From e99b82d558b1fcc61a029d8e7b3f2a970371ca24 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 28 Jun 2009 16:19:45 +0200 Subject: [PATCH] Staging: rtl8187se: remove unused rtl8225_rf_* functions Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/r8180_core.c | 4 - drivers/staging/rtl8187se/r8180_rtl8225.c | 369 ---------------------- drivers/staging/rtl8187se/r8180_rtl8225.h | 4 - 3 files changed, 377 deletions(-) diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 08960f8e55a6..18646827c8ff 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -3613,10 +3613,6 @@ DMESG output to andreamrl@tiscali.it THANKS"); priv->rf_init = rtl8225z2_rf_init; priv->rf_set_chan = rtl8225z2_rf_set_chan; priv->rf_set_sens = NULL; - //priv->rf_sleep = rtl8225_rf_sleep; - //priv->rf_wakeup = rtl8225_rf_wakeup; - - if(!priv->card_8185){ if(priv->antb) diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.c b/drivers/staging/rtl8187se/r8180_rtl8225.c index 81c4620685a6..a132f6a36a62 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225.c +++ b/drivers/staging/rtl8187se/r8180_rtl8225.c @@ -178,17 +178,6 @@ void write_rtl8225(struct net_device *dev, u8 adr, u16 data) rtl8185_rf_pins_enable(dev); } -void rtl8225_rf_close(struct net_device *dev) -{ - write_rtl8225(dev, 0x4, 0x1f); - - force_pci_posting(dev); - mdelay(1); - - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_OFF); - rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_OFF); -} - void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch) { struct r8180_priv *priv = ieee80211_priv(dev); @@ -354,361 +343,3 @@ void rtl8225_host_pci_init(struct net_device *dev) void rtl8225_host_usb_init(struct net_device *dev) { } - -void rtl8225_rf_sleep(struct net_device *dev) -{ - write_rtl8225(dev,0x4,0xdff); - force_pci_posting(dev); - mdelay(1); - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_SLEEP); - rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_SLEEP); - force_pci_posting(dev); -} - -void rtl8225_rf_wakeup(struct net_device *dev) -{ - write_rtl8225(dev,0x4,0x9ff); - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON); - rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON); - force_pci_posting(dev); -} - -void rtl8225_rf_init(struct net_device *dev) -{ - struct r8180_priv *priv = ieee80211_priv(dev); - int i; - short channel = 1; - u16 brsr; - - priv->chan = channel; - - rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON); - - - if(priv->card_type == USB) - rtl8225_host_usb_init(dev); - else - rtl8225_host_pci_init(dev); - - write_nic_dword(dev, RF_TIMING, 0x000a8008); - - brsr = read_nic_word(dev, BRSR); - - write_nic_word(dev, BRSR, 0xffff); - - write_nic_dword(dev, RF_PARA, 0x100044); - - #if 1 //0->1 - rtl8180_set_mode(dev, EPROM_CMD_CONFIG); - write_nic_byte(dev, CONFIG3, 0x44); - rtl8180_set_mode(dev, EPROM_CMD_NORMAL); - #endif - - if(priv->card_type == USB){ - rtl8185_rf_pins_enable(dev); - - mdelay(1000); - } - - write_rtl8225(dev, 