From ec6b925579b40225d58f0374ada0e40a003cde16 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 12 Apr 2016 11:46:37 -0600 Subject: [PATCH] ARM: tegra: Add DT binding for Tegra186 GPIO controllers Tegra186 contains two separate but mostly similar GPIO controllers. Register layout differs significantly from previous Tegra generations, and so a new binding is required to describe them in device tree. This patch adds that binding. Signed-off-by: Stephen Warren Acked-by: Rob Herring Acked-by: Linus Walleij Signed-off-by: Thierry Reding --- .../bindings/gpio/nvidia,tegra186-gpio.txt | 161 ++++++++++++++++++ include/dt-bindings/gpio/tegra186-gpio.h | 56 ++++++ 2 files changed, 217 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt create mode 100644 include/dt-bindings/gpio/tegra186-gpio.h diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt new file mode 100644 index 000000000000..c82a2e221bc1 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt @@ -0,0 +1,161 @@ +NVIDIA Tegra186 GPIO controllers + +Tegra186 contains two GPIO controllers; a main controller and an "AON" +controller. This binding document applies to both controllers. The register +layouts for the controllers share many similarities, but also some significant +differences. Hence, this document describes closely related but different +bindings and compatible values. + +The Tegra186 GPIO controller allows software to set the IO direction of, and +read/write the value of, numerous GPIO signals. Routing of GPIO signals to +package balls is under the control of a separate pin controller HW block. Two +major sets of registers exist: + +a) Security registers, which allow configuration of allowed access to the GPIO +register set. These registers exist in a single contiguous block of physical +address space. The size of this block, and the security features available, +varies between the different GPIO controllers. + +Access to this set of registers is not necessary in all circumstances. Code +that wishes to configure access to the GPIO registers needs access to these +registers to do so. Code which simply wishes to read or write GPIO data does not +need access to these registers. + +b) GPIO registers, which allow manipulation of the GPIO signals. In some GPIO +controllers, these registers are exposed via multiple "physical aliases" in +address space, each of which access the same underlying state. See the hardware +documentation for rationale. Any particular GPIO client is expected to access +just one of these physical aliases. + +Tegra HW documentation describes a unified naming convention for all GPIOs +implemented by the SoC. Each GPIO is assigned to a port, and a port may control +a number of GPIOs. Thus, each GPIO is named according to an alphabetical port +name and an integer GPIO name within the port. For example, GPIO_PA0, GPIO_PN6, +or GPIO_PCC3. + +The number of ports implemented by each GPIO controller varies. The number of +implemented GPIOs within each port varies. GPIO registers within a controller +are grouped and laid out according to the port they affect. + +The mapping from port name to the GPIO controller that implements that port, and +the mapping from port name to register offset within a controller, are both +extremely non-linear. The header file +describes the port-level mapping. In that file, the naming convention for ports +matches the HW documentation. The values chosen for the names are alphabetically +sorted within a particular controller. Drivers need to map between the DT GPIO +IDs and HW register offsets using a lookup table. + +Each GPIO controller can generate a number of interrupt signals. Each signal +represents the aggregate status for all GPIOs within a set of ports. Thus, the +number of interrupt signals generated by a controller varies as a rough function +of the number of ports it implements. Note that the HW documentation refers to +both the overall controller HW module and the sets-of-ports as "controllers". + +Each GPIO controller in fact generates multiple interrupts signals for each set +of ports. Each GPIO may be configured to feed into a specific one of the +interrupt signals generated by a set-of-ports. The intent is for each generated +signal to be routed to a different CPU, thus allowing different CPUs to each +handle subsets of the interrupts within a port. The status of each of these +per-port-set signals is reported via a separate register. Thus, a driver needs +to know which status register to observe. This binding currently defines no +configuration mechanism for this. By default, drivers should use register +GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could +define a property to configure this. + +Required