From ed4a26b0995baf10807ebb3f18fba3db2c6539fc Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 27 Aug 2015 21:49:18 +0200 Subject: [PATCH] at86rf230: interrupt tx with force trx_off To abort a TX_ARET_BUSY state it's recommended to switch into TRX_OFF state by doing STATE_TRX_FORCE_OFF. This patch will do always a TRX_OFF state change when the transceiver stucks in any state. From TRX_OFF we can switch to the states which are also possible by TX_ON state. Signed-off-by: Alexander Aring Reviewed-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 39485d06bea1..1e71a9781f33 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -377,14 +377,6 @@ at86rf230_async_read_reg(struct at86rf230_local *lp, const u8 reg, } } -static inline u8 at86rf230_state_to_force(u8 state) -{ - if (state == STATE_TX_ON) - return STATE_FORCE_TX_ON; - else - return STATE_FORCE_TRX_OFF; -} - static void at86rf230_async_state_assert(void *context) { @@ -426,7 +418,7 @@ at86rf230_async_state_assert(void *context) u8 state = ctx->to_state; if (lp->tx_retry >= AT86RF2XX_MAX_TX_RETRIES) - state = at86rf230_state_to_force(state); + state = STATE_FORCE_TRX_OFF; lp->tx_retry++; at86rf230_async_state_change(lp, ctx, state, -- 2.20.1