0x0, 0x67); mdelay(1); - - - write_rtl8225(dev, 0x1, 0xfe0); mdelay(1); - - write_rtl8225(dev, 0x2, 0x44d); mdelay(1); - - write_rtl8225(dev, 0x3, 0x441); mdelay(1); - - if(priv->card_type == USB) - write_rtl8225(dev, 0x4, 0x486); - else - write_rtl8225(dev, 0x4, 0x8be); - - mdelay(1); - - /* version B & C */ - - if(priv->card_type == USB) - write_rtl8225(dev, 0x5, 0xbc0); - else if(priv->card_type == MINIPCI) - write_rtl8225(dev, 0x5, 0xbc0 + 3 +(6<<3)); - else - write_rtl8225(dev, 0x5, 0xbc0 + (6<<3)); - - mdelay(1); -// } - - write_rtl8225(dev, 0x6, 0xae6); mdelay(1); - - write_rtl8225(dev, 0x7, ((priv->card_type == USB)? 0x82a : rtl8225_chan[channel])); mdelay(1); - - write_rtl8225(dev, 0x8, 0x1f); mdelay(1); - - write_rtl8225(dev, 0x9, 0x334); mdelay(1); - - write_rtl8225(dev, 0xa, 0xfd4); mdelay(1); - - write_rtl8225(dev, 0xb, 0x391); mdelay(1); - - write_rtl8225(dev, 0xc, 0x50); mdelay(1); - - - write_rtl8225(dev, 0xd, 0x6db); mdelay(1); - - write_rtl8225(dev, 0xe, 0x29); mdelay(1); - - write_rtl8225(dev, 0xf, 0x914); - - if(priv->card_type == USB){ - //force_pci_posting(dev); - mdelay(100); - } - - write_rtl8225(dev, 0x2, 0xc4d); - - if(priv->card_type == USB){ - // force_pci_posting(dev); - mdelay(200); - - write_rtl8225(dev, 0x2, 0x44d); - - // force_pci_posting(dev); - mdelay(100); - - }//End of if(priv->card_type == USB) - /* FIXME!! rtl8187 we have to check if calibrarion - * is successful and eventually cal. again (repeat - * the two write on reg 2) - */ - force_pci_posting(dev); - - mdelay(100); //200 for 8187 - - //if(priv->card_type != USB) /* maybe not needed even for 8185 */ -// write_rtl8225(dev, 0x7, rtl8225_chan[channel]); - - write_rtl8225(dev, 0x0, 0x127); - - for(i=0;i<95;i++){ - write_rtl8225(dev, 0x1, (u8)(i+1)); - - /* version B & C & D*/ - - write_rtl8225(dev, 0x2, rtl8225bcd_rxgain[i]); - } - - write_rtl8225(dev, 0x0, 0x27); - - -// //if(priv->card_type != USB){ -// write_rtl8225(dev, 0x2, 0x44d); -// write_rtl8225(dev, 0x7, rtl8225_chan[channel]); -// write_rtl8225(dev, 0x2, 0x47d); -// -// force_pci_posting(dev); -// mdelay(100); -// -// write_rtl8225(dev, 0x2, 0x44d); -// //} - - write_rtl8225(dev, 0x0, 0x22f); - - if(priv->card_type != USB) - rtl8185_rf_pins_enable(dev); - - for(i=0;i<128;i++){ - write_phy_ofdm(dev, 0xb, rtl8225_agc[i]); - - mdelay(1); - write_phy_ofdm(dev, 0xa, (u8)i+ 0x80); - - mdelay(1); - } - - force_pci_posting(dev); - mdelay(1); - - write_phy_ofdm(dev, 0x0, 0x1); mdelay(1); - write_phy_ofdm(dev, 0x1, 0x2); mdelay(1); - write_phy_ofdm(dev, 0x2, ((priv->card_type == USB)? 