From ea8179a72844b30d046cdcc932231872f2dbcc90 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 6 Mar 2013 09:02:47 +0000 Subject: [PATCH] e1000e: long access timeouts when I217/I218 MAC and PHY are out of sync When the MAC and PHY are in two different modes (different power levels and interconnect speeds), it could take a long time before a PHY register access timed out using the existing MAC-PHY interconnect configuration coded into the driver for ICH- and PCH-based LOMs. Introduce an I217/I218- specific .setup_physical_interface operation which does not override the interconnect configuration in the NVM. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 29 ++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 4f2f0f69a48e..3b1c1a7e5dac 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -142,6 +142,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); +static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -636,6 +637,8 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) if (mac->type == e1000_pch_lpt) { mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES; mac->ops.rar_set = e1000_rar_set_pch_lpt; + mac->ops.setup_physical_interface = + e1000_setup_copper_link_pch_lpt; } /* Enable PCS Lock-loss workaround for ICH8 */ @@ -3788,7 +3791,6 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) break; case e1000_phy_82577: case e1000_phy_82579: - case e1000_phy_i217: ret_val = e1000_copper_link_setup_82577(hw); if (ret_val) return ret_val; @@ -3823,6 +3825,31 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) return e1000e_setup_copper_link(hw); } +/** + * e1000_setup_copper_link_pch_lpt - Configure MAC/PHY interface + * @hw: pointer to the HW structure + * + * Calls the PHY specific link setup function and then calls the + * generic setup_copper_link to finish configuring the link for + * Lynxpoint PCH devices + **/ +static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ew32(CTRL, ctrl); + + ret_val = e1000_copper_link_setup_82577(hw); + if (ret_val) + return ret_val; + + return e1000e_setup_copper_link(hw); +} + /** * e1000_get_link_up_info_ich8lan - Get current link speed and duplex * @hw: pointer to the HW structure -- 2.20.1