From dcf5341f0150bc4c5bf37786e1198d2ff8fc2c38 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 9 Mar 2016 20:38:59 +0100 Subject: [PATCH] ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator dc1sw is an on/off only regulator and as such it cannot have constraints. This is a limitation of the kernel regulator implementation which resolves supplies on the first regulator_get(), which is done after applying constraints, and applying the constrains will fail because it calls _regulator_get_voltage() and _regulator_do_set_voltage() both of which will fail on a switch regulator when there is no supply (yet). This causes registering of all axp22x regulators to fail with the following errors: [ 1.395249] vcc-lcd: failed to get the current voltage(-22) [ 1.405131] axp20x-regulator axp20x-regulator: Failed to register dc1sw [ 1.412436] axp20x-regulator: probe of axp20x-regulator failed with error -22 This commit removes the constrains on dc1sw / vcc-lcd fixing this problem note that dcdc1 itself is contrained to the exact same values, so this does not change anything. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-q8-common.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 9d2b7e2f5975..346a49d805a7 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -125,8 +125,6 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; -- 2.20.1