0x42 : 0x62)); mdelay(1); - write_phy_ofdm(dev, 0x3, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x4, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x5, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x6, 0x40); mdelay(1); - write_phy_ofdm(dev, 0x7, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x8, 0x40); mdelay(1); - write_phy_ofdm(dev, 0x9, 0xfe); mdelay(1); - - /* ver C & D */ - write_phy_ofdm(dev, 0xa, 0x9); mdelay(1); - - //write_phy_ofdm(dev, 0x18, 0xef); - // } - //} - write_phy_ofdm(dev, 0xb, 0x80); mdelay(1); - - write_phy_ofdm(dev, 0xc, 0x1);mdelay(1); - - - //if(priv->card_type != USB) - //write_phy_ofdm(dev, 0xd, 0x33); // <> - - write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1); - - - write_phy_ofdm(dev, 0xf, 0x38);mdelay(1); -/*ver D & 8187*/ -// } - -// if(priv->card_8185 == 1 && priv->card_8185_Bversion) -// write_phy_ofdm(dev, 0x10, 0x04);/*ver B*/ -// else - write_phy_ofdm(dev, 0x10, 0x84);mdelay(1); -/*ver C & D & 8187*/ - - write_phy_ofdm(dev, 0x11, 0x06);mdelay(1); -/*agc resp time 700*/ - - -// if(priv->card_8185 == 2){ - /* Ver D & 8187*/ - write_phy_ofdm(dev, 0x12, 0x20);mdelay(1); - - write_phy_ofdm(dev, 0x13, 0x20);mdelay(1); - - write_phy_ofdm(dev, 0x14, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x15, 0x40); mdelay(1); - write_phy_ofdm(dev, 0x16, 0x0); mdelay(1); - write_phy_ofdm(dev, 0x17, 0x40); mdelay(1); - -// if (priv->card_type == USB) -// write_phy_ofdm(dev, 0x18, 0xef); - - write_phy_ofdm(dev, 0x18, 0xef);mdelay(1); - - - write_phy_ofdm(dev, 0x19, 0x19); mdelay(1); - write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1); - -// if (priv->card_type != USB){ -// if(priv->card_8185 == 1 && priv->card_8185_Bversion) -// write_phy_ofdm(dev, 0x1b, 0x66); /* Ver B */ -// else - write_phy_ofdm(dev, 0x1b, 0x76);mdelay(1); - /* Ver C & D */ //FIXME:MAYBE not needed -// } - - write_phy_ofdm(dev, 0x1c, 0x4);mdelay(1); - - /*ver D & 8187*/ - write_phy_ofdm(dev, 0x1e, 0x95);mdelay(1); - - write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1); - -// } - - write_phy_ofdm(dev, 0x20, 0x1f);mdelay(1); - - write_phy_ofdm(dev, 0x21, 0x27);mdelay(1); - - write_phy_ofdm(dev, 0x22, 0x16);mdelay(1); - -// if(priv->card_type != USB) - //write_phy_ofdm(dev, 0x23, 0x43); //FIXME maybe not needed // <> - - write_phy_ofdm(dev, 0x24, 0x46); mdelay(1); - write_phy_ofdm(dev, 0x25, 0x20); mdelay(1); - write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); - write_phy_ofdm(dev, 0x27, 0x88); mdelay(1); -/* Ver C & D & 8187*/ - - // <> Set init. gain to m74dBm. - write_phy_ofdm(dev, 0x0d, 0x43); mdelay(1); - write_phy_ofdm(dev, 0x1b, 0x76); mdelay(1); - write_phy_ofdm(dev, 0x1d, 0xc5); mdelay(1); - write_phy_ofdm(dev, 0x23, 0x78); mdelay(1); - - //if(priv->card_type == USB); - // rtl8225_set_gain_usb(dev, 1); /* FIXME this '2' is random */ - - write_phy_cck(dev, 0x0, 0x98); mdelay(1); - write_phy_cck(dev, 0x3, 0x20); mdelay(1); - write_phy_cck(dev, 0x4, 0x7e); mdelay(1); - write_phy_cck(dev, 0x5, 0x12); mdelay(1); - write_phy_cck(dev, 0x6, 0xfc); mdelay(1); - write_phy_cck(dev, 0x7, 0x78);mdelay(1); - /* Ver C & D & 8187*/ - - write_phy_cck(dev, 0x8, 0x2e);mdelay(1); - - write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1); - write_phy_cck(dev, 0x11, 0x88); mdelay(1); - write_phy_cck(dev, 0x12, 