From e3227c128990deb8a9a12236fe4796a5951d0d22 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 3 Aug 2016 14:39:02 -0400 Subject: [PATCH] ARM: dts: NSP: Add new DT file for bcm958525er Create a new device tree file for the Broadcom Northstar Plus bcm958525er SVK. This SVK has 2GB RAM, 2 ports Ethernet, 2 eSATA, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future is support for the USB. Signed-off-by: Jon Mason Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm958525er.dts | 142 ++++++++++++++++++++++++++++++ 2 files changed, 143 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958525er.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index faacd52370d2..84555f4bac31 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm21664-garnet.dtb \ bcm23550-sparrow.dtb dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958525er.dtb \ bcm958525xmc.dtb \ bcm958625hr.dtb \ bcm958625k.dtb diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts new file mode 100644 index 000000000000..be7f2f8ecf39 --- /dev/null +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -0,0 +1,142 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include + +/ { + model = "NorthStar Plus SVK (BCM958525ER)"; + compatible = "brcm,bcm58525", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* USB 2/3 support needed to be complete */ + +&amac0 { + status = "okay"; +}; + + +&amac1 { + status = "okay"; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; -- 2.20.1