From e24c745272072fd2abe55209f1949b7b7ee602a7 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Mon, 14 Dec 2009 14:20:22 -0800 Subject: [PATCH] spi: controller driver for Designware SPI core Driver for the Designware SPI core, it supports multipul interfaces like PCI/APB etc. User can use "dw_apb_ssi_db.pdf" from Synopsys as HW datasheet. [randy.dunlap@oracle.com: fix build] [akpm@linux-foundation.org: build fix] Signed-off-by: Feng Tang Cc: David Brownell Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 2 + drivers/spi/dw_spi.c | 944 +++++++++++++++++++++++++++++++++++++ drivers/spi/dw_spi_pci.c | 169 +++++++ include/linux/spi/dw_spi.h | 212 +++++++++ 5 files changed, 1337 insertions(+) create mode 100644 drivers/spi/dw_spi.c create mode 100644 drivers/spi/dw_spi_pci.c create mode 100644 include/linux/spi/dw_spi.h diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 07e5453f7b18..d7c1741c4c5b 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -292,6 +292,16 @@ config SPI_NUC900 # Add new SPI master controllers in alphabetical order above this line # +config SPI_DESIGNWARE + bool "DesignWare SPI controller core support" + depends on SPI_MASTER + help + general driver for SPI controller core from DesignWare + +config SPI_DW_PCI + tristate "PCI interface driver for DW SPI core" + depends on SPI_DESIGNWARE && PCI + # # There are lots of SPI device types, with sensors and memory # being probably the most widely used ones. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index ed8c1675b52f..a909e39f7e7c 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o +obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o +obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c new file mode 100644 index 000000000000..31620fae77be --- /dev/null +++ b/drivers/spi/dw_spi.c @@ -0,0 +1,944 @@ +/* + * dw_spi.c - Designware SPI core controller driver (refer pxa2xx_spi.c) + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include + +#include +#include + +#ifdef CONFIG_DEBUG_FS +#include +#endif + +#define START_STATE ((void *)0) +#define RUNNING_STATE ((void *)1) +#define DONE_STATE ((void *)2) +#define ERROR_STATE ((void *)-1) + +#define QUEUE_RUNNING 0 +#define QUEUE_STOPPED 1 + +#define MRST_SPI_DEASSERT 0 +#define MRST_SPI_ASSERT 1 + +/* Slave spi_dev related */ +struct chip_data { + u16 cr0; + u8 cs; /* chip select pin */ + u8 n_bytes; /* current is a 1/2/4 byte op */ + u8 tmode; /* TR/TO/RO/EEPROM */ + u8 type; /* SPI/SSP/MicroWire */ + + u8 poll_mode; /* 1 means use poll mode */ + + u32 dma_width; + u32 rx_threshold; + u32 tx_threshold; + u8 enable_dma; + u8 bits_per_word; + u16 clk_div; /* baud rate divider */ + u32 speed_hz; /* baud rate */ + int (*write)(struct dw_spi *dws); + int (*read)(struct dw_spi *dws); + void (*cs_control)(u32 command); +}; + +#ifdef CONFIG_DEBUG_FS +static int spi_show_regs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +#define SPI_REGS_BUFSIZE 1024 +static ssize_t spi_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct dw_spi *dws; + char *buf; + u32 len = 0; + ssize_t ret; + + dws = file->private_data; + + buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "MRST SPI0 registers:\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL0: \t\t0x%08x\n", dw_readl(dws, ctrl0)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL1: \t\t0x%08x\n", dw_readl(dws, ctrl1)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SSIENR: \t0x%08x\n", dw_readl(dws, ssienr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SER: \t\t0x%08x\n", dw_readl(dws, ser)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "BAUDR: \t\t0x%08x\n", dw_readl(dws, baudr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFTLR: \t0x%08x\n", dw_readl(dws, txfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFTLR: \t0x%08x\n", dw_readl(dws, rxfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFLR: \t\t0x%08x\n", dw_readl(dws, txflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFLR: \t\t0x%08x\n", dw_readl(dws, rxflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SR: \t\t0x%08x\n", dw_readl(dws, sr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "IMR: \t\t0x%08x\n", dw_readl(dws, imr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "ISR: \t\t0x%08x\n", dw_readl(dws, isr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMACR: \t\t0x%08x\n", dw_readl(dws, dmacr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMATDLR: \t0x%08x\n", dw_readl(dws, dmatdlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMARDLR: \t0x%08x\n", dw_readl(dws, dmardlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations mrst_spi_regs_ops = { + .owner = THIS_MODULE, + .open = spi_show_regs_open, + .read = spi_show_regs, +}; + +static int mrst_spi_debugfs_init(struct dw_spi *dws) +{ + dws->debugfs = debugfs_create_dir("mrst_spi", NULL); + if (!dws->debugfs) + return -ENOMEM; + + debugfs_create_file("registers", S_IFREG | S_IRUGO, + dws->debugfs, (void *)dws, &mrst_spi_regs_ops); + return 0; +} + +static void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ + if (dws->debugfs) + debugfs_remove_recursive(dws->debugfs); +} + +#else +static inline int mrst_spi_debugfs_init(struct dw_spi *dws) +{ +} + +static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void wait_till_not_busy(struct dw_spi *dws) +{ + unsigned long end = jiffies + usecs_to_jiffies(1000); + + while (time_before(jiffies, end)) { + if (!(dw_readw(dws, sr) & SR_BUSY)) + return; + } + dev_err(&dws->master->dev, + "DW SPI: Stutus keeps busy for 1000us after a read/write!\n"); +} + +static void flush(struct dw_spi *dws) +{ + while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) + dw_readw(dws, dr); + + wait_till_not_busy(dws); +} + +static void null_cs_control(u32 command) +{ +} + +static int null_writer(struct dw_spi *dws) +{ + u8 n_bytes = dws->n_bytes; + + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + dw_writew(dws, dr, 0); + dws->tx += n_bytes; + + wait_till_not_busy(dws); + return 1; +} + +static int null_reader(struct dw_spi *dws) +{ + u8 n_bytes = dws->n_bytes; + + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + dw_readw(dws, dr); + dws->rx += n_bytes; + } + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static int u8_writer(struct dw_spi *dws) +{ + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + + dw_writew(dws, dr, *(u8 *)(dws->tx)); + ++dws->tx; + + wait_till_not_busy(dws); + return 1; +} + +static int u8_reader(struct dw_spi *dws) +{ + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + *(u8 *)(dws->rx) = dw_readw(dws, dr); + ++dws->rx; + } + + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static int u16_writer(struct dw_spi *dws) +{ + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + + dw_writew(dws, dr, *(u16 *)(dws->tx)); + dws->tx += 2; + + wait_till_not_busy(dws); + return 1; +} + +static int u16_reader(struct dw_spi *dws) +{ + u16 temp; + + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + temp = dw_readw(dws, dr); + *(u16 *)(dws->rx) = temp; + dws->rx += 2; + } + + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static void *next_transfer(struct dw_spi *dws) +{ + struct spi_message *msg = dws->cur_msg; + struct spi_transfer *trans = dws->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + dws->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, + transfer_list); + return RUNNING_STATE; + } else + return DONE_STATE; +} + +/* + * Note: first step is the protocol driver prepares + * a dma-capable memory, and this func just need translate + * the virt addr to