From e613cc477c777a175c89d607d1f7a8ef528d2c43 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 23 Jun 2016 14:00:58 +0300 Subject: [PATCH] mmc: sdhci: Fix sdhci_card_busy() host->card_busy() was introduced for SD voltage switching which checks all 4 data lines. Increasingly, host->card_busy is being used to poll the the busy signal which is only data line 0 (DAT[0]). The current logic in sdhci_card_busy() does not work in that case because it returns false if any of the data lines is high. It also ignores possibilities: - data lines 1-3 are not connected and could show at any level - data lines 1-2 can be used by SDIO for other purposes According to the SD specification, it is OK to check any of the data lines for voltage switching, so change to use DAT[0] only. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 040af1b6b412..702a245ce2e6 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1811,10 +1811,10 @@ static int sdhci_card_busy(struct mmc_host *mmc) struct sdhci_host *host = mmc_priv(mmc); u32 present_state; - /* Check whether DAT[3:0] is 0000 */ + /* Check whether DAT[0] is 0 */ present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); - return !(present_state & SDHCI_DATA_LVL_MASK); + return !(present_state & SDHCI_DATA_0_LVL_MASK); } static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios) -- 2.20.1