From e93df705af1992dbf5956a8c80fcb9987bc595c0 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 5 May 2007 22:03:49 +0200 Subject: [PATCH] sl82c105: rework PIO support (take 2) Get rid of the 'pio_speed' member of 'ide_drive_t' that was only used by this driver by storing the PIO mode timings in the 'drive_data' instead -- this allows us to greatly simplify the process of "reloading" of the chip's timing register and do it right in sl82c150_dma_off_quietly() and to get rid of two extra arguments to config_for_pio() -- which got renamed to sl82c105_tune_pio() and now returns a PIO mode selected, with ide_config_drive_speed() call moved into the tuneproc() method, now called sl82c105_tune_drive() with the code to set drive's 'io_32bit' and 'unmask' flags in its turn moved to its proper place in the init_hwif() method. Also, while at it, rename get_timing_sl82c105() into get_pio_timings() and get rid of the code in it clamping cycle counts to 32 which was both incorrect and never executed anyway... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sl82c105.c | 99 ++++++++++++++++---------------------- include/linux/ide.h | 1 - 2 files changed, 41 insertions(+), 59 deletions(-) diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 3a8a76fc78c7..ee6dd45a9ba7 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -11,6 +11,8 @@ * Merge in Russell's HW workarounds, fix various problems * with the timing registers setup. * -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org + * + * Copyright (C) 2006-2007 MontaVista Software, Inc. */ #include @@ -47,25 +49,19 @@ #define CTRL_P0EN (1 << 0) /* - * Convert a PIO mode and cycle time to the required on/off - * times for the interface. This has protection against run-away - * timings. + * Convert a PIO mode and cycle time to the required on/off times + * for the interface. This has protection against runaway timings. */ -static unsigned int get_timing_sl82c105(ide_pio_data_t *p) +static unsigned int get_pio_timings(ide_pio_data_t *p) { - unsigned int cmd_on; - unsigned int cmd_off; + unsigned int cmd_on, cmd_off; - cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30; + cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30; cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30; - if (cmd_on > 32) - cmd_on = 32; if (cmd_on == 0) cmd_on = 1; - if (cmd_off > 32) - cmd_off = 32; if (cmd_off == 0) cmd_off = 1; @@ -73,44 +69,34 @@ static unsigned int get_timing_sl82c105(ide_pio_data_t *p) } /* - * Configure the drive and chipset for PIO + * Configure the chipset for PIO mode. */ -static void config_for_pio(ide_drive_t *drive, int pio, int report, int chipset_only) +static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *dev = HWIF(drive)->pci_dev; + int reg = 0x44 + drive->dn * 4; ide_pio_data_t p; - u16 drv_ctrl = 0x909; - unsigned int xfer_mode, reg; + u16 drv_ctrl; - DBG(("config_for_pio(drive:%s, pio:%d, report:%d, chipset_only:%d)\n", - drive->name, pio, report, chipset_only)); - - reg = (hwif->channel ? 0x4c : 0x44) + (drive->select.b.unit ? 4 : 0); + DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio)); pio = ide_get_best_pio_mode(drive, pio, 5, &p); - xfer_mode = XFER_PIO_0 + pio; + drive->drive_data = drv_ctrl = get_pio_timings(&p); - if (chipset_only || ide_config_drive_speed(drive, xfer_mode) == 0) { - drv_ctrl = get_timing_sl82c105(&p); - drive->pio_speed = xfer_mode; - } else - drive->pio_speed = XFER_PIO_0; - - if (drive->using_dma == 0) { + if (!drive->using_dma) { /* * If we are actually using MW DMA, then we can not * reprogram the interface drive control register. */ - pci_write_config_word(dev, reg, drv_ctrl); - pci_read_config_word(dev, reg, &drv_ctrl); - - if (report) { - printk("%s: selected %s (%dns) (%04X)\n", drive->name, - ide_xfer_verbose(xfer_mode), p.cycle_time, drv_ctrl); - } + pci_write_config_word(dev, reg, drv_ctrl); + pci_read_config_word (dev, reg, &drv_ctrl); } + + printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name, + ide_xfer_verbose(pio + XFER_PIO_0), p.cycle_time, drv_ctrl); + + return pio; } /* @@ -267,14 +253,14 @@ static int sl82c105_ide_dma_on (ide_drive_t *drive) static void sl82c105_dma_off_quietly(ide_drive_t *drive) { - u8 speed = XFER_PIO_0; + struct pci_dev *dev = HWIF(drive)->pci_dev; + int reg = 0x44 + drive->dn * 4; DBG(("sl82c105_dma_off_quietly(drive:%s)\n", drive->name)); + pci_write_config_word(dev, reg, drive->drive_data); + ide_dma_off_quietly(drive); - if (drive->pio_speed) - speed = drive->pio_speed - XFER_PIO_0; - config_for_pio(drive, speed, 0, 1); } /* @@ -323,18 +309,12 @@ static void sl82c105_resetproc(ide_drive_t *drive) * We only deal with PIO mode here - DMA mode 'using_dma' is not * initialised at the point that this function is called. */ -static void tune_sl82c105(ide_drive_t *drive, u8 pio) +static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio) { - DBG(("tune_sl82c105(drive:%s)\n", drive->name)); + DBG(("sl82c105_tune_drive(drive:%s, pio:%u)\n", drive->name, pio)); - config_for_pio(drive, pio, 1, 0); - - /* - * We support 32-bit I/O on this interface, and it - * doesn't have problems with interrupts. - */ - drive->io_32bit = 1; - drive->unmask = 1; + pio = sl82c105_tune_pio(drive, pio); + (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio); } /* @@ -401,19 +381,22 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); - hwif->tuneproc = tune_sl82c105; - hwif->selectproc = sl82c105_selectproc; - hwif->resetproc = sl82c105_resetproc; + hwif->tuneproc = &sl82c105_tune_drive; + hwif->selectproc = &sl82c105_selectproc; + hwif->resetproc = &sl82c105_resetproc; + + /* + * We support 32-bit I/O on this interface, and + * it doesn't have problems with interrupts. + */ + hwif->drives[0].io_32bit = hwif->drives[1].io_32bit = 1; + hwif->drives[0].unmask = hwif->drives[1].unmask = 1; /* - * Default to PIO 0 for fallback unless tuned otherwise. * We always autotune PIO, this is done before DMA is checked, * so there's no risk of accidentally disabling DMA */ - hwif->drives[0].pio_speed = XFER_PIO_0; - hwif->drives[0].autotune = 1; - hwif->drives[1].pio_speed = XFER_PIO_0; - hwif->drives[1].autotune = 1; + hwif->drives[0].autotune = hwif->drives[1].autotune = 1; hwif->atapi_dma = 0; hwif->mwdma_mask = 0; diff --git a/include/linux/ide.h b/include/linux/ide.h index d3bbc7188b6a..418dfb5adadd 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -613,7 +613,6 @@ typedef struct ide_drive_s { u8 quirk_list; /* considered quirky, set for a specific host */ u8 init_speed; /* transfer rate set at boot */ - u8 pio_speed; /* unused by core, used by some drivers for fallback from DMA */ u8 current_speed; /* current transfer rate set */ u8 desired_speed; /* desired transfer rate set */ u8 dn; /* now wide spread use */ -- 2.20.1