From e92df2820d2d8de4be3dcbad96eb144ce6fd550d Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Thu, 25 Dec 2008 18:08:59 -0800 Subject: [PATCH] myri10ge: update firmware headers to 1.4.37 Update myri10ge firmware headers to 1.4.37: * Make each member of the error/cmd enum an initialized one, so there is a convenient numerical reference to look for reverse conversion. * Add new MXGEFW_CMD_RELAX_RXBUFFER_ALIGNMENT command. * Add new "features" field to mcp_header. Signed-off-by: Brice Goglin Signed-off-by: David S. Miller --- drivers/net/myri10ge/myri10ge_mcp.h | 175 +++++++++--------- .../net/myri10ge/myri10ge_mcp_gen_header.h | 1 + 2 files changed, 93 insertions(+), 83 deletions(-) diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h index 99372109077..11be150e4d6 100644 --- a/drivers/net/myri10ge/myri10ge_mcp.h +++ b/drivers/net/myri10ge/myri10ge_mcp.h @@ -111,61 +111,61 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_NONE = 0, /* Reset the mcp, it is left in a safe state, waiting * for the driver to set all its parameters */ - MXGEFW_CMD_RESET, + MXGEFW_CMD_RESET = 1, /* get the version number of the current firmware.. * (may be available in the eeprom strings..? */ - MXGEFW_GET_MCP_VERSION, + MXGEFW_GET_MCP_VERSION = 2, /* Parameters which must be set by the driver before it can * issue MXGEFW_CMD_ETHERNET_UP. They persist until the next * MXGEFW_CMD_RESET is issued */ - MXGEFW_CMD_SET_INTRQ_DMA, + MXGEFW_CMD_SET_INTRQ_DMA = 3, /* data0 = LSW of the host address * data1 = MSW of the host address * data2 = slice number if multiple slices are used */ - MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */ - MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */ + MXGEFW_CMD_SET_BIG_BUFFER_SIZE = 4, /* in bytes, power of 2 */ + MXGEFW_CMD_SET_SMALL_BUFFER_SIZE = 5, /* in bytes */ /* Parameters which refer to lanai SRAM addresses where the * driver must issue PIO writes for various things */ - MXGEFW_CMD_GET_SEND_OFFSET, - MXGEFW_CMD_GET_SMALL_RX_OFFSET, - MXGEFW_CMD_GET_BIG_RX_OFFSET, + MXGEFW_CMD_GET_SEND_OFFSET = 6, + MXGEFW_CMD_GET_SMALL_RX_OFFSET = 7, + MXGEFW_CMD_GET_BIG_RX_OFFSET = 8, /* data0 = slice number if multiple slices are used */ - MXGEFW_CMD_GET_IRQ_ACK_OFFSET, - MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET, + MXGEFW_CMD_GET_IRQ_ACK_OFFSET = 9, + MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET = 10, /* Parameters which refer to rings stored on the MCP, * and whose size is controlled by the mcp */ - MXGEFW_CMD_GET_SEND_RING_SIZE, /* in bytes */ - MXGEFW_CMD_GET_RX_RING_SIZE, /* in bytes */ + MXGEFW_CMD_GET_SEND_RING_SIZE = 11, /* in bytes */ + MXGEFW_CMD_GET_RX_RING_SIZE = 12, /* in bytes */ /* Parameters which refer to rings stored in the host, * and whose size is controlled by the host. Note that * all must be physically contiguous and must contain * a power of 2 number of entries. */ - MXGEFW_CMD_SET_INTRQ_SIZE, /* in bytes */ + MXGEFW_CMD_SET_INTRQ_SIZE = 13, /* in bytes */ #define MXGEFW_CMD_SET_INTRQ_SIZE_FLAG_NO_STRICT_SIZE_CHECK (1 << 31) /* command to bring ethernet interface up. Above parameters * (plus mtu & mac address) must have been exchanged prior * to issuing this command */ - MXGEFW_CMD_ETHERNET_UP, + MXGEFW_CMD_ETHERNET_UP = 14, /* command to bring ethernet interface down. No further sends * or receives may be processed until an MXGEFW_CMD_ETHERNET_UP * is issued, and all interrupt queues must be flushed