- a/include/linux/mfd/max8998.h +++ b/include/linux/mfd/max8998.h @@ -58,10 +58,12 @@ enum { * max8998_regulator_data - regulator data * @id: regulator id * @initdata: regulator init data (contraints, supplies, ...) + * @reg_node: DT node of regulator (unused on non-DT platforms) */ struct max8998_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *reg_node; }; /** -- 2.20.1