From de03cd716ba7b8103ef9bef425be1ac72b81aeca Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 19 Nov 2011 16:02:53 +0100 Subject: [PATCH] mtd: docg3: add erase functions Add erase capability to the docg3 driver. The erase block is made of 2 physical blocks, as both share all 64 pages. That makes an erase block of at least 64 kBytes. Signed-off-by: Robert Jarzmik Reviewed-by: Ivan Djelic Reviewed-by: Mike Dunn Signed-off-by: David Woodhouse --- drivers/mtd/devices/docg3.c | 90 +++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index fd4d47bdeec..3087b1564a4 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -1032,6 +1032,96 @@ out: return ret; } +/** + * doc_erase_block - Erase a couple of blocks + * @docg3: the device + * @block0: the first block to erase (leftmost plane) + * @block1: the second block to erase (rightmost plane) + * + * Erase both blocks, and return operation status + * + * Returns 0 if erase successful, -EIO if erase issue, -ETIMEOUT if chip not + * ready for too long + */ +static int doc_erase_block(struct docg3 *docg3, int block0, int block1) +{ + int ret, sector; + + doc_dbg("doc_erase_block(blocks=(%d,%d))\n", block0, block1); + ret = doc_reset_seq(docg3); + if (ret) + return -EIO; + + doc_set_reliable_mode(docg3); + doc_flash_sequence(docg3, DOC_SEQ_ERASE); + + sector = block0 << DOC_ADDR_BLOCK_SHIFT; + doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR); + doc_setup_addr_sector(docg3, sector); + sector = block1 << DOC_ADDR_BLOCK_SHIFT; + doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR); + doc_setup_addr_sector(docg3, sector); + doc_delay(docg3, 1); + + doc_flash_command(docg3, DOC_CMD_ERASECYCLE2); + doc_delay(docg3, 2); + + if (is_prot_seq_error(docg3)) { + doc_err("Erase blocks %d,%d error\n", block0, block1); + return -EIO; + } + + return doc_write_erase_wait_status(docg3); +} + +/** + * doc_erase - Erase a portion of the chip + * @mtd: the device + * @info: the erase info + * + * Erase a bunch of contiguous blocks, by pairs, as a "mtd" page of 1024 is + * split into 2 pages of 512 bytes on 2 contiguous blocks. + * + * Returns 0 if erase successful, -EINVAL if adressing error, -EIO if erase + * issue + */ +static int doc_erase(struct mtd_info *mtd, struct erase_info *info) +{ + struct docg3 *docg3 = mtd->priv; + uint64_t len; + int block0, block1, page, ret, ofs = 0; + + doc_dbg("doc_erase(from=%lld, len=%lld\n", info->addr, info->len); + doc_set_device_id(docg3, docg3->device_id); + + info->state = MTD_ERASE_PENDING; + calc_block_sector(info->addr + info->len, + &block0, &block1, &page, &ofs); + ret = -EINVAL; + if (block1 > docg3->max_block || page || ofs) + goto reset_err; + + ret = 0; + calc_block_sector(info->addr, &block0, &block1, &page, &ofs); + doc_set_reliable_mode(docg3); + for (len = info->len; !ret && len > 0; len -= mtd->erasesize) { + info->state = MTD_ERASING; + ret = doc_erase_block(docg3, block0, block1); + block0 += 2; + block1 += 2; + } + + if (ret) + goto reset_err; + + info->state = MTD_ERASE_DONE; + return 0; + +reset_err: + info->state = MTD_ERASE_FAILED; + return ret; +} + /** * doc_write_page - Write a single page to the chip * @docg3: the device -- 2.20.1