From df34e5e396e6cff3389549b27e898fdb5d140269 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 10 Aug 2009 16:33:53 -0700 Subject: [PATCH] Staging: rtl8192e: remove unused functions This removes a number of unused functions. Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192e/r8192E_core.c | 250 --------------------- drivers/staging/rtl8192e/r8192E_dm.c | 127 ----------- drivers/staging/rtl8192e/r819xE_firmware.c | 48 ---- 3 files changed, 425 deletions(-) diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c index 35797bf9931e..9a0ff9ce6944 100644 --- a/drivers/staging/rtl8192e/r8192E_core.c +++ b/drivers/staging/rtl8192e/r8192E_core.c @@ -856,25 +856,6 @@ static void rtl8192_proc_init_one(struct net_device *dev) -----------------------------MISC STUFF------------------------- *****************************************************************************/ -/* this is only for debugging */ -static void print_buffer(u32 *buffer, int len) -{ - int i; - u8 *buf =(u8*)buffer; - - printk("ASCII BUFFER DUMP (len: %x):\n",len); - - for(i=0;i ", n); - for(i=0;i<16 && n<=max;i++,n++) - printk("%2x ",read_nic_byte(dev,n)); - } - printk("\n"); -} - /**************************************************************************** ------------------------------HW STUFF--------------------------- *****************************************************************************/ @@ -1164,27 +1119,6 @@ inline u16 rtl8192_rate2rate(short rate) -static u32 rtl819xusb_rx_command_packet(struct net_device *dev, struct ieee80211_rx_stats *pstats) -{ - u32 status; - - //RT_TRACE(COMP_RECV, DBG_TRACE, ("---> RxCommandPacketHandle819xUsb()\n")); - - RT_TRACE(COMP_EVENTS, "---->rtl819xusb_rx_command_packet()\n"); - status = cmpk_message_handle_rx(dev, pstats); - if (status) - { - DMESG("rxcommandpackethandle819xusb: It is a command packet\n"); - } - else - { - //RT_TRACE(COMP_RECV, DBG_TRACE, ("RxCommandPacketHandle819xUsb: It is not a command packet\n")); - } - - //RT_TRACE(COMP_RECV, DBG_TRACE, ("<--- RxCommandPacketHandle819xUsb()\n")); - return status; -} - #if 0 void rtl8192_tx_queues_stop(struct net_device *dev) { @@ -1483,141 +1417,6 @@ static void rtl8192_net_update(struct net_device *dev) } -inline u8 rtl8192_IsWirelessBMode(u16 rate) -{ - if( ((rate <= 110) && (rate != 60) && (rate != 90)) || (rate == 220) ) - return 1; - else return 0; -} - -u16 N_DBPSOfRate(u16 DataRate); - -static u16 ComputeTxTime( - u16 FrameLength, - u16 DataRate, - u8 bManagementFrame, - u8 bShortPreamble -) -{ - u16 FrameTime; - u16 N_DBPS; - u16 Ceiling; - - if( rtl8192_IsWirelessBMode(DataRate) ) - { - if( bManagementFrame || !bShortPreamble || DataRate == 10 ) - { // long preamble - FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10))); - } - else - { // Short preamble - FrameTime = (u16)(72+24+(FrameLength*8/(DataRate/10))); - } - if( ( FrameLength*8 % (DataRate/10) ) != 0 ) //Get the Ceilling - FrameTime ++; - } else { //802.11g DSSS-OFDM PLCP length field calculation. - N_DBPS = N_DBPSOfRate(DataRate); - Ceiling = (16 + 8*FrameLength + 6) / N_DBPS - + (((16 + 8*FrameLength + 6) % N_DBPS) ? 1 : 0); - FrameTime = (u16)(16 + 4 + 4*Ceiling + 6); - } - return FrameTime; -} - -u16 N_DBPSOfRate(u16 DataRate) -{ - u16 N_DBPS = 24; - - switch(DataRate) - { - case 60: - N_DBPS = 24; - break; - - case 90: - N_DBPS = 36; - break; - - case 120: - N_DBPS = 48; - break; - - case 180: - N_DBPS = 72; - break; - - case 240: - N_DBPS = 96; - break; - - case 360: - N_DBPS = 144; - break; - - case 480: - N_DBPS = 192; - break; - - case 540: - N_DBPS = 216; - break; - - default: - break; - } - - return N_DBPS; -} - -static unsigned int txqueue2outpipe(unsigned int tx_queue) -{ - unsigned int outpipe = 0x04; - - switch (tx_queue) { - case VO_QUEUE://EP4 - outpipe = 0x04; - break; - - case VI_QUEUE://EP5 - outpipe = 0x05; - break; - - case BE_QUEUE://EP6 - outpipe = 0x06; - break; - - case BK_QUEUE://EP7 - outpipe = 0x07; - break; - - case HCCA_QUEUE://EP8 - outpipe = 0x08; - break; - - case BEACON_QUEUE://EPA - outpipe = 0x0A; - break; - - case HIGH_QUEUE://EPB - outpipe = 0x0B; - break; - - case MGNT_QUEUE://EPC - outpipe = 0x0C; - break; - - case TXCMD_QUEUE://EPD - outpipe = 0x0D; - break; - - default: - printk("Unknow queue index!