From ece1d63619df010b8c4f08e43755e2a03f3b6eed Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Apr 2006 18:51:53 +0900 Subject: [PATCH] [PATCH] libata: separate out libata-eh.c A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/Makefile | 2 +- drivers/scsi/libata-core.c | 102 +------------- drivers/scsi/libata-eh.c | 264 +++++++++++++++++++++++++++++++++++++ drivers/scsi/libata-scsi.c | 130 ------------------ drivers/scsi/libata.h | 4 +- include/linux/libata.h | 12 +- 6 files changed, 281 insertions(+), 233 deletions(-) create mode 100644 drivers/scsi/libata-eh.c diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index e513c3158ad9..503f189dab3b 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -165,7 +165,7 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -libata-objs := libata-core.o libata-scsi.o libata-bmdma.o +libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o # Files generated that shall be removed upon make clean diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 66b48b11fa0e..186a9ce4f072 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4015,99 +4015,6 @@ err_out: ata_poll_qc_complete(qc); } -/** - * ata_qc_timeout - Handle timeout of queued command - * @qc: Command that timed out - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ - -static void ata_qc_timeout(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - u8 host_stat = 0, drv_stat; - unsigned long flags; - - DPRINTK("ENTER\n"); - - ap->hsm_task_state = HSM_ST_IDLE; - - spin_lock_irqsave(&host_set->lock, flags); - - switch (qc->tf.protocol) { - - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - host_stat = ap->ops->bmdma_status(ap); - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ - - default: - ata_altstatus(ap); - drv_stat = ata_chk_status(ap); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", - ap->id, qc->tf.command, drv_stat, host_stat); - - /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(drv_stat); - break; - } - - spin_unlock_irqrestore(&host_set->lock, flags); - - ata_eh_qc_complete(qc); - - DPRINTK("EXIT\n"); -} - -/** - * ata_eng_timeout - Handle timeout of queued command - * @ap: Port on which timed-out command is active - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ - -void ata_eng_timeout(struct ata_port *ap) -{ - DPRINTK("ENTER\n"); - - ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); - - DPRINTK("EXIT\n"); -} - /** * ata_qc_new - Request an available ATA command, for queueing * @ap: Port associated with device @dev @@ -5145,7 +5052,6 @@ EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); EXPORT_SYMBOL_GPL(__ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_issue_prot); -EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_tf_load); EXPORT_SYMBOL_GPL(ata_tf_read); EXPORT_SYMBOL_GPL(ata_noop_dev_select); @@ -5185,15 +5091,12 @@ EXPORT_SYMBOL_GPL(ata_busy_sleep); EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); -EXPORT_SYMBOL_GPL(ata_scsi_error); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); -EXPORT_SYMBOL_GPL(ata_eh_qc_complete); -EXPORT_SYMBOL_GPL(ata_eh_qc_retry); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_compute); @@ -5215,3 +5118,8 @@ EXPORT_SYMBOL_GPL(ata_device_suspend); EXPORT_SYMBOL_GPL(ata_device_resume); EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); EXPORT_SYMBOL_GPL(ata_scsi_device_resume); + +EXPORT_SYMBOL_GPL(ata_scsi_error); +EXPORT_SYMBOL_GPL(ata_eng_timeout); +EXPORT_SYMBOL_GPL(ata_eh_qc_complete); +EXPORT_SYMBOL_GPL(ata_eh_qc_retry); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c new file mode 100644 index 000000000000..e73f5612aea8 --- /dev/null +++ b/drivers/scsi/libata-eh.c @@ -0,0 +1,264 @@ +/* + * libata-eh.c - libata error handling + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2006 Tejun Heo + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, + * USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "libata.h" + +/** + * ata_scsi_timed_out - SCSI layer time out callback + * @cmd: timed out SCSI command + * + * Handles SCSI layer timeout. We race with normal completion of + * the qc for @cmd. If the qc is already gone, we lose and let + * the scsi command finish (EH_HANDLED). Otherwise, the qc has + * timed out and EH should be invoked. Prevent ata_qc_complete() + * from finishing it by setting EH_SCHEDULED and return + * EH_NOT_HANDLED. + * + * LOCKING: + * Called from timer context + * + * RETURNS: + * EH_HANDLED or EH_NOT_HANDLED + */ +enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; + unsigned long flags; + struct ata_queued_cmd *qc; + enum scsi_eh_timer_return ret = EH_HANDLED; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(&ap->host_set->lock, flags); + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc) { + WARN_ON(qc->scsicmd != cmd); + qc->flags |= ATA_QCFLAG_EH_SCHEDULED; + qc->err_mask |= AC_ERR_TIMEOUT; + ret = EH_NOT_HANDLED; + } + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("EXIT, ret=%d\n", ret); + return ret; +} + +/** + * ata_scsi_error - SCSI layer error handler callback + * @host: SCSI host on which error occurred + * + * Handles SCSI-layer-thrown error events. