From dcd07be3ffab7d20f4d498369e7526f6f4945257 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 7 Apr 2009 02:01:43 +0000 Subject: [PATCH] phylib: Add interrupt source check function to M88E1121R driver Add did_interrupt() function to check if a PHY port really caused an interrupt. This is needed in the case of shared PHY interrupt pin configuration to stop interrupt event processing for PHY ports which didn't cause an interrupt. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index e9f436ba800f..7a3ec9d39a9a 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -458,6 +458,18 @@ static int marvell_read_status(struct phy_device *phydev) return 0; } +static int m88e1121_did_interrupt(struct phy_device *phydev) +{ + int imask; + + imask = phy_read(phydev, MII_M1011_IEVENT); + + if (imask & MII_M1011_IMASK_INIT) + return 1; + + return 0; +} + static struct phy_driver marvell_drivers[] = { { .phy_id = 0x01410c60, @@ -520,6 +532,7 @@ static struct phy_driver marvell_drivers[] = { .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, + .did_interrupt = &m88e1121_did_interrupt, .driver = { .owner = THIS_MODULE }, }, { -- 2.20.1