From dc96efb72054985c0912f831da009a2da4e9f6dd Mon Sep 17 00:00:00 2001 From: Matt Schulte Date: Mon, 19 Nov 2012 09:12:04 -0600 Subject: [PATCH] Serial: Add support for new devices: Exar's XR17V35x family of multi-port PCIe UARTs Add support for new devices: Exar's XR17V35x family of multi-port PCIe UARTs. Signed-off-by: Matt Schulte Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 71 ++++++++++++++++++++++ drivers/tty/serial/8250/8250_pci.c | 96 ++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 3 + include/uapi/linux/serial_core.h | 3 +- include/uapi/linux/serial_reg.h | 6 ++ 5 files changed, 178 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 2af83a246499..3624df674a31 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -282,6 +282,15 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR, }, + [PORT_XR17V35X] = { + .name = "XR17V35X", + .fifo_size = 256, + .tx_loadsz = 256, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 | + UART_FCR_T_TRIG_11, + .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP, + }, [PORT_LPC3220] = { .name = "LPC3220", .fifo_size = 64, @@ -455,6 +464,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value) } static int serial8250_default_handle_irq(struct uart_port *port); +static int exar_handle_irq(struct uart_port *port); static void set_io_from_upio(struct uart_port *p) { @@ -574,6 +584,18 @@ EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos); */ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) { + /* + * Exar UARTs have a SLEEP register that enables or disables + * each UART to enter sleep mode separately. On the XR17V35x the + * register is accessible to each UART at the UART_EXAR_SLEEP + * offset but the UART channel may only write to the corresponding + * bit. + */ + if (p->port.type == PORT_XR17V35X) { + serial_out(p, UART_EXAR_SLEEP, 0xff); + return; + } + if (p->capabilities & UART_CAP_SLEEP) { if (p->capabilities & UART_CAP_EFR) { serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); @@ -881,6 +903,27 @@ static void autoconfig_16550a(struct uart_8250_port *up) up->port.type = PORT_16550A; up->capabilities |= UART_CAP_FIFO; + /* + * XR17V35x UARTs have an extra divisor register, DLD + * that gets enabled with when DLAB is set which will + * cause the device to incorrectly match and assign + * port type to PORT_16650. The EFR for this UART is + * found at offset 0x09. Instead check the Deice ID (DVID) + * register for a 2, 4 or 8 port UART. + */ + status1 = serial_in(up, UART_EXAR_DVID); + if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) { + if (up->port.flags & UPF_EXAR_EFR) { + DEBUG_AUTOCONF("Exar XR17V35x "); + up->port.type = PORT_XR17V35X; + up->capabilities |= UART_CAP_AFE | UART_CAP_EFR | + UART_CAP_SLEEP; + + return; + } + + } + /* * Check for presence of the EFR when DLAB is set. * Only ST16C650V1 UARTs pass this test. @@ -1515,6 +1558,30 @@ static int serial8250_default_handle_irq(struct uart_port *port) return serial8250_handle_irq(port, iir); } +/* + * These Exar UARTs have an extra interrupt indicator that could + * fire for a few unimplemented interrupts. One of which is a + * wakeup event when coming out of sleep. Put this here just + * to be on the safe side that these interrupts don't go unhandled. + */ +static int exar_handle_irq(struct uart_port *port) +{ + unsigned char int0, int1, int2, int3; + unsigned int iir = serial_port_in(port, UART_IIR); + int ret; + + ret = serial8250_handle_irq(port, iir); + + if (port->type == PORT_XR17V35X) { + int0 = serial_port_in(port, 0x80); + int1 = serial_port_in(port, 0x81); + int2 = serial_port_in(port, 0x82); + int3 = serial_port_in(port, 0x83); + } + + return ret; +} + /* * This is the serial driver's interrupt routine. * @@ -2614,6 +2681,10 @@ static void serial8250_config_port(struct uart_port *port, int flags) serial8250_release_rsa_resource(up); if (port->type == PORT_UNKNOWN) serial8250_release_std_resource(up); + + /* Fixme: probably not the best place for this */ + if (port->type == PORT_XR17V35X) + port->handle_irq = exar_handle_irq; } static int diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 97058c1d7d45..2285d3283b3b 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1164,6 +1164,39 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int +pci_xr17v35x_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(priv->dev, 0); + + port->port.flags |= UPF_EXAR_EFR; + + /* + * Setup Multipurpose Input/Output pins. + */ + if (idx == 0) { + writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/ + writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/ + writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/ + writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/ + writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/ + writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/ + writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/ + writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/ + writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/ + writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/ + writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/ + writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/ + } + iounmap(p); + + return pci_default_setup(priv, board, port, idx); +} + static int pci_wch_ch353_setup(struct serial_private *priv, const struct pciserial_board *board, @@ -1622,6 +1655,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_xr17c154_setup, }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V352, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V354, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V358, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, /* * Xircom cards */ @@ -1962,6 +2016,9 @@ enum pci_board_num_t { pbn_exar_XR17C152, pbn_exar_XR17C154, pbn_exar_XR17C158, + pbn_exar_XR17V352, + pbn_exar_XR17V354, + pbn_exar_XR17V358, pbn_exar_ibm_saturn, pbn_pasemi_1682M, pbn_ni8430_2, @@ -2580,6 +2637,30 @@ static struct pciserial_board pci_boards[] = { .base_baud = 921600, .uart_offset = 0x200, }, + [pbn_exar_XR17V352] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, + [pbn_exar_XR17V354] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, + [pbn_exar_XR17V358] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, [pbn_exar_ibm_saturn] = { .flags = FL_BASE0, .num_ports = 1, @@ -3826,6 +3907,21 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_exar_XR17C158 }, + /* + * Exar Corp. XR17V35[248] Dual/Quad/Octal PCIe UARTs + */ + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V352 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V354, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V354 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V358, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V358 }, /* * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9d36b829533a..0199a7a76fcb 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1985,6 +1985,9 @@ #define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 #define PCI_DEVICE_ID_EXAR_XR17C154 0x0154 #define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 +#define PCI_DEVICE_ID_EXAR_XR17V352 0x0352 +#define PCI_DEVICE_ID_EXAR_XR17V354 0x0354 +#define PCI_DEVICE_ID_EXAR_XR17V358 0x0358 #define PCI_VENDOR_ID_MICROGATE 0x13c0 #define PCI_DEVICE_ID_MICROGATE_USC 0x0010 diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index ebcc73f0418a..78f99d97475b 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -49,7 +49,8 @@ #define PORT_XR17D15X 21 /* Exar XR17D15x UART */ #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ -#define PORT_MAX_8250 23 /* max port ID */ +#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */ +#define PORT_MAX_8250 24 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index 5ed325e88a81..d0b47607b90b 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -367,5 +367,11 @@ #define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ #define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ +/* + * These are definitions for the XR17V35X and XR17D15X + */ +#define UART_EXAR_SLEEP 0x8b /* Sleep mode */ +#define UART_EXAR_DVID 0x8d /* Device identification */ + #endif /* _LINUX_SERIAL_REG_H */ -- 2.20.1