From e1accbf0543eecfdb161131208c3dfefee22d61f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 29 Jul 2013 18:56:13 -0400 Subject: [PATCH] drm/radeon: select audio dto based on encoder id for DCE3 There are two audio dtos on radeon asics that you can select between. Normally, dto0 is used for hdmi and dto1 for DP, but it seems that the dto is somehow tied to the encoders on DCE3 asics. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=67435 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/r600_hdmi.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index f48240bb8c56..b9b1139da356 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -242,9 +242,15 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) /* according to the reg specs, this should DCE3.2 only, but in * practice it seems to cover DCE3.0 as well. */ - WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); - WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); - WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */ + if (dig->dig_encoder == 0) { + WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); + WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); + WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */ + } else { + WREG32(DCCG_AUDIO_DTO1_PHASE, base_rate * 100); + WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100); + WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */ + } } else { /* according to the reg specs, this should be DCE2.0 and DCE3.0 */ WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) | -- 2.20.1