physical + */ +static int map_dma_buffers(struct dw_spi *dws) +{ + if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited + || !dws->cur_chip->enable_dma) + return 0; + + if (dws->cur_transfer->tx_dma) + dws->tx_dma = dws->cur_transfer->tx_dma; + + if (dws->cur_transfer->rx_dma) + dws->rx_dma = dws->cur_transfer->rx_dma; + + return 1; +} + +/* Caller already set message->status; dma and pio irqs are blocked */ +static void giveback(struct dw_spi *dws) +{ + struct spi_transfer *last_transfer; + unsigned long flags; + struct spi_message *msg; + + spin_lock_irqsave(&dws->lock, flags); + msg = dws->cur_msg; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->prev_chip = dws->cur_chip; + dws->cur_chip = NULL; + dws->dma_mapped = 0; + queue_work(dws->workqueue, &dws->pump_messages); + spin_unlock_irqrestore(&dws->lock, flags); + + last_transfer = list_entry(msg->transfers.prev, + struct spi_transfer, + transfer_list); + + if (!last_transfer->cs_change) + dws->cs_control(MRST_SPI_DEASSERT); + + msg->state = NULL; + if (msg->complete) + msg->complete(msg->context); +} + +static void int_error_stop(struct dw_spi *dws, const char *msg) +{ + /* Stop and reset hw */ + flush(dws); + spi_enable_chip(dws, 0); + + dev_err(&dws->master->dev, "%s\n", msg); + dws->cur_msg->state = ERROR_STATE; + tasklet_schedule(&dws->pump_transfers); +} + +static void transfer_complete(struct dw_spi *dws) +{ + /* Update total byte transfered return count actual bytes read */ + dws->cur_msg->actual_length += dws->len; + + /* Move to next transfer */ + dws->cur_msg->state = next_transfer(dws); + + /* Handle end of message */ + if (dws->cur_msg->state == DONE_STATE) { + dws->cur_msg->status = 0; + giveback(dws); + } else + tasklet_schedule(&dws->pump_transfers); +} + +static irqreturn_t interrupt_transfer(struct dw_spi *dws) +{ + u16 irq_status, irq_mask = 0x3f; + + irq_status = dw_readw(dws, isr) & irq_mask; + /* Error handling */ + if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { + dw_readw(dws, txoicr); + dw_readw(dws, rxoicr); + dw_readw(dws, rxuicr); + int_error_stop(dws, "interrupt_transfer: fifo overrun"); + return IRQ_HANDLED; + } + + /* INT comes from tx */ + if (dws->tx && (irq_status & SPI_INT_TXEI)) { + while (dws->tx < dws->tx_end) + dws->write(dws); + + if (dws->tx == dws->tx_end) { + spi_mask_intr(dws, SPI_INT_TXEI); + transfer_complete(dws); + } + } + + /* INT comes from rx */ + if (dws->rx && (irq_status & SPI_INT_RXFI)) { + if (dws->read(dws)) + transfer_complete(dws); + } + return IRQ_HANDLED; +} + +static irqreturn_t dw_spi_irq(int irq, void *dev_id) +{ + struct dw_spi *dws = dev_id; + + if (!dws->cur_msg) { + spi_mask_intr(dws, SPI_INT_TXEI); + /* Never fail */ + return IRQ_HANDLED; + } + + return dws->transfer_handler(dws); +} + +/* Must be called inside pump_transfers() */ +static void poll_transfer(struct dw_spi *dws) +{ + if (dws->tx) { + while (dws->write(dws)) + dws->read(dws); + } + + dws->read(dws); + transfer_complete(dws); +} + +static void dma_transfer(struct dw_spi *dws, int cs_change) +{ +} + +static void pump_transfers(unsigned long data) +{ + struct dw_spi *dws = (struct dw_spi *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct spi_device *spi = NULL; + struct chip_data *chip = NULL; + u8 bits = 0; + u8 imask = 0; + u8 cs_change = 0; + u16 clk_div = 0; + u32 speed = 0; + u32 cr0 = 0; + + /* Get current state information */ + message = dws->cur_msg; + transfer = dws->cur_transfer; + chip = dws->cur_chip; + spi = message->spi; + + if (message->state == ERROR_STATE) { + message->status = -EIO; + goto early_exit; + } + + /* Handle end of message */ + if (message->state == DONE_STATE) { + message->status = 0; + goto early_exit; + } + + /* Delay if requested at end of transfer*/ + if (message->state == RUNNING_STATE) { + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, + transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + } + + dws->n_bytes = chip->n_bytes; + dws->dma_width = chip->dma_width; + dws->cs_control = chip->cs_control; + + dws->rx_dma = transfer->rx_dma; + dws->tx_dma = transfer->tx_dma; + dws->tx = (void *)transfer->tx_buf; + dws->tx_end = dws->tx + transfer->len; + dws->rx = transfer->rx_buf; + dws->rx_end = dws->rx + transfer->len; + dws->write = dws->tx ? chip->write : null_writer; + dws->read = dws->rx ? chip->read : null_reader; + dws->cs_change = transfer->cs_change; + dws->len = dws->cur_transfer->len; + if (chip != dws->prev_chip) + cs_change = 1; + + cr0 = chip->cr0; + + /* Handle per transfer options for bpw and speed */ + if (transfer->speed_hz) { + speed = chip->speed_hz; + + if (transfer->speed_hz != speed) { + speed = transfer->speed_hz; + if (speed > dws->max_freq) { + printk(KERN_ERR "MRST SPI0: unsupported" + "freq: %dHz\n", speed); + message->status = -EIO; + goto early_exit; + } + + /* clk_div doesn't support odd number */ + clk_div = dws->max_freq / speed; + clk_div = (clk_div >> 1) << 1; + + chip->speed_hz = speed; + chip->clk_div = clk_div; + } + } + if (transfer->bits_per_word) { + bits = transfer->bits_per_word; + + switch (bits) { + case 8: + dws->n_bytes = 1; + dws->dma_width = 1; + dws->read = (dws->read != null_reader) ? + u8_reader : null_reader; + dws->write = (dws->write != null_writer) ? + u8_writer : null_writer; + break; + case 16: + dws->n_bytes = 2; + dws->dma_width = 2; + dws->read = (dws->read != null_reader) ? + u16_reader : null_reader; + dws->write = (dws->write != null_writer) ? + u16_writer : null_writer; + break; + default: + printk(KERN_ERR "MRST SPI0: unsupported bits:" + "%db\n", bits); + message->status = -EIO; + goto early_exit; + } + + cr0 = (bits - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + } + message->state = RUNNING_STATE; + + /* Check if current transfer is a DMA transaction */ + dws->dma_mapped = map_dma_buffers(dws); + + if (!dws->dma_mapped && !chip->poll_mode) { + if (dws->rx) + imask |= SPI_INT_RXFI; + if (dws->tx) + imask |= SPI_INT_TXEI; + dws->transfer_handler = interrupt_transfer; + } + + /* + * Reprogram registers only if + * 1. chip select changes + * 2. clk_div is changed + * 3. control value changes + */ + if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) { + spi_enable_chip(dws, 0); + + if (dw_readw(dws, ctrl0) != cr0) + dw_writew(dws, ctrl0, cr0); + + /* Set the interrupt mask, for poll mode just diable all int */ + spi_mask_intr(dws, 0xff); + if (!chip->poll_mode) + spi_umask_intr(dws, imask); + + spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); + spi_chip_sel(dws, spi->chip_select); + spi_enable_chip(dws, 1); + + if (cs_change) + dws->prev_chip = chip; + } + + if (dws->dma_mapped) + dma_transfer(dws, cs_change); + + if (chip->poll_mode) + poll_transfer(dws); + + return; + +early_exit: + giveback(dws); + return; +} + +static void pump_messages(struct work_struct *work) +{ + struct dw_spi *dws = + container_of(work, struct dw_spi, pump_messages); + unsigned long flags; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&dws->lock, flags); + if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) { + dws->busy = 0; + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (dws->cur_msg) { + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Extract head of queue */ + dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue); + list_del_init(&dws->cur_msg->queue); + + /* Initial message state*/ + dws->cur_msg->state = START_STATE; + dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, + struct spi_transfer, + transfer_list); + dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&dws->pump_transfers); + + dws->busy = 1; + spin_unlock_irqrestore(&dws->lock, flags); +} + +/* spi_device use this to queue in their spi_msg */ +static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct dw_spi *dws = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_STOPPED) { + spin_unlock_irqrestore(&dws->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + list_add_tail(&msg->queue, &dws->queue); + + if (dws->run == QUEUE_RUNNING && !dws->busy) { + + if (dws->cur_transfer || dws->cur_msg) + queue_work(dws->workqueue, + &dws->pump_messages); + else { + /* If no other data transaction in air, just go */ + spin_unlock_irqrestore(&dws->lock, flags); + pump_messages(&dws->pump_messages); + return 0; + } + } + + spin_unlock_irqrestore(&dws->lock, flags); + return 0; +} + +/* This may be called twice for each spi dev */ +static int dw_spi_setup(struct spi_device *spi) +{ + struct dw_spi_chip *chip_info = NULL; + struct chip_data *chip; + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) + return -EINVAL; + + /* Only alloc on first setup */ + chip = spi_get_ctldata(spi); + if (!chip) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->cs_control = null_cs_control; + chip->enable_dma = 0; + } + + /* + * Protocol drivers may change the chip settings, so... + * if chip_info exists, use it + */ + chip_info = spi->controller_data; + + /* chip_info doesn't always exist */ + if (chip_info) { + if (chip_info->cs_control) + chip->cs_control = chip_info->cs_control; + + chip->poll_mode = chip_info->poll_mode; + chip->type = chip_info->type; + + chip->rx_threshold = 0; + chip->tx_threshold = 0; + + chip->enable_dma = chip_info->enable_dma; + } + + if (spi->bits_per_word <= 8) { + chip->n_bytes = 1; + chip->dma_width = 1; + chip->read = u8_reader; + chip->write = u8_writer; + } else if (spi->bits_per_word <= 16) { + chip->n_bytes = 2; + chip->dma_width = 2; + chip->read = u16_reader; + chip->write = u16_writer; + } else { + /* Never take >16b case for MRST SPIC */ + dev_err(&spi->dev, "invalid wordsize\n"); + return -EINVAL; + } + chip->bits_per_word = spi->bits_per_word; + + chip->speed_hz = spi->max_speed_hz; + if (chip->speed_hz) + chip->clk_div = 25000000 / chip->speed_hz; + else + chip->clk_div = 8; /* default value */ + + chip->tmode = 0; /* Tx & Rx */ + /* Default SPI mode is SCPOL = 0, SCPH = 0 */ + chip->cr0 = (chip->bits_per_word - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + + spi_set_ctldata(spi, chip); + return 0; +} + +static void dw_spi_cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + kfree(chip); +} + +static int __init init_queue(struct dw_spi *dws) +{ + INIT_LIST_HEAD(&dws->queue); + spin_lock_init(&dws->lock); + + dws->run = QUEUE_STOPPED; + dws->busy = 0; + + tasklet_init(&dws->pump_transfers, + pump_transfers, (unsigned long)dws); + + INIT_WORK(&dws->pump_messages, pump_messages); + dws->workqueue = create_singlethread_workqueue( + dev_name(dws->master->dev.parent)); + if (dws->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static int start_queue(struct dw_spi *dws) +{ + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_RUNNING || dws->busy) { + spin_unlock_irqrestore(&dws->lock, flags); + return -EBUSY; + } + + dws->run = QUEUE_RUNNING; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->cur_chip = NULL; + dws->prev_chip = NULL; + spin_unlock_irqrestore(&dws->lock, flags); + + queue_work(dws->workqueue, &dws->pump_messages); + + return 0; +} + +static int stop_queue(struct dw_spi *dws) +{ + unsigned long flags; + unsigned limit = 50; + int status = 0; + + spin_lock_irqsave(&dws->lock, flags); + dws->run = QUEUE_STOPPED; + while (!list_empty(&dws->queue) && dws->busy && limit--) { + spin_unlock_irqrestore(&dws->lock, flags); + msleep(10); + spin_lock_irqsave(&dws->lock, flags); + } + + if (!list_empty(&dws->queue) || dws->busy) + status = -EBUSY; + spin_unlock_irqrestore(&dws->lock, flags); + + return status; +} + +static int destroy_queue(struct dw_spi *dws) +{ + int status; + + status = stop_queue(dws); + if (status != 0) + return status; + destroy_workqueue(dws->workqueue); + return 0; +} + +/* Restart the controller, disable all interrupts, clean rx fifo */ +static void spi_hw_init(struct dw_spi *dws) +{ + spi_enable_chip(dws, 0); + spi_mask_intr(dws, 0xff); + spi_enable_chip(dws, 1); + flush(dws); +} + +int __devinit dw_spi_add_host(struct dw_spi *dws) +{ + struct spi_master *master; + int ret; + + BUG_ON(dws == NULL); + + master = spi_alloc_master(dws->parent_dev, 0); + if (!master) { + ret = -ENOMEM; + goto exit; + } + + dws->master = master; + dws->type = SSI_MOTO_SPI; + dws->prev_chip = NULL; + dws->dma_inited = 0; + dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); + + ret = request_irq(dws->irq, dw_spi_irq, 0, + "dw_spi", dws); + if (ret < 0) { + dev_err(&master->dev, "can not get IRQ\n"); + goto err_free_master; + } + + master->mode_bits = SPI_CPOL | SPI_CPHA; + master->bus_num = dws->bus_num; + master->num_chipselect = dws->num_cs; + master->cleanup = dw_spi_cleanup; + master->setup = dw_spi_setup; + master->transfer = dw_spi_transfer; + + dws->dma_inited = 0; + + /* Basic HW init */ + spi_hw_init(dws); + + /* Initial and start queue */ + ret = init_queue(dws); + if (ret) { + dev_err(&master->dev, "problem initializing queue\n"); + goto err_diable_hw; + } + ret = start_queue(dws); + if (ret) { + dev_err(&master->dev, "problem starting queue\n"); + goto err_diable_hw; + } + + spi_master_set_devdata(master, dws); + ret = spi_register_master(master); + if (ret) { + dev_err(&master->dev, "problem registering spi master\n"); + goto err_queue_alloc; + } + + mrst_spi_debugfs_init(dws); + return 0; + +err_queue_alloc: + destroy_queue(dws); +err_diable_hw: + spi_enable_chip(dws, 0); + free_irq(dws->irq, dws); +err_free_master: + spi_master_put(master); +exit: + return ret; +} +EXPORT_SYMBOL(dw_spi_add_host); + +void __devexit dw_spi_remove_host(struct dw_spi *dws) +{ + int status = 0; + + if (!dws) + return; + mrst_spi_debugfs_remove(dws); + + /* Remove the queue */ + status = destroy_queue(dws); + if (status != 0) + dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not " + "complete, message memory not freed\n"); + + spi_enable_chip(dws, 0); + /* Disable clk */ + spi_set_clk(dws, 0); + free_irq(dws->irq, dws); + + /* Disconnect from the SPI framework */ + spi_unregister_master(dws->master); +} + +int dw_spi_suspend_host(struct dw_spi *dws) +{ + int ret = 0; + + ret = stop_queue(dws); + if (ret) + return ret; + spi_enable_chip(dws, 0); + spi_set_clk(dws, 0); + return ret; +} +EXPORT_SYMBOL(dw_spi_suspend_host); + +int dw_spi_resume_host(struct dw_spi *dws) +{ + int ret; + + spi_hw_init(dws); + ret = start_queue(dws); + if (ret) + dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret); + return ret; +} +EXPORT_SYMBOL(dw_spi_resume_host); + +MODULE_AUTHOR("Feng Tang "); +MODULE_DESCRIPTION("Driver for DesignWare SPI controller core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c new file mode 100644 index 000000000000..34ba69161734 --- /dev/null +++ b/drivers/spi/dw_spi_pci.c @@ -0,0 +1,169 @@ +/* + * mrst_spi_pci.c - PCI interface driver for DW SPI Core + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include + +#define DRIVER_NAME "dw_spi_pci" + +struct dw_spi_pci { + struct pci_dev *pdev; + struct dw_spi dws; +}; + +static int __devinit spi_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dw_spi_pci *dwpci; + struct dw_spi *dws; + int pci_bar = 0; + int ret; + + printk(KERN_INFO "DW: found PCI SPI controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + dwpci = kzalloc(sizeof(struct dw_spi_pci), GFP_KERNEL); + if (!dwpci) { + ret = -ENOMEM; + goto err_disable; + } + + dwpci->pdev = pdev; + dws = &dwpci->dws; + + /* Get basic io resource and map it */ + dws->paddr = pci_resource_start(pdev, pci_bar); + dws->iolen = pci_resource_len(pdev, pci_bar); + + ret = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev)); + if (ret) + goto err_kfree; + + dws->regs = ioremap_nocache((unsigned long)dws->paddr, + pci_resource_len(pdev, pci_bar)); + if (!dws->regs) { + ret = -ENOMEM; + goto err_release_reg; + } + + dws->parent_dev = &pdev->dev; + dws->bus_num = 0; + dws->num_cs = 4; + dws->max_freq = 25000000; /* for Moorestwon */ + dws->irq = pdev->irq; + + ret = dw_spi_add_host(dws); + if (ret) + goto err_unmap; + + /* PCI hook and SPI hook use the same drv data */ + pci_set_drvdata(pdev, dwpci); + return 0; + +err_unmap: + iounmap(dws->regs); +err_release_reg: + pci_release_region(pdev, pci_bar); +err_kfree: + kfree(dwpci); +err_disable: + pci_disable_device(pdev); + return ret; +} + +static void __devexit spi_pci_remove(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + + pci_set_drvdata(pdev, NULL); + iounmap(dwpci->dws.regs); + pci_release_region(pdev, 0); + kfree(dwpci); + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM +static int spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + ret = dw_spi_suspend_host(&dwpci->dws); + if (ret) + return ret; + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return ret; +} + +static int spi_resume(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + if (ret) + return ret; + return dw_spi_resume_host(&dwpci->dws); +} +#else +#define spi_suspend NULL +#define spi_resume NULL +#endif + +static const struct pci_device_id pci_ids[] __devinitdata = { + /* Intel Moorestown platform SPI controller 0 */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, + {}, +}; + +static struct pci_driver dw_spi_driver = { + .name = DRIVER_NAME, + .id_table = pci_ids, + .probe = spi_pci_probe, + .remove = __devexit_p(spi_pci_remove), + .suspend = spi_suspend, + .resume = spi_resume, +}; + +static int __init mrst_spi_init(void) +{ + return pci_register_driver(&dw_spi_driver); +} + +static void __exit mrst_spi_exit(void) +{ + pci_unregister_driver(&dw_spi_driver); +} + +module_init(mrst_spi_init); +module_exit(mrst_spi_exit); + +MODULE_AUTHOR("Feng Tang "); +MODULE_DESCRIPTION("PCI interface driver for DW SPI Core"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h new file mode 100644 index 000000000000..51b3e771a9a3 --- /dev/null +++ b/include/linux/spi/dw_spi.h @@ -0,0 +1,212 @@ +#ifndef DW_SPI_HEADER_H +#define DW_SPI_HEADER_H +#include + +/* Bit fields in CTRLR0 */ +#define SPI_DFS_OFFSET 0 + +#define SPI_FRF_OFFSET 4 +#define SPI_FRF_SPI 0x0 +#define SPI_FRF_SSP 0x1 +#define SPI_FRF_MICROWIRE 0x2 +#define SPI_FRF_RESV 0x3 + +#define SPI_MODE_OFFSET 6 +#define SPI_SCPH_OFFSET 6 +#define SPI_SCOL_OFFSET 7 +#define SPI_TMOD_OFFSET 8 +#define SPI_TMOD_TR 0x0 /* xmit & recv */ +#define SPI_TMOD_TO 0x1 /* xmit only */ +#define SPI_TMOD_RO 0x2 /* recv only */ +#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ + +#define SPI_SLVOE_OFFSET 10 +#define SPI_SRL_OFFSET 11 +#define SPI_CFS_OFFSET 12 + +/* Bit fields in SR, 7 bits */ +#define SR_MASK 0x7f /* cover 7 bits */ +#define SR_BUSY (1 << 0) +#define SR_TF_NOT_FULL (1 << 1) +#define SR_TF_EMPT (1 << 2) +#define SR_RF_NOT_EMPT (1 << 3) +#define SR_RF_FULL (1 << 4) +#define SR_TX_ERR (1 << 5) +#define SR_DCOL (1 << 6) + +/* Bit fields in ISR, IMR, RISR, 7 bits */ +#define SPI_INT_TXEI (1 << 0) +#define SPI_INT_TXOI (1 << 1) +#define SPI_INT_RXUI (1 << 2) +#define SPI_INT_RXOI (1 << 3) +#define SPI_INT_RXFI (1 << 4) +#define SPI_INT_MSTI (1 << 