From e260999c66768c2fccd9da8c3918b4e0e5121b3a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 6 Sep 2010 16:48:13 +0800 Subject: [PATCH] regulator: wm831x-ldo - fix the logic to set REGULATOR_MODE_IDLE and REGULATOR_MODE_STANDBY modes Problem description in current implementation: When setting REGULATOR_MODE_IDLE mode, current implementation set WM831X_LDO1_LP_MODE bit of ctrl_reg (which is wrong, it should clear the bit). But due to a missing break statement for case REGULATOR_MODE_IDLE, the code fall through to case REGULATOR_MODE_STANDBY and then clear WM831X_LDO1_LP_MODE bit. So it still looks OK when checking the status by wm831x_gp_ldo_get_mode(). When setting REGULATOR_MODE_STANDBY mode, it just does not work. wm831x_gp_ldo_get_mode() will still return REGULATOR_MODE_IDLE because the accordingly WM831X_LDO1_LP_MODE bit is clear. Correct behavior should be: Clear WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_IDLE mode. Set WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_STANDBY mode. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-ldo.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index e686cdb61b9..9edf8f69234 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -215,8 +215,7 @@ static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev, case REGULATOR_MODE_IDLE: ret = wm831x_set_bits(wm831x, ctrl_reg, - WM831X_LDO1_LP_MODE, - WM831X_LDO1_LP_MODE); + WM831X_LDO1_LP_MODE, 0); if (ret < 0) return ret; @@ -225,10 +224,12 @@ static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev, WM831X_LDO1_ON_MODE); if (ret < 0) return ret; + break; case REGULATOR_MODE_STANDBY: ret = wm831x_set_bits(wm831x, ctrl_reg, - WM831X_LDO1_LP_MODE, 0); + WM831X_LDO1_LP_MODE, + WM831X_LDO1_LP_MODE); if (ret < 0) return ret; -- 2.20.1