From ed783500474e66e696e60bed366f5345afa6083c Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 2 Jan 2022 18:42:44 +0100 Subject: [PATCH] serial: pl010: Drop CR register reset on set_termios [ Upstream commit 08a0c6dff91c965e39905cf200d22db989203ccb ] pl010_set_termios() briefly resets the CR register to zero. Where does this register write come from? The PL010 driver's IRQ handler ambauart_int() originally modified the CR register without holding the port spinlock. ambauart_set_termios() also modified that register. To prevent concurrent read-modify-writes by the IRQ handler and to prevent transmission while changing baudrate, ambauart_set_termios() had to disable interrupts. That is achieved by writing zero to the CR register. However in 2004 the PL010 driver was amended to acquire the port spinlock in the IRQ handler, obviating the need to disable interrupts in ->set_termios(): https://git.kernel.org/history/history/c/157c0342e591 That rendered the CR register write obsolete. Drop it. Cc: Russell King Signed-off-by: Lukas Wunner Link: https://lore.kernel.org/r/fcaff16e5b1abb4cc3da5a2879ac13f278b99ed0.1641128728.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/amba-pl010.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index 9ec4b8d2879f..0698fbf3b6d6 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -465,14 +465,11 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios, if ((termios->c_cflag & CREAD) == 0) uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; - /* first, disable everything */ old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; if (UART_ENABLE_MS(port, termios->c_cflag)) old_cr |= UART010_CR_MSIE; - writel(0, uap->port.membase + UART010_CR); - /* Set baud rate */ quot -= 1; writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); -- 2.20.1