0x47); mdelay(1); - write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/ - - write_phy_cck(dev, 0x19, 0x0); - write_phy_cck(dev, 0x1a, 0xa0); - write_phy_cck(dev, 0x1b, 0x8); - write_phy_cck(dev, 0x40, 0x86); /* CCK Carrier Sense Threshold */ - - write_phy_cck(dev, 0x41, 0x8d);mdelay(1); - - - write_phy_cck(dev, 0x42, 0x15); mdelay(1); - write_phy_cck(dev, 0x43, 0x18); mdelay(1); - write_phy_cck(dev, 0x44, 0x1f); mdelay(1); - write_phy_cck(dev, 0x45, 0x1e); mdelay(1); - write_phy_cck(dev, 0x46, 0x1a); mdelay(1); - write_phy_cck(dev, 0x47, 0x15); mdelay(1); - write_phy_cck(dev, 0x48, 0x10); mdelay(1); - write_phy_cck(dev, 0x49, 0xa); mdelay(1); - write_phy_cck(dev, 0x4a, 0x5); mdelay(1); - write_phy_cck(dev, 0x4b, 0x2); mdelay(1); - write_phy_cck(dev, 0x4c, 0x5);mdelay(1); - - - write_nic_byte(dev, 0x5b, 0x0d); mdelay(1); - - - -// <> -// // TESTR 0xb 8187 -// write_phy_cck(dev, 0x10, 0x93);// & 0xfb); -// -// //if(priv->card_type != USB){ -// write_phy_ofdm(dev, 0x2, 0x62); -// write_phy_ofdm(dev, 0x6, 0x0); -// write_phy_ofdm(dev, 0x8, 0x0); -// //} - - rtl8225_SetTXPowerLevel(dev, channel); - - write_phy_cck(dev, 0x10, 0x9b); mdelay(1); /* Rx ant A, 0xdb for B */ - write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* Rx ant A, 0x10 for B */ - - rtl8185_tx_antenna(dev, 0x3); /* TX ant A, 0x0 for B */ - - /* switch to high-speed 3-wire - * last digit. 2 for both cck and ofdm - */ - if(priv->card_type == USB) - write_nic_dword(dev, 0x94, 0x3dc00002); - else{ - write_nic_dword(dev, 0x94, 0x15c00002); - rtl8185_rf_pins_enable(dev); - } - -// if(priv->card_type != USB) -// rtl8225_set_gain(dev, 4); /* FIXME this '1' is random */ // <> -// rtl8225_set_mode(dev, 1); /* FIXME start in B mode */ // <> -// -// /* make sure is waken up! */ -// write_rtl8225(dev,0x4, 0x9ff); -// rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON); -// rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON); - - rtl8225_rf_set_chan(dev, priv->chan); - - write_nic_word(dev,BRSR,brsr); - -} diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.h b/drivers/staging/rtl8187se/r8180_rtl8225.h index 3c4da282e4f8..cb2773b26595 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225.h +++ b/drivers/staging/rtl8187se/r8180_rtl8225.h @@ -29,11 +29,7 @@ void rtl8225_host_usb_init(struct net_device *dev); void write_rtl8225(struct net_device *dev, u8 adr, u16 data); void RF_WriteReg(struct net_device *dev, u8 offset, u32 data); u32 RF_ReadReg(struct net_device *dev, u8 offset); -void rtl8225_rf_init(struct net_device *dev); void rtl8225_rf_set_chan(struct net_device *dev,short ch); -void rtl8225_rf_close(struct net_device *dev); -void rtl8225_rf_sleep(struct net_device *dev); -void rtl8225_rf_wakeup(struct net_device *dev); void rtl8180_set_mode(struct net_device *dev,int mode); void rtl8180_set_mode(struct net_device *dev,int mode); bool SetZebraRFPowerState8185(struct net_device *dev,RT_RF_POWER_STATE eRFPowerState); -- 2.20.1