prior * to ack'ing this command */ - MXGEFW_CMD_ETHERNET_DOWN, + MXGEFW_CMD_ETHERNET_DOWN = 15, /* commands the driver may issue live, without resetting * the nic. Note that increasing the mtu "live" should @@ -173,40 +173,40 @@ enum myri10ge_mcp_cmd_type { * sufficiently large to handle the new mtu. Decreasing * the mtu live is safe */ - MXGEFW_CMD_SET_MTU, - MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, /* in microseconds */ - MXGEFW_CMD_SET_STATS_INTERVAL, /* in microseconds */ - MXGEFW_CMD_SET_STATS_DMA_OBSOLETE, /* replaced by SET_STATS_DMA_V2 */ + MXGEFW_CMD_SET_MTU = 16, + MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET = 17, /* in microseconds */ + MXGEFW_CMD_SET_STATS_INTERVAL = 18, /* in microseconds */ + MXGEFW_CMD_SET_STATS_DMA_OBSOLETE = 19, /* replaced by SET_STATS_DMA_V2 */ - MXGEFW_ENABLE_PROMISC, - MXGEFW_DISABLE_PROMISC, - MXGEFW_SET_MAC_ADDRESS, + MXGEFW_ENABLE_PROMISC = 20, + MXGEFW_DISABLE_PROMISC = 21, + MXGEFW_SET_MAC_ADDRESS = 22, - MXGEFW_ENABLE_FLOW_CONTROL, - MXGEFW_DISABLE_FLOW_CONTROL, + MXGEFW_ENABLE_FLOW_CONTROL = 23, + MXGEFW_DISABLE_FLOW_CONTROL = 24, /* do a DMA test * data0,data1 = DMA address * data2 = RDMA length (MSH), WDMA length (LSH) * command return data = repetitions (MSH), 0.5-ms ticks (LSH) */ - MXGEFW_DMA_TEST, + MXGEFW_DMA_TEST = 25, - MXGEFW_ENABLE_ALLMULTI, - MXGEFW_DISABLE_ALLMULTI, + MXGEFW_ENABLE_ALLMULTI = 26, + MXGEFW_DISABLE_ALLMULTI = 27, /* returns MXGEFW_CMD_ERROR_MULTICAST * if there is no room in the cache * data0,MSH(data1) = multicast group address */ - MXGEFW_JOIN_MULTICAST_GROUP, + MXGEFW_JOIN_MULTICAST_GROUP = 28, /* returns MXGEFW_CMD_ERROR_MULTICAST * if the address is not in the cache, * or is equal to FF-FF-FF-FF-FF-FF * data0,MSH(data1) = multicast group address */ - MXGEFW_LEAVE_MULTICAST_GROUP, - MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, + MXGEFW_LEAVE_MULTICAST_GROUP = 29, + MXGEFW_LEAVE_ALL_MULTICAST_GROUPS = 30, - MXGEFW_CMD_SET_STATS_DMA_V2, + MXGEFW_CMD_SET_STATS_DMA_V2 = 31, /* data0, data1 = bus addr, * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows * adding new stuff to mcp_irq_data without changing the ABI @@ -216,14 +216,14 @@ enum myri10ge_mcp_cmd_type { * (in the upper 16 bits). */ - MXGEFW_CMD_UNALIGNED_TEST, + MXGEFW_CMD_UNALIGNED_TEST = 32, /* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned * chipset */ - MXGEFW_CMD_UNALIGNED_STATUS, + MXGEFW_CMD_UNALIGNED_STATUS = 33, /* return data = boolean, true if the chipset is known to be unaligned */ - MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS, + MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS = 34, /* data0 = number of big buffers to use. It must be 0 or a power of 2. * 0 indicates that the NIC consumes as many buffers as they are required * for packet. This is the default behavior. @@ -233,8 +233,8 @@ enum myri10ge_mcp_cmd_type { * the NIC to be able to receive maximum-sized packets. */ - MXGEFW_CMD_GET_MAX_RSS_QUEUES, - MXGEFW_CMD_ENABLE_RSS_QUEUES, + MXGEFW_CMD_GET_MAX_RSS_QUEUES = 35, + MXGEFW_CMD_ENABLE_RSS_QUEUES = 36, /* data0 = number of slices n (0, 1, ..., n-1) to enable * data1 = interrupt mode | use of multiple transmit queues. * 0=share one INTx/MSI. @@ -249,18 +249,18 @@ enum myri10ge_mcp_cmd_type { #define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 0x1 #define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2 - MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET, - MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA, + MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET = 37, + MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA = 38, /* data0, data1 = bus address lsw, msw */ - MXGEFW_CMD_GET_RSS_TABLE_OFFSET, + MXGEFW_CMD_GET_RSS_TABLE_OFFSET = 39, /* get the offset of the indirection table */ - MXGEFW_CMD_SET_RSS_TABLE_SIZE, + MXGEFW_CMD_SET_RSS_TABLE_SIZE = 40, /* set the size of the indirection table */ - MXGEFW_CMD_GET_RSS_KEY_OFFSET, + MXGEFW_CMD_GET_RSS_KEY_OFFSET = 41, /* get the offset of the secret key */ - MXGEFW_CMD_RSS_KEY_UPDATED, + MXGEFW_CMD_RSS_KEY_UPDATED = 42, /* tell nic that the secret key's been updated */ - MXGEFW_CMD_SET_RSS_ENABLE, + MXGEFW_CMD_SET_RSS_ENABLE = 43, /* data0 = enable/disable rss * 0: disable rss. nic does not distribute receive packets. * 1: enable rss. nic distributes receive packets among queues. @@ -277,7 +277,7 @@ enum myri10ge_mcp_cmd_type { #define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5 #define MXGEFW_RSS_HASH_TYPE_MAX 0x5 - MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE, + MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE = 44, /* Return data = the max. size of the entire headers of a IPv6 TSO packet. * If the header size of a IPv6 TSO packet is larger than the specified * value, then the driver must not use TSO. @@ -286,7 +286,7 @@ enum myri10ge_mcp_cmd_type { * always has enough header buffer to store maximum-sized headers. */ - MXGEFW_CMD_SET_TSO_MODE, + MXGEFW_CMD_SET_TSO_MODE = 45, /* data0 = TSO mode. * 0: Linux/FreeBSD style (NIC default) * 1: NDIS/NetBSD style @@ -294,33 +294,37 @@ enum myri10ge_mcp_cmd_type { #define MXGEFW_TSO_MODE_LINUX 0 #define MXGEFW_TSO_MODE_NDIS 1 - MXGEFW_CMD_MDIO_READ, + MXGEFW_CMD_MDIO_READ = 46, /* data0 = dev_addr (PMA/PMD or PCS ...), data1 = register/addr */ - MXGEFW_CMD_MDIO_WRITE, + MXGEFW_CMD_MDIO_WRITE = 47, /* data0 = dev_addr, data1 = register/addr, data2 = value */ - MXGEFW_CMD_XFP_I2C_READ, - /* Starts to get a fresh copy of one byte or of the whole xfp i2c table, the + MXGEFW_CMD_I2C_READ = 48, + /* Starts to get a fresh copy of one byte or of the module i2c table, the * obtained data is cached inside the xaui-xfi chip : - * data0 : "all" flag : 0 => get one byte, 1=> get 256 bytes, - * data1 : if (data0 == 0): index of byte to refresh [ not used otherwise ] + * data0 : 0 => get one byte, 1=> get 256 bytes + * data1 : If data0 == 0: location to refresh + * bit 7:0 register location + * bit 8:15 is the i2c slave addr (0 is interpreted as 0xA1) + * bit 23:16 is the i2c bus number (for multi-port NICs) + * If data0 == 1: unused * The operation might take ~1ms for a single byte or ~65ms when refreshing all 256 bytes - * During the i2c operation, MXGEFW_CMD_XFP_I2C_READ or MXGEFW_CMD_XFP_BYTE attempts + * During the i2c operation, MXGEFW_CMD_I2C_READ or MXGEFW_CMD_I2C_BYTE attempts * will return MXGEFW_CMD_ERROR_BUSY */ - MXGEFW_CMD_XFP_BYTE, + MXGEFW_CMD_I2C_BYTE = 49, /* Return the last obtained copy of a given byte in the xfp i2c table - * (copy cached during the last relevant MXGEFW_CMD_XFP_I2C_READ) + * (copy cached during the last relevant MXGEFW_CMD_I2C_READ) * data0 : index of the desired table entry * Return data = the byte stored at the requested index in the table */ - MXGEFW_CMD_GET_VPUMP_OFFSET, + MXGEFW_CMD_GET_VPUMP_OFFSET = 50, /* Return data = NIC memory offset