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + * + * RETURNS: + * Zero. + */ +int ata_scsi_error(struct Scsi_Host *host) +{ + struct ata_port *ap = (struct ata_port *)&host->hostdata[0]; + + DPRINTK("ENTER\n"); + + /* synchronize with IRQ handler and port task */ + spin_unlock_wait(&ap->host_set->lock); + ata_port_flush_task(ap); + + WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); + + ap->ops->eng_timeout(ap); + + WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); + + scsi_eh_flush_done_q(&ap->eh_done_q); + + DPRINTK("EXIT\n"); + return 0; +} + +/** + * ata_qc_timeout - Handle timeout of queued command + * @qc: Command that timed out + * + * Some part of the kernel (currently, only the SCSI layer) + * has noticed that the active command on port @ap has not + * completed after a specified length of time. Handle this + * condition by disabling DMA (if necessary) and completing + * transactions, with error if necessary. + * + * This also handles the case of the "lost interrupt", where + * for some reason (possibly hardware bug, possibly driver bug) + * an interrupt was not delivered to the driver, even though the + * transaction completed successfully. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + */ +static void ata_qc_timeout(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_host_set *host_set = ap->host_set; + u8 host_stat = 0, drv_stat; + unsigned long flags; + + DPRINTK("ENTER\n"); + + ap->hsm_task_state = HSM_ST_IDLE; + + spin_lock_irqsave(&host_set->lock, flags); + + switch (qc->tf.protocol) { + + case ATA_PROT_DMA: + case ATA_PROT_ATAPI_DMA: + host_stat = ap->ops->bmdma_status(ap); + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + /* fall through */ + + default: + ata_altstatus(ap); + drv_stat = ata_chk_status(ap); + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", + ap->id, qc->tf.command, drv_stat, host_stat); + + /* complete taskfile transaction */ + qc->err_mask |= ac_err_mask(drv_stat); + break; + } + + spin_unlock_irqrestore(&host_set->lock, flags); + + ata_eh_qc_complete(qc); + + DPRINTK("EXIT\n"); +} + +/** + * ata_eng_timeout - Handle timeout of queued command + * @ap: Port on which timed-out command is active + * + * Some part of the kernel (currently, only the SCSI layer) + * has noticed that the active command on port @ap has not + * completed after a specified length of time. Handle this + * condition by disabling DMA (if necessary) and completing + * transactions, with error if necessary. + * + * This also handles the case of the "lost interrupt", where + * for some reason (possibly hardware bug, possibly driver bug) + * an interrupt was not delivered to the driver, even though the + * transaction completed successfully. + * + * LOCKING: + * Inherited from SCSI layer (none, can sleep) + */ +void ata_eng_timeout(struct ata_port *ap) +{ + DPRINTK("ENTER\n"); + + ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); + + DPRINTK("EXIT\n"); +} + +static void ata_eh_scsidone(struct scsi_cmnd *scmd) +{ + /* nada */ +} + +static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *scmd = qc->scsicmd; + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + qc->scsidone = ata_eh_scsidone; + __ata_qc_complete(qc); + WARN_ON(ata_tag_valid(qc->tag)); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + scsi_eh_finish_cmd(scmd, &ap->eh_done_q); +} + +/** + * ata_eh_qc_complete - Complete an active ATA command from EH + * @qc: Command to complete + * + * Indicate to the mid and upper layers that an ATA command has + * completed. To be used from EH. + */ +void ata_eh_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + scmd->retries = scmd->allowed; + __ata_eh_qc_complete(qc); +} + +/** + * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH + * @qc: Command to retry + * + * Indicate to the mid and upper layers that an ATA command + * should be retried. To be used from EH. + * + * SCSI midlayer limits the number of retries to scmd->allowed. + * scmd->retries is decremented for commands which get retried + * due to unrelated failures (qc->err_mask is zero). + */ +void ata_eh_qc_retry(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + if (!qc->err_mask && scmd->retries) + scmd->retries--; + __ata_eh_qc_complete(qc); +} diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 44008150d310..745fc263feeb 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -53,7 +53,6 @@ typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); -enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); #define RW_RECOVERY_MPAGE 0x1 #define RW_RECOVERY_MPAGE_LEN 12 @@ -713,135 +712,6 @@ int ata_scsi_slave_config(struct scsi_device *sdev) return 0; /* scsi layer doesn't check return value, sigh */ } -/** - * ata_scsi_timed_out - SCSI layer time out callback - * @cmd: timed out SCSI command - * - * Handles SCSI layer timeout. We race with normal completion of - * the qc for @cmd. If the qc is already gone, we lose and let - * the scsi command finish (EH_HANDLED). Otherwise, the qc has - * timed out and EH should be invoked. Prevent ata_qc_complete() - * from finishing it by setting EH_SCHEDULED and return - * EH_NOT_HANDLED. - * - * LOCKING: - * Called from timer context - * - * RETURNS: - * EH_HANDLED or EH_NOT_HANDLED - */ -enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) -{ - struct Scsi_Host *host = cmd->device->host; - struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; - unsigned long flags; - struct ata_queued_cmd *qc; - enum scsi_eh_timer_return ret = EH_HANDLED; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(&ap->host_set->lock, flags); - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) { - WARN_ON(qc->scsicmd != cmd); - qc->flags |= ATA_QCFLAG_EH_SCHEDULED; - qc->err_mask |= AC_ERR_TIMEOUT; - ret = EH_NOT_HANDLED; - } - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - DPRINTK("EXIT, ret=%d\n", ret); - return ret; -} - -/** - * ata_scsi_error - SCSI layer error handler callback - * @host: SCSI host on which error occurred - * - * Handles SCSI-layer-thrown error events. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - * - * RETURNS: - * Zero. - */ - -int ata_scsi_error(struct Scsi_Host *host) -{ - struct ata_port *ap = (struct ata_port *)&host->hostdata[0]; - - DPRINTK("ENTER\n"); - - /* synchronize with IRQ handler and port task */ - spin_unlock_wait(&ap->host_set->lock); - ata_port_flush_task(ap); - - WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); - - ap->ops->eng_timeout(ap); - - WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); - - scsi_eh_flush_done_q(&ap->eh_done_q); - - DPRINTK("EXIT\n"); - return 0; -} - -static void ata_eh_scsidone(struct scsi_cmnd *scmd) -{ - /* nada */ -} - -static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scsi_cmnd *scmd = qc->scsicmd; - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - qc->scsidone = ata_eh_scsidone; - __ata_qc_complete(qc); - WARN_ON(ata_tag_valid(qc->tag)); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - scsi_eh_finish_cmd(scmd, &ap->eh_done_q); -} - -/** - * ata_eh_qc_complete - Complete an active ATA command from EH - * @qc: Command to complete - * - * Indicate to the mid and upper layers that an ATA command has - * completed. To be used from EH. - */ -void ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *scmd = qc->scsicmd; - scmd->retries = scmd->allowed; - __ata_eh_qc_complete(qc); -} - -/** - * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH - * @qc: Command to retry - * - * Indicate to the mid and upper layers that an ATA command - * should be retried. To be used from EH. - * - * SCSI midlayer limits the number of retries to scmd->allowed. - * scmd->retries is decremented for commands which get retried - * due to unrelated failures (qc->err_mask is zero). - */ -void ata_eh_qc_retry(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *scmd = qc->scsicmd; - if (!qc->err_mask && scmd->retries) - scmd->retries--; - __ata_eh_qc_complete(qc); -} - /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 1c755b14521a..75e9bd5833da 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -60,7 +60,6 @@ extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct scsi_transport_template ata_scsi_transport_template; extern void ata_scsi_scan_host(struct ata_port *ap); -extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen); @@ -90,4 +89,7 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); +/* libata-eh.c */ +extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); + #endif /* __LIBATA_H__ */ diff --git a/include/linux/libata.h b/include/linux/libata.h index a6d829cb0567..75bdee09c307 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -531,9 +531,6 @@ extern void ata_host_set_remove(struct ata_host_set *host_set); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); -extern int ata_scsi_error(struct Scsi_Host *host); -extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); -extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); extern int ata_scsi_device_resume(struct scsi_device *); @@ -582,7 +579,6 @@ extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern void ata_eng_timeout(struct ata_port *ap); extern void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); @@ -637,6 +633,14 @@ extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bit extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_device *, unsigned long); #endif /* CONFIG_PCI */ +/* + * EH + */ +extern int ata_scsi_error(struct Scsi_Host *host); +extern void ata_eng_timeout(struct ata_port *ap); +extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); +extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); + static inline int ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc) -- 2.20.1