5) + +/* TX RX interrupt level threshhold, max can be 256 */ +#define SPI_INT_THRESHOLD 32 + +enum dw_ssi_type { + SSI_MOTO_SPI = 0, + SSI_TI_SSP, + SSI_NS_MICROWIRE, +}; + +struct dw_spi_reg { + u32 ctrl0; + u32 ctrl1; + u32 ssienr; + u32 mwcr; + u32 ser; + u32 baudr; + u32 txfltr; + u32 rxfltr; + u32 txflr; + u32 rxflr; + u32 sr; + u32 imr; + u32 isr; + u32 risr; + u32 txoicr; + u32 rxoicr; + u32 rxuicr; + u32 msticr; + u32 icr; + u32 dmacr; + u32 dmatdlr; + u32 dmardlr; + u32 idr; + u32 version; + u32 dr; /* Currently oper as 32 bits, + though only low 16 bits matters */ +} __packed; + +struct dw_spi { + struct spi_master *master; + struct spi_device *cur_dev; + struct device *parent_dev; + enum dw_ssi_type type; + + void __iomem *regs; + unsigned long paddr; + u32 iolen; + int irq; + u32 max_freq; /* max bus freq supported */ + + u16 bus_num; + u16 num_cs; /* supported slave numbers */ + + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t lock; + struct list_head queue; + int busy; + int run; + + /* Message Transfer pump */ + struct tasklet_struct pump_transfers; + + /* Current message transfer state info */ + struct spi_message *cur_msg; + struct spi_transfer *cur_transfer; + struct chip_data *cur_chip; + struct chip_data *prev_chip; + size_t len; + void *tx; + void *tx_end; + void *rx; + void *rx_end; + int dma_mapped; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + size_t rx_map_len; + size_t tx_map_len; + u8 n_bytes; /* current is a 1/2 bytes op */ + u8 max_bits_per_word; /* maxim is 16b */ + u32 dma_width; + int cs_change; + int (*write)(struct dw_spi *dws); + int (*read)(struct dw_spi *dws); + irqreturn_t (*transfer_handler)(struct dw_spi *dws); + void (*cs_control)(u32 command); + + /* Dma info */ + int dma_inited; + struct dma_chan *txchan; + struct dma_chan *rxchan; + int txdma_done; + int rxdma_done; + u64 tx_param; + u64 rx_param; + struct device *dma_dev; + dma_addr_t dma_addr; + + /* Bus interface info */ + void *priv; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs; +#endif +}; + +#define dw_readl(dw, name) \ + __raw_readl(&(((struct dw_spi_reg *)dw->regs)->name)) +#define dw_writel(dw, name, val) \ + __raw_writel((val), &(((struct dw_spi_reg *)dw->regs)->name)) +#define dw_readw(dw, name) \ + __raw_readw(&(((struct dw_spi_reg *)dw->regs)->name)) +#define dw_writew(dw, name, val) \ + __raw_writew((val), &(((struct dw_spi_reg *)dw->regs)->name)) + +static inline void spi_enable_chip(struct dw_spi *dws, int enable) +{ + dw_writel(dws, ssienr, (enable ? 1 : 0)); +} + +static inline void spi_set_clk(struct dw_spi *dws, u16 div) +{ + dw_writel(dws, baudr, div); +} + +static inline void spi_chip_sel(struct dw_spi *dws, u16 cs) +{ + if (cs > dws->num_cs) + return; + dw_writel(dws, ser, 1 << cs); +} + +/* Disable IRQ bits */ +static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) +{ + u32 new_mask; + + new_mask = dw_readl(dws, imr) & ~mask; + dw_writel(dws, imr, new_mask); +} + +/* Enable IRQ bits */ +static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) +{ + u32 new_mask; + + new_mask = dw_readl(dws, imr) | mask; + dw_writel(dws, imr, new_mask); +} + +/* + * Each SPI slave device to work with dw_api controller should + * has such a structure claiming its working mode (PIO/DMA etc), + * which can be save in the "controller_data" member of the + * struct spi_device + */ +struct dw_spi_chip { + u8 poll_mode; /* 0 for contoller polling mode */ + u8 type; /* SPI/SSP/Micrwire */ + u8 enable_dma; + void (*cs_control)(u32 command); +}; + +extern int dw_spi_add_host(struct dw_spi *dws); +extern void dw_spi_remove_host(struct dw_spi *dws); +extern int dw_spi_suspend_host(struct dw_spi *dws); +extern int dw_spi_resume_host(struct dw_spi *dws); +#endif /* DW_SPI_HEADER_H */ -- 2.20.1