From ebfb319bb601e501f77809a83b0b69b529c22a8d Mon Sep 17 00:00:00 2001 From: Konstantin Shkolnyy Date: Wed, 28 Oct 2015 16:02:03 -0500 Subject: [PATCH] USB: cp210x: flush device queues at close Flush all device queues at close in order to work around a cp2108 Tx queue bug. Occasionally, writing data and immediately closing the port makes cp2108 stop responding. The device has to be unplugged to clear the error. The failure is induced by shutting down the device while its Tx queue still has unsent data. This condition is avoided by issuing PURGE command from the close() callback. This change is applied to all cp210x devices. Clearing internal queues on close is generally good. Signed-off-by: Konstantin Shkolnyy [johan: amend commit message ] Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index eac7ccaa3c85..8ba1005f6a53 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -300,6 +300,14 @@ static struct usb_serial_driver * const serial_drivers[] = { #define CONTROL_WRITE_DTR 0x0100 #define CONTROL_WRITE_RTS 0x0200 +/* + * CP210X_PURGE - 16 bits passed in wValue of USB request. + * SiLabs app note AN571 gives a strange description of the 4 bits: + * bit 0 or bit 2 clears the transmit queue and 1 or 3 receive. + * writing 1 to all, however, purges cp2108 well enough to avoid the hang. + */ +#define PURGE_ALL 0x000f + /* * cp210x_get_config * Reads from the CP210x configuration registers @@ -475,7 +483,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) static void cp210x_close(struct usb_serial_port *port) { + unsigned int purge_ctl; + usb_serial_generic_close(port); + + /* Clear both queues; cp2108 needs this to avoid an occasional hang */ + purge_ctl = PURGE_ALL; + cp210x_set_config(port, CP210X_PURGE, &purge_ctl, 2); + cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); } -- 2.20.1