From d8f12ab5d984761726e638a4222299a9fc516233 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 22 Apr 2008 10:49:15 -0400 Subject: [PATCH] USB: UHCI: disable remote wakeup when it's not needed This patch (as1084b) fixes the way uhci-hcd handles polling and remote wakeups for its root hubs. When remote wakeup is disabled, neither interrupts nor polling should be enabled during a root-hub suspend. Likewise, if interrupts are enabled during suspend then polling isn't needed. Furthermore the EGSM (Enter Global Suspend Mode) bit shouldn't be set in the Command register unless remote wakeup is enabled. Apparently some controllers will issue a remote-wakeup interrupt whenever EGSM is on, even if Resume-Detect interrupts are supposedly disabled. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hcd.c | 74 +++++++++++++++++++++++++++++-------- drivers/usb/host/uhci-hcd.h | 5 ++- 2 files changed, 61 insertions(+), 18 deletions(-) diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index d3e0d8aa398..3a7bfe7a887 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -234,7 +234,7 @@ static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci) return 0; } -static int remote_wakeup_is_broken(struct uhci_hcd *uhci) +static int global_suspend_mode_is_broken(struct uhci_hcd *uhci) { int port; const char *sys_info; @@ -261,27 +261,60 @@ __releases(uhci->lock) __acquires(uhci->lock) { int auto_stop; - int int_enable, egsm_enable; + int int_enable, egsm_enable, wakeup_enable; struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub; auto_stop = (new_state == UHCI_RH_AUTO_STOPPED); dev_dbg(&rhdev->dev, "%s%s\n", __func__, (auto_stop ? " (auto-stop)" : "")); - /* Enable resume-detect interrupts if they work. - * Then enter Global Suspend mode if _it_ works, still configured. + /* Start off by assuming Resume-Detect interrupts and EGSM work + * and that remote wakeups should be enabled. */ egsm_enable = USBCMD_EGSM; - uhci->working_RD = 1; + uhci->RD_enable = 1; int_enable = USBINTR_RESUME; - if (remote_wakeup_is_broken(uhci)) - egsm_enable = 0; - if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable || + wakeup_enable = 1; + + /* In auto-stop mode wakeups must always be detected, but + * Resume-Detect interrupts may be prohibited. (In the absence + * of CONFIG_PM, they are always disallowed.) + */ + if (auto_stop) { + if (!device_may_wakeup(&rhdev->dev)) + int_enable = 0; + + /* In bus-suspend mode wakeups may be disabled, but if they are + * allowed then so are Resume-Detect interrupts. + */ + } else { #ifdef CONFIG_PM - (!auto_stop && !rhdev->do_remote_wakeup) || + if (!rhdev->do_remote_wakeup) + wakeup_enable = 0; #endif - (auto_stop && !device_may_wakeup(&rhdev->dev))) - uhci->working_RD = int_enable = 0; + } + + /* EGSM causes the root hub to echo a 'K' signal (resume) out any + * port which requests a remote wakeup. According to the USB spec, + * every hub is supposed to do this. But if we are ignoring + * remote-wakeup requests anyway then there's no point to it. + * We also shouldn't enable EGSM if it's broken. + */ + if (!wakeup_enable || global_suspend_mode_is_broken(uhci)) + egsm_enable = 0; + + /* If we're ignoring wakeup events then there's no reason to + * enable Resume-Detect interrupts. We also shouldn't enable + * them if they are broken or disallowed. + * + * This logic may lead us to enabling RD but not EGSM. The UHCI + * spec foolishly says that RD works only when EGSM is on, but + * there's no harm in enabling it anyway -- perhaps some chips + * will implement it! + */ + if (!wakeup_enable || resume_detect_interrupts_are_broken(uhci) || + !int_enable) + uhci->RD_enable = int_enable = 0; outw(int_enable, uhci->io_addr + USBINTR); outw(egsm_enable | USBCMD_CF, uhci->io_addr + USBCMD); @@ -308,7 +341,11 @@ __acquires(uhci->lock) uhci->rh_state = new_state; uhci->is_stopped = UHCI_IS_STOPPED; - uhci_to_hcd(uhci)->poll_rh = !int_enable; + + /* If interrupts don't work and remote wakeup is enabled then + * the suspended root hub needs to be polled. + */ + uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable); uhci_scan_schedule(uhci); uhci_fsbr_off(uhci); @@ -344,9 +381,12 @@ __acquires(uhci->lock) * for 20 ms. */ if (uhci->rh_state == UHCI_RH_SUSPENDED) { + unsigned egsm; + + /* Keep EGSM on if it was set before */ + egsm = inw(uhci->io_addr + USBCMD) & USBCMD_EGSM; uhci->rh_state = UHCI_RH_RESUMING; - outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF, - uhci->io_addr + USBCMD); + outw(USBCMD_FGR | USBCMD_CF | egsm, uhci->io_addr + USBCMD); spin_unlock_irq(&uhci->lock); msleep(20); spin_lock_irq(&uhci->lock); @@ -801,8 +841,10 @@ static int uhci_pci_resume(struct usb_hcd *hcd) spin_unlock_irq(&uhci->lock); - if (!uhci->working_RD) { - /* Suspended root hub needs to be polled */ + /* If interrupts don't work and remote wakeup is enabled then + * the suspended root hub needs to be polled. + */ + if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) { hcd->poll_rh = 1; usb_hcd_poll_rh_status(hcd); } diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 340d6ed3e6e..7d01c5677f9 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -400,8 +400,9 @@ struct uhci_hcd { unsigned int scan_in_progress:1; /* Schedule scan is running */ unsigned int need_rescan:1; /* Redo the schedule scan */ unsigned int dead:1; /* Controller has died */ - unsigned int working_RD:1; /* Suspended root hub doesn't - need to be polled */ + unsigned int RD_enable:1; /* Suspended root hub with + Resume-Detect interrupts + enabled */ unsigned int is_initialized:1; /* Data structure is usable */ unsigned int fsbr_is_on:1; /* FSBR is turned on */ unsigned int fsbr_is_wanted:1; /* Does any URB want FSBR? */ -- 2.20.1