From dad91ee478c7f39e04a33272732147b8c274bb58 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Thu, 12 Jun 2014 07:55:29 +0300 Subject: [PATCH] bnx2x: Fix link for KR with swapped polarity lane This avoids clearing the RX polarity setting in KR mode when polarity lane is swapped, as otherwise this will result in failed link. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 25 ++++++++++++++----- 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 4fef1e199366..592a8a4ec9c9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3702,7 +3702,8 @@ static void bnx2x_warpcore_restart_AN_KR(struct bnx2x_phy *phy, static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 lane, i, cl72_ctrl, an_adv = 0; + u16 lane, i, cl72_ctrl, an_adv = 0, val; + u32 wc_lane_config; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, @@ -3821,15 +3822,27 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Enable Auto-Detect to support 1G over CL37 as well */ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10); - + wc_lane_config = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + shared_hw_config.wc_lane_config)); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), &val); /* Force cl48 sync_status LOW to avoid getting stuck in CL73 * parallel-detect loop when CL73 and CL37 are enabled. */ - CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, - MDIO_AER_BLOCK_AER_REG, 0); + val |= 1 << 11; + + /* Restore Polarity settings in case it was run over by + * previous link owner + */ + if (wc_lane_config & + (SHARED_HW_CFG_RX_LANE0_POL_FLIP_ENABLED << lane)) + val |= 3 << 2; + else + val &= ~(3 << 2); bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI, 0x0800); - bnx2x_set_aer_mmd(params, phy); + MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), + val); bnx2x_disable_kr2(params, vars, phy); } -- 2.20.1