From ecd910eb1f091dd25f4a737a3bc50c0c8892eac7 Mon Sep 17 00:00:00 2001 From: Andres Rodriguez Date: Fri, 24 Feb 2017 20:50:20 -0500 Subject: [PATCH] drm/amdgpu: workaround tonga HW bug in HQD programming sequence Tonga based asics may experience hangs when an HQD's EOP parameters are modified. Workaround this HW issue by avoiding writes to these registers for tonga asics. Based on the following ROCm commit: 2a0fb8 - drm/amdgpu: Synchronize KFD HQD load protocol with CP scheduler From the ROCm git repository: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver.git CC: Jay Cornwall Suggested-by: Felix Kuehling Reviewed-by: Felix Kuehling Signed-off-by: Andres Rodriguez Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 29ec429a54c5..69d9bbd4e878 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -5070,7 +5070,21 @@ int gfx_v8_0_mqd_commit(struct amdgpu_device *adev, WREG32_FIELD(CP_PQ_WPTR_POLL_CNTL, EN, 0); /* program all HQD registers */ - for (mqd_reg = mmCP_HQD_VMID; mqd_reg <= mmCP_HQD_ERROR; mqd_reg++) + for (mqd_reg = mmCP_HQD_VMID; mqd_reg <= mmCP_HQD_EOP_CONTROL; mqd_reg++) + WREG32(mqd_reg, mqd_data[mqd_reg - mmCP_MQD_BASE_ADDR]); + + /* Tonga errata: EOP RPTR/WPTR should be left unmodified. + * This is safe since EOP RPTR==WPTR for any inactive HQD + * on ASICs that do not support context-save. + * EOP writes/reads can start anywhere in the ring. + */ + if (adev->asic_type != CHIP_TONGA) { + WREG32(mmCP_HQD_EOP_RPTR, mqd->cp_hqd_eop_rptr); + WREG32(mmCP_HQD_EOP_WPTR, mqd->cp_hqd_eop_wptr); + WREG32(mmCP_HQD_EOP_WPTR_MEM, mqd->cp_hqd_eop_wptr_mem); + } + + for (mqd_reg = mmCP_HQD_EOP_EVENTS; mqd_reg <= mmCP_HQD_ERROR; mqd_reg++) WREG32(mqd_reg, mqd_data[mqd_reg - mmCP_MQD_BASE_ADDR]); /* activate the HQD */ -- 2.20.1