From ee2b805c8eb6459cf541ef141ff70dae17af59ca Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 15 Aug 2009 15:12:05 +0100 Subject: [PATCH] ARM: 5678/1: SSP/SPI PL022 polarity terminology fix The definition of the SPI clock phase for the Motorola mode of the PL022 driver was incorrect: the spec had been interpreted as data being recieved on rising or falling edge of the clocks while the correct interpretation is that data can be recieved on the first or second edge transition, falling or rising depending on the polarity setting. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/spi.c | 2 +- drivers/spi/amba-pl022.c | 8 ++++---- include/linux/amba/pl022.h | 8 ++++---- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index 307d007ea7f3..f0e887bea30e 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -48,7 +48,7 @@ struct pl022_config_chip dummy_chip_info = { .data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */ .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_FALLING_EDGE, + .clk_phase = SSP_CLK_SECOND_EDGE, .clk_pol = SSP_CLK_POL_IDLE_LOW, .ctrl_len = SSP_BITS_12, .wait_state = SSP_MWIRE_WAIT_ZERO, diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index da76797ce8b9..35521af0d0d7 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -534,7 +534,7 @@ static void restore_state(struct pl022 *pl022) GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \ GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \ GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ - GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \ + GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \ GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16) | \ GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \ @@ -1249,8 +1249,8 @@ static int verify_controller_parameters(struct pl022 *pl022, return -EINVAL; } if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) { - if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE) - && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) { + if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE) + && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) { dev_err(chip_info->dev, "Clock Phase is configured incorrectly\n"); return -EINVAL; @@ -1487,7 +1487,7 @@ static int pl022_setup(struct spi_device *spi) chip_info->data_size = SSP_DATA_BITS_12; chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM; chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC; - chip_info->clk_phase = SSP_CLK_FALLING_EDGE; + chip_info->clk_phase = SSP_CLK_SECOND_EDGE; chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW; chip_info->ctrl_len = SSP_BITS_8; chip_info->wait_state = SSP_MWIRE_WAIT_ZERO; diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index dcad0ffd1755..e4836c6b3dd7 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -136,12 +136,12 @@ enum ssp_tx_level_trig { /** * enum SPI Clock Phase - clock phase (Motorola SPI interface only) - * @SSP_CLK_RISING_EDGE: Receive data on rising edge - * @SSP_CLK_FALLING_EDGE: Receive data on falling edge + * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity) + * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity) */ enum ssp_spi_clk_phase { - SSP_CLK_RISING_EDGE, - SSP_CLK_FALLING_EDGE + SSP_CLK_FIRST_EDGE, + SSP_CLK_SECOND_EDGE }; /** -- 2.20.1