properties: +- compatible + Array of strings. + One of: + - "nvidia,tegra186-gpio". + - "nvidia,tegra186-gpio-aon". +- reg-names + Array of strings. + Contains a list of names for the register spaces described by the reg + property. May contain the following entries, in any order: + - "gpio": Mandatory. GPIO control registers. This may cover either: + a) The single physical alias that this OS should use. + b) All physical aliases that exist in the controller. This is + appropriate when the OS is responsible for managing assignment of + the physical aliases. + - "security": Optional. Security configuration registers. + Users of this binding MUST look up entries in the reg property by name, + using this reg-names property to do so. +- reg + Array of (physical base address, length) tuples. + Must contain one entry per entry in the reg-names property, in a matching + order. +- interrupts + Array of interrupt specifiers. + The interrupt outputs from the HW block, one per set of ports, in the + order the HW manual describes them. The number of entries required varies + depending on compatible value: + - "nvidia,tegra186-gpio": 6 entries. + - "nvidia,tegra186-gpio-aon": 1 entry. +- gpio-controller + Boolean. + Marks the device node as a GPIO controller/provider. +- #gpio-cells + Single-cell integer. + Must be <2>. + Indicates how many cells are used in a consumer's GPIO specifier. + In the specifier: + - The first cell is the pin number. + See . + - The second cell contains flags: + - Bit 0 specifies polarity + - 0: Active-high (normal). + - 1: Active-low (inverted). +- interrupt-controller + Boolean. + Marks the device node as an interrupt controller/provider. +- #interrupt-cells + Single-cell integer. + Must be <2>. + Indicates how many cells are used in a consumer's interrupt specifier. + In the specifier: + - The first cell is the GPIO number. + See . + - The second cell is contains flags: + - Bits [3:0] indicate trigger type and level: + - 1: Low-to-high edge triggered. + - 2: High-to-low edge triggered. + - 4: Active high level-sensitive. + - 8: Active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. + +Example: + +#include + +gpio@2200000 { + compatible = "nvidia,tegra186-gpio"; + reg-names = "security", "gpio"; + reg = + <0x0 0x2200000 0x0 0x10000>, + <0x0 0x2210000 0x0 0x10000>; + interrupts = + <0 47 IRQ_TYPE_LEVEL_HIGH>, + <0 50 IRQ_TYPE_LEVEL_HIGH>, + <0 53 IRQ_TYPE_LEVEL_HIGH>, + <0 56 IRQ_TYPE_LEVEL_HIGH>, + <0 59 IRQ_TYPE_LEVEL_HIGH>, + <0 180 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; + +gpio@c2f0000 { + compatible = "nvidia,tegra186-gpio-aon"; + reg-names = "security", "gpio"; + reg = + <0x0 0xc2f0000 0x0 0x1000>, + <0x0 0xc2f1000 0x0 0x1000>; + interrupts = + <0 60 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/include/dt-bindings/gpio/tegra186-gpio.h b/include/dt-bindings/gpio/tegra186-gpio.h new file mode 100644 index 000000000000..38001c7023f1 --- /dev/null +++ b/include/dt-bindings/gpio/tegra186-gpio.h @@ -0,0 +1,56 @@ +/* + * This header provides constants for binding nvidia,tegra186-gpio*. + * + * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below + * provide names for this. + * + * The second cell contains standard flag values specified in gpio.h. + */ + +#ifndef _DT_BINDINGS_GPIO_TEGRA_GPIO_H +#define _DT_BINDINGS_GPIO_TEGRA_GPIO_H + +#include + +/* GPIOs implemented by main GPIO controller */ +#define TEGRA_MAIN_GPIO_PORT_A 0 +#define TEGRA_MAIN_GPIO_PORT_B 1 +#define TEGRA_MAIN_GPIO_PORT_C 2 +#define TEGRA_MAIN_GPIO_PORT_D 3 +#define TEGRA_MAIN_GPIO_PORT_E 4 +#define TEGRA_MAIN_GPIO_PORT_F 5 +#define TEGRA_MAIN_GPIO_PORT_G 6 +#define TEGRA_MAIN_GPIO_PORT_H 7 +#define TEGRA_MAIN_GPIO_PORT_I 8 +#define TEGRA_MAIN_GPIO_PORT_J 9 +#define TEGRA_MAIN_GPIO_PORT_K 10 +#define TEGRA_MAIN_GPIO_PORT_L 11 +#define TEGRA_MAIN_GPIO_PORT_M 12 +#define TEGRA_MAIN_GPIO_PORT_N 13 +#define TEGRA_MAIN_GPIO_PORT_O 14 +#define TEGRA_MAIN_GPIO_PORT_P 15 +#define TEGRA_MAIN_GPIO_PORT_Q 16 +#define TEGRA_MAIN_GPIO_PORT_R 17 +#define TEGRA_MAIN_GPIO_PORT_T 18 +#define TEGRA_MAIN_GPIO_PORT_X 19 +#define TEGRA_MAIN_GPIO_PORT_Y 20 +#define TEGRA_MAIN_GPIO_PORT_BB 21 +#define TEGRA_MAIN_GPIO_PORT_CC 22 + +#define TEGRA_MAIN_GPIO(port, offset) \ + ((TEGRA_MAIN_GPIO_PORT_##port * 8) + offset) + +/* GPIOs implemented by AON GPIO controller */ +#define TEGRA_AON_GPIO_PORT_S 0 +#define TEGRA_AON_GPIO_PORT_U 1 +#define TEGRA_AON_GPIO_PORT_V 2 +#define TEGRA_AON_GPIO_PORT_W 3 +#define TEGRA_AON_GPIO_PORT_Z 4 +#define TEGRA_AON_GPIO_PORT_AA 5 +#define TEGRA_AON_GPIO_PORT_EE 6 +#define TEGRA_AON_GPIO_PORT_FF 7 + +#define TEGRA_AON_GPIO(port, offset) \ + ((TEGRA_AON_GPIO_PORT_##port * 8) + offset) + +#endif -- 2.20.1