From db21b74346d7cbbf4cca94fac6b634b3e52e9d56 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 3 Jan 2018 16:46:29 +0100 Subject: [PATCH] net: stmmac: enable EEE in MII, GMII or RGMII only [ Upstream commit 879626e3a52630316d817cbda7cec9a5446d1d82 ] Note in the databook - Section 4.4 - EEE : " The EEE feature is not supported when the MAC is configured to use the TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC supports multiple PHY interfaces, you should activate the EEE mode only when the MAC is operating with GMII, MII, or RGMII interface." Applying this restriction solves a stability issue observed on Amlogic gxl platforms operating with RMII interface and the internal PHY. Fixes: 83bf79b6bb64 ("stmmac: disable at run-time the EEE if not supported") Signed-off-by: Jerome Brunet Tested-by: Arnaud Patard Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 28c4d6fa096c..0ad12c81a9e4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -364,9 +364,15 @@ static void stmmac_eee_ctrl_timer(unsigned long arg) bool stmmac_eee_init(struct stmmac_priv *priv) { struct net_device *ndev = priv->dev; + int interface = priv->plat->interface; unsigned long flags; bool ret = false; + if ((interface != PHY_INTERFACE_MODE_MII) && + (interface != PHY_INTERFACE_MODE_GMII) && + !phy_interface_mode_is_rgmii(interface)) + goto out; + /* Using PCS we cannot dial with the phy registers at this stage * so we do not support extra feature like EEE. */ -- 2.20.1