From e285bca6d926b17ad6343f20ef174799785e4235 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 14 Jun 2011 11:23:51 +0000 Subject: [PATCH] omap: mcbsp: Drop SPI mode support We haven't seen any use for the SPI API in McBSP driver over the years. More over, Peter Ujfalusi noticed that SPI mode is not even supported since OMAP2430 so it's very unlikely that we'll see any use for it in the future either. Signed-off-by: Jarkko Nikula Acked-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/mcbsp.h | 37 ---- arch/arm/plat-omap/mcbsp.c | 214 ------------------------ 2 files changed, 251 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index f8f690ab2997..3fc75a8fe21f 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -353,38 +353,6 @@ typedef enum { OMAP_MCBSP_WORD_32, } omap_mcbsp_word_length; -typedef enum { - OMAP_MCBSP_CLK_RISING = 0, - OMAP_MCBSP_CLK_FALLING, -} omap_mcbsp_clk_polarity; - -typedef enum { - OMAP_MCBSP_FS_ACTIVE_HIGH = 0, - OMAP_MCBSP_FS_ACTIVE_LOW, -} omap_mcbsp_fs_polarity; - -typedef enum { - OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, - OMAP_MCBSP_CLK_STP_MODE_DELAY, -} omap_mcbsp_clk_stp_mode; - - -/******* SPI specific mode **********/ -typedef enum { - OMAP_MCBSP_SPI_MASTER = 0, - OMAP_MCBSP_SPI_SLAVE, -} omap_mcbsp_spi_mode; - -struct omap_mcbsp_spi_cfg { - omap_mcbsp_spi_mode spi_mode; - omap_mcbsp_clk_polarity rx_clock_polarity; - omap_mcbsp_clk_polarity tx_clock_polarity; - omap_mcbsp_fs_polarity fsx_polarity; - u8 clk_div; - omap_mcbsp_clk_stp_mode clk_stp_mode; - omap_mcbsp_word_length word_length; -}; - /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); @@ -504,14 +472,9 @@ u32 omap_mcbsp_recv_word(unsigned int id); int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); - /* McBSP functional clock source changing function */ extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); -/* SPI specific API */ -void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); /* Polled read/write functions */ int omap_mcbsp_pollread(unsigned int id, u16 * buf); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 5587acf0eb2c..1de27243385f 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1175,147 +1175,6 @@ u32 omap_mcbsp_recv_word(unsigned int id) } EXPORT_SYMBOL(omap_mcbsp_recv_word); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) -{ - struct omap_mcbsp *mcbsp; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_word_length rx_word_length; - u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - tx_word_length = mcbsp->tx_word_length; - rx_word_length = mcbsp->rx_word_length; - - if (tx_word_length != rx_word_length) - return -EINVAL; - - /* First we wait for the transmitter to be ready */ - spcr2 = MCBSP_READ(mcbsp, SPCR2); - while (!(spcr2 & XRDY)) { - spcr2 = MCBSP_READ(mcbsp, SPCR2); - if (attempts++ > 1000) { - /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d transmitter not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Now we can push the data */ - if (tx_word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, word >> 16); - MCBSP_WRITE(mcbsp, DXR1, word & 0xffff); - - /* We wait for the receiver to be ready */ - spcr1 = MCBSP_READ(mcbsp, SPCR1); - while (!(spcr1 & RRDY)) { - spcr1 = MCBSP_READ(mcbsp, SPCR1); - if (attempts++ > 1000) { - /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d receiver not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Receiver is ready, let's read the dummy data */ - if (rx_word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); - -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) -{ - struct omap_mcbsp *mcbsp; - u32 clock_word = 0; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_word_length rx_word_length; - u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - - tx_word_length = mcbsp->tx_word_length; - rx_word_length = mcbsp->rx_word_length; - - if (tx_word_length != rx_word_length) - return -EINVAL; - - /* First we wait for the transmitter to be ready */ - spcr2 = MCBSP_READ(mcbsp, SPCR2); - while (!(spcr2 & XRDY)) { - spcr2 = MCBSP_READ(mcbsp, SPCR2); - if (attempts++ > 1000) { - /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d transmitter not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* We first need to enable the bus clock */ - if (tx_word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, clock_word >> 16); - MCBSP_WRITE(mcbsp, DXR1, clock_word & 0xffff); - - /* We wait for the receiver to be ready */ - spcr1 = MCBSP_READ(mcbsp, SPCR1); - while (!(spcr1 & RRDY)) { - spcr1 = MCBSP_READ(mcbsp, SPCR1); - if (attempts++ > 1000) { - /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d receiver not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Receiver is ready, there is something for us */ - if (rx_word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - word[0] = (word_lsb | (word_msb << 16)); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); - /* * Simple DMA based buffer rx/tx routines. * Nothing fancy, just a single buffer tx/rx through DMA. @@ -1449,79 +1308,6 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, } EXPORT_SYMBOL(omap_mcbsp_recv_buffer); -/* - * SPI wrapper. - * Since SPI setup is much simpler than the generic McBSP one, - * this wrapper just need an omap_mcbsp_spi_cfg structure as an input. - * Once this is done, you can call omap_mcbsp_start(). - */ -void omap_mcbsp_set_spi_mode(unsigned int id, - const struct omap_mcbsp_spi_cfg *spi_cfg) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_reg_cfg mcbsp_cfg; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); - - /* SPI has only one frame */ - mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0)); - mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0)); - - /* Clock stop mode */ - if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY) - mcbsp_cfg.spcr1 |= (1 << 12); - else - mcbsp_cfg.spcr1 |= (3 << 11); - - /* Set clock parities */ - if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING) - mcbsp_cfg.pcr0 |= CLKRP; - else - mcbsp_cfg.pcr0 &= ~CLKRP; - - if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING) - mcbsp_cfg.pcr0 &= ~CLKXP; - else - mcbsp_cfg.pcr0 |= CLKXP; - - /* Set SCLKME to 0 and CLKSM to 1 */ - mcbsp_cfg.pcr0 &= ~SCLKME; - mcbsp_cfg.srgr2 |= CLKSM; - - /* Set FSXP */ - if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH) - mcbsp_cfg.pcr0 &= ~FSXP; - else - mcbsp_cfg.pcr0 |= FSXP; - - if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) { - mcbsp_cfg.pcr0 |= CLKXM; - mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1); - mcbsp_cfg.pcr0 |= FSXM; - mcbsp_cfg.srgr2 &= ~FSGM; - mcbsp_cfg.xcr2 |= XDATDLY(1); - mcbsp_cfg.rcr2 |= RDATDLY(1); - } else { - mcbsp_cfg.pcr0 &= ~CLKXM; - mcbsp_cfg.srgr1 |= CLKGDV(1); - mcbsp_cfg.pcr0 &= ~FSXM; - mcbsp_cfg.xcr2 &= ~XDATDLY(3); - mcbsp_cfg.rcr2 &= ~RDATDLY(3); - } - - mcbsp_cfg.xcr2 &= ~XPHASE; - mcbsp_cfg.rcr2 &= ~RPHASE; - - omap_mcbsp_config(id, &mcbsp_cfg); -} -EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); - #ifdef CONFIG_ARCH_OMAP3 #define max_thres(m) (mcbsp->pdata->buffer_size) #define valid_threshold(m, val) ((val) <= max_thres(m)) -- 2.20.1