\n"); - break; - } - - return outpipe; -} - void rtl819xE_tx_cmd(struct net_device *dev, struct sk_buff *skb) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -3528,10 +3327,6 @@ static short rtl8192_init(struct net_device *dev) //rtl8192_rx_enable(dev); //rtl8192_adapter_start(dev); -//#ifdef DEBUG_EPROM -// dump_eprom(dev); -//#endif - //rtl8192_dump_reg(dev); return 0; } @@ -3707,7 +3502,6 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev) //3// //3// Initialize BB before MAC //3// - //rtl8192_dump_reg(dev); RT_TRACE(COMP_INIT, "BB Config Start!\n"); rtStatus = rtl8192_BBConfig(dev); if(rtStatus != RT_STATUS_SUCCESS) @@ -3717,8 +3511,6 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev) } RT_TRACE(COMP_INIT,"BB Config Finished!\n"); - //rtl8192_dump_reg(dev); - // //3//Set Loopback mode or Normal mode //3// //2006.12.13 by emily. Note!We should not merge these two CPU_GEN register writings @@ -4790,46 +4582,6 @@ IPSLeave(struct net_device *dev) } } #endif -static void CAM_read_entry( - struct net_device *dev, - u32 iIndex -) -{ - u32 target_command=0; - u32 target_content=0; - u8 entry_i=0; - u32 ulStatus; - s32 i=100; -// printk("=======>start read CAM\n"); - for(entry_i=0;entry_i=0) - { - ulStatus = read_nic_dword(dev, RWCAM); - if(ulStatus & BIT31){ - continue; - } - else{ - break; - } - } -#endif - write_nic_dword(dev, RWCAM, target_command); - RT_TRACE(COMP_SEC,"CAM_read_entry(): WRITE A0: %x \n",target_command); - // printk("CAM_read_entry(): WRITE A0: %lx \n",target_command); - target_content = read_nic_dword(dev, RCAMO); - RT_TRACE(COMP_SEC, "CAM_read_entry(): WRITE A8: %x \n",target_content); - // printk("CAM_read_entry(): WRITE A8: %lx \n",target_content); - } - printk("\n"); -} static void rtl819x_update_rxcounts( struct r8192_priv *priv, @@ -4932,7 +4684,6 @@ extern void rtl819x_watchdog_wqcallback(struct net_device *dev) ieee->LinkDetectInfo.NumRecvDataInPeriod=0; } -// CAM_read_entry(dev,0); //check if reset the driver spin_lock_irqsave(&priv->tx_lock,flags); if(check_reset_cnt++ >= 3 && !ieee->is_roaming && (last_time != 1)) @@ -7155,7 +6906,6 @@ void setKey( struct net_device *dev, } } RT_TRACE(COMP_SEC,"=========>after set key, usconfig:%x\n", usConfig); -// CAM_read_entry(dev, 0); } // This function seems not ready! WB void CamPrintDbgReg(struct net_device* dev) diff --git a/drivers/staging/rtl8192e/r8192E_dm.c b/drivers/staging/rtl8192e/r8192E_dm.c index 99504596f528..939e4b74a903 100644 --- a/drivers/staging/rtl8192e/r8192E_dm.c +++ b/drivers/staging/rtl8192e/r8192E_dm.c @@ -2082,113 +2082,6 @@ void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type, u32 } } /* DM_ChangeDynamicInitGainThresh */ -static void dm_change_fsync_setting(struct net_device *dev, s32 DM_Type, s32 DM_Value) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - - if (DM_Type == 0) // monitor 0xc38 register - { - if(DM_Value > 1) - DM_Value = 1; - priv->framesyncMonitor = (u8)DM_Value; - //DbgPrint("pHalData->framesyncMonitor = %d", pHalData->framesyncMonitor); - } -} - -static void dm_change_rxpath_selection_setting(struct net_device *dev, s32 DM_Type, s32 DM_Value) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - prate_adaptive pRA = (prate_adaptive)&(priv->rate_adaptive); - - - if(DM_Type == 0) - { - if(DM_Value > 1) - DM_Value = 1; - DM_RxPathSelTable.Enable = (u8)DM_Value; - } - else if(DM_Type == 1) - { - if(DM_Value > 1) - DM_Value = 1; - DM_RxPathSelTable.DbgMode = (u8)DM_Value; - } - else if(DM_Type == 2) - { - if(DM_Value > 40) - DM_Value = 40; - DM_RxPathSelTable.SS_TH_low = (u8)DM_Value; - } - else if(DM_Type == 3) - { - if(DM_Value > 25) - DM_Value = 25; - DM_RxPathSelTable.diff_TH = (u8)DM_Value; - } - else if(DM_Type == 4) - { - if(DM_Value >= CCK_Rx_Version_MAX) - DM_Value = CCK_Rx_Version_1; - DM_RxPathSelTable.cck_method= (u8)DM_Value; - } - else if(DM_Type == 10) - { - if(DM_Value > 100) - DM_Value = 50; - DM_RxPathSelTable.rf_rssi[0] = (u8)DM_Value; - } - else if(DM_Type == 11) - { - if(DM_Value > 100) - DM_Value = 