of mcp_vpump_public_global */ - MXGEFW_CMD_RESET_VPUMP, + MXGEFW_CMD_RESET_VPUMP = 51, /* Resets the VPUMP state */ - MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, + MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE = 52, /* data0 = mcp_slot type to use. * 0 = the default 4B mcp_slot * 1 = 8B mcp_slot_8 @@ -328,7 +332,7 @@ enum myri10ge_mcp_cmd_type { #define MXGEFW_RSS_MCP_SLOT_TYPE_MIN 0 #define MXGEFW_RSS_MCP_SLOT_TYPE_WITH_HASH 1 - MXGEFW_CMD_SET_THROTTLE_FACTOR, + MXGEFW_CMD_SET_THROTTLE_FACTOR = 53, /* set the throttle factor for ethp_z8e * data0 = throttle_factor * throttle_factor = 256 * pcie-raw-speed / tx_speed @@ -344,45 +348,50 @@ enum myri10ge_mcp_cmd_type { * with tx_boundary == 4096, max-throttle-factor == 4095 => min-speed == 1Gb/s */ - MXGEFW_CMD_VPUMP_UP, + MXGEFW_CMD_VPUMP_UP = 54, /* Allocates VPump Connection, Send Request and Zero copy buffer address tables */ - MXGEFW_CMD_GET_VPUMP_CLK, + MXGEFW_CMD_GET_VPUMP_CLK = 55, /* Get the lanai clock */ - MXGEFW_CMD_GET_DCA_OFFSET, + MXGEFW_CMD_GET_DCA_OFFSET = 56, /* offset of dca control for WDMAs */ /* VMWare NetQueue commands */ - MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE, - MXGEFW_CMD_NETQ_ADD_FILTER, + MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE = 57, + MXGEFW_CMD_NETQ_ADD_FILTER = 58, /* data0 = filter_id << 16 | queue << 8 | type */ /* data1 = MS4 of MAC Addr */ /* data2 = LS2_MAC << 16 | VLAN_tag */ - MXGEFW_CMD_NETQ_DEL_FILTER, + MXGEFW_CMD_NETQ_DEL_FILTER = 59, /* data0 = filter_id */ - MXGEFW_CMD_NETQ_QUERY1, - MXGEFW_CMD_NETQ_QUERY2, - MXGEFW_CMD_NETQ_QUERY3, - MXGEFW_CMD_NETQ_QUERY4, - + MXGEFW_CMD_NETQ_QUERY1 = 60, + MXGEFW_CMD_NETQ_QUERY2 = 61, + MXGEFW_CMD_NETQ_QUERY3 = 62, + MXGEFW_CMD_NETQ_QUERY4 = 63, + + MXGEFW_CMD_RELAX_RXBUFFER_ALIGNMENT = 64, + /* When set, small receive buffers can cross page boundaries. + * Both small and big receive buffers may start at any address. + * This option has performance implications, so use with caution. + */ }; enum myri10ge_mcp_cmd_status { MXGEFW_CMD_OK = 0, - MXGEFW_CMD_UNKNOWN, - MXGEFW_CMD_ERROR_RANGE, - MXGEFW_CMD_ERROR_BUSY, - MXGEFW_CMD_ERROR_EMPTY, - MXGEFW_CMD_ERROR_CLOSED, - MXGEFW_CMD_ERROR_HASH_ERROR, - MXGEFW_CMD_ERROR_BAD_PORT, - MXGEFW_CMD_ERROR_RESOURCES, - MXGEFW_CMD_ERROR_MULTICAST, - MXGEFW_CMD_ERROR_UNALIGNED, - MXGEFW_CMD_ERROR_NO_MDIO, - MXGEFW_CMD_ERROR_XFP_FAILURE, - MXGEFW_CMD_ERROR_XFP_ABSENT, - MXGEFW_CMD_ERROR_BAD_PCIE_LINK + MXGEFW_CMD_UNKNOWN = 1, + MXGEFW_CMD_ERROR_RANGE = 2, + MXGEFW_CMD_ERROR_BUSY = 3, + MXGEFW_CMD_ERROR_EMPTY = 4, + MXGEFW_CMD_ERROR_CLOSED = 5, + MXGEFW_CMD_ERROR_HASH_ERROR = 6, + MXGEFW_CMD_ERROR_BAD_PORT = 7, + MXGEFW_CMD_ERROR_RESOURCES = 8, + MXGEFW_CMD_ERROR_MULTICAST = 9, + MXGEFW_CMD_ERROR_UNALIGNED = 10, + MXGEFW_CMD_ERROR_NO_MDIO = 11, + MXGEFW_CMD_ERROR_I2C_FAILURE = 12, + MXGEFW_CMD_ERROR_I2C_ABSENT = 13, + MXGEFW_CMD_ERROR_BAD_PCIE_LINK = 14 }; #define MXGEFW_OLD_IRQ_DATA_LEN 40 diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h index 124bbeac512..caa6cbbb631 100644 --- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h +++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h @@ -42,6 +42,7 @@ struct mcp_gen_header { unsigned short handoff_id_caps; /* bitfield: new mcp must have superset */ unsigned msix_table_addr; /* start address of msix table in firmware */ unsigned bss_addr; /* start of bss */ + unsigned features; /* 8 */ }; -- 2.20.1