From d99015b1abbad743aa049b439c1e1dede6d0fa49 Mon Sep 17 00:00:00 2001 From: Alexander van Heukelum Date: Wed, 19 Nov 2008 01:18:11 +0100 Subject: [PATCH] x86: move entry_64.S register saving out of the macros Here is a combined patch that moves "save_args" out-of-line for the interrupt macro and moves "error_entry" mostly out-of-line for the zeroentry and errorentry macros. The save_args function becomes really straightforward and easy to understand, with the possible exception of the stack switch code, which now needs to copy the return address of to the calling function. Normal interrupts arrive with ((~vector)-0x80) on the stack, which gets adjusted in common_interrupt: : (5) addq $0xffffffffffffff80,(%rsp) /* -> ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 (5) callq ffffffff80214290 : ... An apic interrupt stub now look like this: : (5) pushq $0xffffffffffffff05 /* ~(vector) */ (4) sub $0x50,%rsp /* space for registers */ (5) callq ffffffff80211290 (5) callq ffffffff80212b8f (5) jmpq ffffffff80211f93 Similarly the exception handler register saving function becomes simpler, without the need of any parameter shuffling. The stub for an exception without errorcode looks like this: : (6) callq *0x1cad12(%rip) # ffffffff803dd448 (2) pushq $0xffffffffffffffff /* no syscall */ (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 (3) mov %rsp,%rdi /* pt_regs pointer */ (2) xor %esi,%esi /* no error code */ (5) callq ffffffff80213446 (5) jmpq ffffffff8030e460 And one for an exception with errorcode like this: : (6) callq *0x1cab92(%rip) # ffffffff803dd448 (4) sub $0x78,%rsp /* space for registers */ (5) callq ffffffff8030e3b0 (3) mov %rsp,%rdi /* pt_regs pointer */ (5) mov 0x78(%rsp),%rsi /* load error code */ (9) movq $0xffffffffffffffff,0x78(%rsp) /* no syscall */ (5) callq ffffffff80213209 (5) jmpq ffffffff8030e460 Unfortunately, this last type is more than 32 bytes. But the total space savings due to this patch is about 2500 bytes on an smp-configuration, and I think the code is clearer than it was before. The tested kernels were non-paravirt ones (i.e., without the indirect call at the top of the exception handlers). Anyhow, I tested this patch on top of a recent -tip. The machine was an 2x4-core Xeon at 2333MHz. Measured where the delays between (almost-)adjacent rdtsc instructions. The graphs show how much time is spent outside of the program as a function of the measured delay. The area under the graph represents the total time spent outside the program. Eight instances of the rdtsctest were started, each pinned to a single cpu. The histogams are added. For each kernel two measurements were done: one in mostly idle condition, the other while running "bonnie++ -f", bound to cpu 0. Each measurement took 40 minutes runtime. See the attached graphs for the results. The graphs overlap almost everywhere, but there are small differences. Signed-off-by: Alexander van Heukelum Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_64.S | 300 ++++++++++++++++++++----------------- 1 file changed, 166 insertions(+), 134 deletions(-) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index dbf06a0ef3d5..5a12432ccdf9 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -242,6 +242,78 @@ ENTRY(native_usergs_sysret64) CFI_REL_OFFSET rsp,RSP /*CFI_REL_OFFSET ss,SS*/ .endm + +/* + * initial frame state for interrupts and exceptions + */ + .macro _frame ref + CFI_STARTPROC simple + CFI_SIGNAL_FRAME + CFI_DEF_CFA rsp,SS+8-\ref + /*CFI_REL_OFFSET ss,SS-\ref*/ + CFI_REL_OFFSET rsp,RSP-\ref + /*CFI_REL_OFFSET rflags,EFLAGS-\ref*/ + /*CFI_REL_OFFSET cs,CS-\ref*/ + CFI_REL_OFFSET rip,RIP-\ref + .endm + +/* + * initial frame state for interrupts (and exceptions without error code) + */ +#define INTR_FRAME _frame RIP +/* + * initial frame state for exceptions with error code (and interrupts + * with vector already pushed) + */ +#define XCPT_FRAME _frame ORIG_RAX + +/* save partial stack frame */ +ENTRY(save_args) + XCPT_FRAME + cld + movq %rdi, 8*8+16(%rsp) + CFI_REL_OFFSET rdi, 8*8+16 + movq %rsi, 7*8+16(%rsp) + CFI_REL_OFFSET rsi, 7*8+16 + movq %rdx, 6*8+16(%rsp) + CFI_REL_OFFSET rdx, 6*8+16 + movq %rcx, 5*8+16(%rsp) + CFI_REL_OFFSET rcx, 5*8+16 + movq %rax, 4*8+16(%rsp) + CFI_REL_OFFSET rax, 4*8+16 + movq %r8, 3*8+16(%rsp) + CFI_REL_OFFSET r8, 3*8+16 + movq %r9, 2*8+16(%rsp) + CFI_REL_OFFSET r9, 2*8+16 + movq %r10, 1*8+16(%rsp) + CFI_REL_OFFSET r10, 1*8+16 + movq %r11, 0*8+16(%rsp) + CFI_REL_OFFSET r11, 0*8+16 + leaq -ARGOFFSET+16(%rsp),%rdi /* arg1 for handler */ + movq %rbp, 8(%rsp) /* push %rbp */ + leaq 8(%rsp), %rbp /* mov %rsp, %ebp */ + testl $3, CS(%rdi) + je 1f + SWAPGS + /* + * irqcount is used to check if a CPU is already on an interrupt stack + * or not. While this is essentially redundant with preempt_count it is + * a little cheaper to use a separate counter in the PDA (short of + * moving irq_enter into assembly, which would be too much work) + */ +1: incl %gs:pda_irqcount + jne 2f + pop %rax /* move return address... */ + mov %gs:pda_irqstackptr,%rsp + push %rax /* ... to the new stack */ + /* + * We entered an interrupt context - irqs are off: + */ +2: TRACE_IRQS_OFF + ret + CFI_ENDPROC +END(save_args) + /* * A newly forked process directly context switches into this. */ @@ -607,26 +679,6 @@ ENTRY(stub_rt_sigreturn) CFI_ENDPROC END(stub_rt_sigreturn) -/* - * initial frame state for interrupts and exceptions - */ - .macro _frame ref - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,SS+8-\ref - /*CFI_REL_OFFSET ss,SS-\ref*/ - CFI_REL_OFFSET rsp,RSP-\ref - /*CFI_REL_OFFSET rflags,EFLAGS-\ref*/ - /*CFI_REL_OFFSET cs,CS-\ref*/ - CFI_REL_OFFSET rip,RIP-\ref - .endm - -/* initial frame state for interrupts (and exceptions without error code) */ -#define INTR_FRAME _frame RIP -/* initial frame state for exceptions with error code (and interrupts with - vector already pushed) */ -#define XCPT_FRAME _frame ORIG_RAX - /* * Build the entry stubs and pointer table with some assembler magic. * We pack 7 stubs into a single 32-byte chunk, which will fit in a @@ -667,46 +719,19 @@ END(irq_entries_start) END(interrupt) .previous -/* +/* * Interrupt entry/exit. * * Interrupt entry points save only callee clobbered registers in fast path. - * - * Entry runs with interrupts off. - */ + * + * Entry runs with interrupts off. + */ /* 0(%rsp): ~(interrupt number) */ .macro interrupt func - cld - SAVE_ARGS - leaq -ARGOFFSET(%rsp),%rdi /* arg1 for handler */ - pushq %rbp - /* - * Save rbp twice: One is for marking the stack frame, as usual, and the - * other, to fill pt_regs properly. This is because bx comes right - * before the last saved register in that structure, and not bp. If the - * base pointer were in the place bx is today, this would not be needed. - */ - movq %rbp, -8(%rsp) - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rbp, 0 - movq %rsp,%rbp - CFI_DEF_CFA_REGISTER rbp - testl $3,CS(%rdi) - je 1f - SWAPGS - /* irqcount is used to check if a CPU is already on an interrupt - stack or not. While this is essentially redundant with preempt_count - it is a little cheaper to use a separate counter in the PDA - (short of moving irq_enter into assembly, which would be too - much work) */ -1: incl %gs:pda_irqcount - cmoveq %gs:pda_irqstackptr,%rsp - push %rbp # backlink for old unwinder - /* - * We entered an interrupt context - irqs are off: - */ - TRACE_IRQS_OFF + subq $10*8, %rsp + CFI_ADJUST_CFA_OFFSET 10*8 + call save_args call \func .endm @@ -852,6 +877,8 @@ END(common_interrupt) /* * APIC interrupts. */ + .p2align 5 + .macro apicinterrupt num,func INTR_FRAME pushq $~(\num) @@ -922,24 +949,29 @@ END(spurious_interrupt) .macro zeroentry sym INTR_FRAME PARAVIRT_ADJUST_EXCEPTION_FRAME - pushq $0 /* push error code/oldrax */ + pushq $-1 /* ORIG_RAX: no syscall to restart */ CFI_ADJUST_CFA_OFFSET 8 - pushq %rax /* push real oldrax to the rdi slot */ - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rax,0 - leaq \sym(%rip),%rax - jmp error_entry + subq $15*8,%rsp + CFI_ADJUST_CFA_OFFSET 15*8 + call error_entry + movq %rsp,%rdi /* pt_regs pointer */ + xorl %esi,%esi /* no error code */ + call \sym + jmp error_exit /* %ebx: no swapgs flag */ CFI_ENDPROC .endm .macro errorentry sym XCPT_FRAME PARAVIRT_ADJUST_EXCEPTION_FRAME - pushq %rax - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rax,0 - leaq \sym(%rip),%rax - jmp error_entry + subq $15*8,%rsp + CFI_ADJUST_CFA_OFFSET 15*8 + call error_entry + movq %rsp,%rdi /* pt_regs pointer */ + movq ORIG_RAX(%rsp),%rsi /* get error code */ + movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */ + call \sym + jmp error_exit /* %ebx: no swapgs flag */ CFI_ENDPROC .endm @@ -1043,93 +1075,93 @@ paranoid_schedule\trace: .endm /* - * Exception entry point. This expects an error code/orig_rax on the stack - * and the exception handler in %rax. + * Exception entry point. This expects an error code/orig_rax on the stack. + * returns in "no swapgs flag" in %ebx. */ KPROBE_ENTRY(error_entry) _frame RDI - CFI_REL_OFFSET rax,0 - /* rdi slot contains rax, oldrax contains error code */ + CFI_ADJUST_CFA_OFFSET 15*8 + /* oldrax contains error code */ cld - subq $14*8,%rsp - CFI_ADJUST_CFA_OFFSET (14*8) - movq %rsi,13*8(%rsp) - CFI_REL_OFFSET rsi,RSI - movq 14*8(%rsp),%rsi /* load rax from rdi slot */ - CFI_REGISTER rax,rsi - movq %rdx,12*8(%rsp) - CFI_REL_OFFSET rdx,RDX - movq %rcx,11*8(%rsp) - CFI_REL_OFFSET rcx,RCX - movq %rsi,10*8(%rsp) /* store rax */ - CFI_REL_OFFSET rax,RAX - movq %r8, 9*8(%rsp) - CFI_REL_OFFSET r8,R8 - movq %r9, 8*8(%rsp) - CFI_REL_OFFSET r9,R9 - movq %r10,7*8(%rsp) - CFI_REL_OFFSET r10,R10 - movq %r11,6*8(%rsp) - CFI_REL_OFFSET r11,R11 - movq %rbx,5*8(%rsp) - CFI_REL_OFFSET rbx,RBX - movq %rbp,4*8(%rsp) - CFI_REL_OFFSET rbp,RBP - movq %r12,3*8(%rsp) - CFI_REL_OFFSET r12,R12 - movq %r13,2*8(%rsp) - CFI_REL_OFFSET r13,R13 - movq %r14,1*8(%rsp) - CFI_REL_OFFSET r14,R14 - movq %r15,(%rsp) - CFI_REL_OFFSET r15,R15 + movq %rdi,14*8+8(%rsp) + CFI_REL_OFFSET rdi,RDI+8 + movq %rsi,13*8+8(%rsp) + CFI_REL_OFFSET rsi,RSI+8 + movq %rdx,12*8+8(%rsp) + CFI_REL_OFFSET rdx,RDX+8 + movq %rcx,11*8+8(%rsp) + CFI_REL_OFFSET rcx,RCX+8 + movq %rax,10*8+8(%rsp) + CFI_REL_OFFSET rax,RAX+8 + movq %r8, 9*8+8(%rsp) + CFI_REL_OFFSET r8,R8+8 + movq %r9, 8*8+8(%rsp) + CFI_REL_OFFSET r9,R9+8 + movq %r10,7*8+8(%rsp) + CFI_REL_OFFSET r10,R10+8 + movq %r11,6*8+8(%rsp) + CFI_REL_OFFSET r11,R11+8 + movq %rbx,5*8+8(%rsp) + CFI_REL_OFFSET rbx,RBX+8 + movq %rbp,4*8+8(%rsp) + CFI_REL_OFFSET rbp,RBP+8 + movq %r12,3*8+8(%rsp) + CFI_REL_OFFSET r12,R12+8 + movq %r13,2*8+8(%rsp) + CFI_REL_OFFSET r13,R13+8 + movq %r14,1*8+8(%rsp) + CFI_REL_OFFSET r14,R14+8 + movq %r15,0*8+8(%rsp) + CFI_REL_OFFSET r15,R15+8 xorl %ebx,%ebx - testl $3,CS(%rsp) - je error_kernelspace + testl $3,CS+8(%rsp) + je error_kernelspace error_swapgs: SWAPGS error_sti: TRACE_IRQS_OFF - movq %rdi,RDI(%rsp) - CFI_REL_OFFSET rdi,RDI - movq %rsp,%rdi - movq ORIG_RAX(%rsp),%rsi /* get error code */ - movq $-1,ORIG_RAX(%rsp) - call *%rax - /* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */ -error_exit: + ret + CFI_ENDPROC + +/* + * There are two places in the kernel that can potentially fault with + * usergs. Handle them here. The exception handlers after iret run with + * kernel gs again, so don't set the user space flag. B stepping K8s + * sometimes report an truncated RIP for IRET exceptions returning to + * compat mode. Check for these here too. + */ +error_kernelspace: + incl %ebx + leaq irq_return(%rip),%rcx + cmpq %rcx,RIP+8(%rsp) + je error_swapgs + movl %ecx,%ecx /* zero extend */ + cmpq %rcx,RIP+8(%rsp) + je error_swapgs + cmpq $gs_change,RIP+8(%rsp) + je error_swapgs + jmp error_sti +KPROBE_END(error_entry) + + +/* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */ +KPROBE_ENTRY(error_exit) + _frame R15 movl %ebx,%eax RESTORE_REST DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF GET_THREAD_INFO(%rcx) testl %eax,%eax - jne retint_kernel + jne retint_kernel LOCKDEP_SYS_EXIT_IRQ - movl TI_flags(%rcx),%edx - movl $_TIF_WORK_MASK,%edi - andl %edi,%edx - jnz retint_careful + movl TI_flags(%rcx),%edx + movl $_TIF_WORK_MASK,%edi + andl %edi,%edx + jnz retint_careful jmp retint_swapgs CFI_ENDPROC - -error_kernelspace: - incl %ebx - /* There are two places in the kernel that can potentially fault with - usergs. Handle them here. The exception handlers after - iret run with kernel gs again, so don't set the user space flag. - B stepping K8s sometimes report an truncated RIP for IRET - exceptions returning to compat mode. Check for these here too. */ - leaq irq_return(%rip),%rcx - cmpq %rcx,RIP(%rsp) - je error_swapgs - movl %ecx,%ecx /* zero extend */ - cmpq %rcx,RIP(%rsp) - je error_swapgs - cmpq $gs_change,RIP(%rsp) - je error_swapgs - jmp error_sti -KPROBE_END(error_entry) +KPROBE_END(error_exit) /* Reload gs selector with exception handling */ /* edi: new selector */ -- 2.20.1