50; - DM_RxPathSelTable.rf_rssi[1] = (u8)DM_Value; - } - else if(DM_Type == 12) - { - if(DM_Value > 100) - DM_Value = 50; - DM_RxPathSelTable.rf_rssi[2] = (u8)DM_Value; - } - else if(DM_Type == 13) - { - if(DM_Value > 100) - DM_Value = 50; - DM_RxPathSelTable.rf_rssi[3] = (u8)DM_Value; - } - else if(DM_Type == 20) - { - if(DM_Value > 1) - DM_Value = 1; - pRA->ping_rssi_enable = (u8)DM_Value; - } - else if(DM_Type == 21) - { - if(DM_Value > 30) - DM_Value = 30; - pRA->ping_rssi_thresh_for_ra = DM_Value; - } -} - -#if 0 -void dm_force_tx_fw_info(struct net_device *dev, u32 force_type, u32 force_value) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - - if (force_type == 0) // don't force TxSC - { - //DbgPrint("Set Force SubCarrier Off\n"); - priv->tx_fwinfo_force_subcarriermode = 0; - } - else if(force_type == 1) //force - { - //DbgPrint("Set Force SubCarrier On\n"); - priv->tx_fwinfo_force_subcarriermode = 1; - if(force_value > 3) - force_value = 3; - priv->tx_fwinfo_force_subcarrierval = (u8)force_value; - } -} -#endif /*----------------------------------------------------------------------------- * Function: dm_dig_init() @@ -2941,26 +2834,6 @@ dm_CheckEdcaTurbo_EXIT: } // dm_CheckEdcaTurbo #endif -static void DM_CTSToSelfSetting(struct net_device *dev, u32 DM_Type, u32 DM_Value) -{ - struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev); - - if (DM_Type == 0) // CTS to self disable/enable - { - if(DM_Value > 1) - DM_Value = 1; - priv->ieee80211->bCTSToSelfEnable = (bool)DM_Value; - //DbgPrint("pMgntInfo->bCTSToSelfEnable = %d\n", pMgntInfo->bCTSToSelfEnable); - } - else if(DM_Type == 1) //CTS to self Th - { - if(DM_Value >= 50) - DM_Value = 50; - priv->ieee80211->CTSToSelfTH = (u8)DM_Value; - //DbgPrint("pMgntInfo->CTSToSelfTH = %d\n", pMgntInfo->CTSToSelfTH); - } -} - static void dm_init_ctstoself(struct net_device * dev) { struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev); diff --git a/drivers/staging/rtl8192e/r819xE_firmware.c b/drivers/staging/rtl8192e/r819xE_firmware.c index 01ea5a1f92e3..c42b83e51e45 100644 --- a/drivers/staging/rtl8192e/r819xE_firmware.c +++ b/drivers/staging/rtl8192e/r819xE_firmware.c @@ -107,45 +107,6 @@ cmdsend_downloadcode_fail: #endif } -static bool -fwSendNullPacket( - struct net_device *dev, - u32 Length -) -{ - bool rtStatus = true; - struct r8192_priv *priv = ieee80211_priv(dev); - struct sk_buff *skb; - cb_desc *tcb_desc; - unsigned char *ptr_buf; - bool bLastInitPacket = false; - - //PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK); - - //Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ) - skb = dev_alloc_skb(Length+ 4); - memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev)); - tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE); - tcb_desc->queue_index = TXCMD_QUEUE; - tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT; - tcb_desc->bLastIniPkt = bLastInitPacket; - ptr_buf = skb_put(skb, Length); - memset(ptr_buf,0,Length); - tcb_desc->txbuf_size= (u16)Length; - - if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)|| - (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\ - (priv->ieee80211->queue_stop) ) { - RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n"); - skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb); - } else { - priv->ieee80211->softmac_hard_start_xmit(skb,dev); - } - - //PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK); - return rtStatus; -} - //----------------------------------------------------------------------------- // Procedure: Check whether main code is download OK. If OK, turn on CPU // @@ -396,15 +357,6 @@ bool init_firmware(struct net_device *dev) * will set polling bit when firmware code is also configured */ pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE; -#ifdef RTL8190P - // To initialize IMEM, CPU move code from 0x80000080, hence, we send 0x80 byte packet - rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET); - if(rt_status != true) - { - RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n"); - goto download_firmware_fail; - } -#endif //mdelay(1000); /* * To initialize IMEM, CPU move code from 0x80000080, -- 2.20.1