From db5d91eb36e1cc9d46016d1d44874376cfabf274 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Tue, 28 Feb 2006 10:32:25 -0300 Subject: [PATCH] V4L/DVB (3406): Use refactored LNBP21 and BSBE1 code Use refactored LNBP21/BSBE1 code for Technotrend/Hauppauge DVB-S rev 2.3. As a side effect, FE_ENABLE_HIGH_LNB_VOLTAGE ioctl is supported now. Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttpci/av7110.c | 114 ++++--------------------------- 1 file changed, 12 insertions(+), 102 deletions(-) diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index d982a50cdd7..914f2e34d8d 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -66,6 +66,9 @@ #include "av7110_ca.h" #include "av7110_ipack.h" +#include "bsbe1.h" +#include "lnbp21.h" + #define TS_WIDTH 376 #define TS_HEIGHT 512 #define TS_BUFLEN (TS_WIDTH*TS_HEIGHT) @@ -1672,105 +1675,6 @@ static struct stv0299_config alps_bsru6_config = { }; -static u8 alps_bsbe1_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ - 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ - 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x92, - 0xff, 0xff -}; - -static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params) -{ - int ret; - u8 data[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; - - if ((params->frequency < 950000) || (params->frequency > 2150000)) - return -EINVAL; - - div = (params->frequency + (125 - 1)) / 125; // round correctly - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; - data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; - - ret = i2c_transfer(i2c, &msg, 1); - return (ret != 1) ? -EIO : 0; -} - -static struct stv0299_config alps_bsbe1_config = { - .demod_address = 0x68, - .inittab = alps_bsbe1_inittab, - .mclk = 88000000UL, - .invert = 1, - .skip_reinit = 0, - .min_delay_ms = 100, - .set_symbol_rate = alps_bsru6_set_symbol_rate, - .pll_set = alps_bsbe1_pll_set, -}; - -static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) -{ - struct av7110* av7110 = (struct av7110*) fe->dvb->priv; - int ret; - u8 data[1]; - struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) }; - - switch(voltage) { - case SEC_VOLTAGE_OFF: - data[0] = 0x00; - break; - case SEC_VOLTAGE_13: - data[0] = 0x44; - break; - case SEC_VOLTAGE_18: - data[0] = 0x4c; - break; - default: - return -EINVAL; - }; - - ret = i2c_transfer(&av7110->i2c_adap, &msg, 1); - return (ret != 1) ? -EIO : 0; -} - - static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { struct av7110* av7110 = fe->dvb->priv; @@ -2373,9 +2277,15 @@ static int frontend_init(struct av7110 *av7110) /* ALPS BSBE1 */ av7110->fe = stv0299_attach(&alps_bsbe1_config, &av7110->i2c_adap); if (av7110->fe) { - av7110->fe->ops->set_voltage = lnbp21_set_voltage; - av7110->fe->ops->dishnetwork_send_legacy_command = NULL; - av7110->recover = dvb_s_recover; + if (lnbp21_init(av7110->fe, &av7110->i2c_adap, 0, 0)) { + printk("dvb-ttpci: LNBP21 not found!\n"); + if (av7110->fe->ops->release) + av7110->fe->ops->release(av7110->fe); + av7110->fe = NULL; + } else { + av7110->fe->ops->dishnetwork_send_legacy_command = NULL; + av7110->recover = dvb_s_recover; + } } break; } -- 2.20.1