From d8b53bff0a499cd05a5026307af9a5f41f604ea3 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Sun, 2 Jul 2017 11:44:43 +0900 Subject: [PATCH] ALSA: pcm: add a documentation for tracepoints In PCM interface/protocol for userspace, parameters of runtime for PCM substream is decided by an interaction between applications and ALSA PCM core. In former commits, some tracepoints were added to probe a part of the interaction. This commit adds a documentation about the interaction and the tracepoints. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- Documentation/sound/designs/index.rst | 1 + Documentation/sound/designs/tracepoints.rst | 172 ++++++++++++++++++++ 2 files changed, 173 insertions(+) create mode 100644 Documentation/sound/designs/tracepoints.rst diff --git a/Documentation/sound/designs/index.rst b/Documentation/sound/designs/index.rst index 04dcdae3e4f2..f0749943ccb2 100644 --- a/Documentation/sound/designs/index.rst +++ b/Documentation/sound/designs/index.rst @@ -9,6 +9,7 @@ Designs and Implementations compress-offload timestamping jack-controls + tracepoints procfile powersave oss-emulation diff --git a/Documentation/sound/designs/tracepoints.rst b/Documentation/sound/designs/tracepoints.rst new file mode 100644 index 000000000000..78bc5572f829 --- /dev/null +++ b/Documentation/sound/designs/tracepoints.rst @@ -0,0 +1,172 @@ +=================== +Tracepoints in ALSA +=================== + +2017/07/02 +Takasahi Sakamoto + +Tracepoints in ALSA PCM core +============================ + +ALSA PCM core registers ``snd_pcm`` subsystem to kernel tracepoint system. +This subsystem includes two categories of tracepoints; for state of PCM buffer +and for processing of PCM hardware parameters. These tracepoints are available +when corresponding kernel configurations are enabled. When ``CONFIG_SND_DEBUG`` +is enabled, the latter tracepoints are available. When additional +``SND_PCM_XRUN_DEBUG`` is enabled too, the former trace points are enabled. + +Tracepoints for state of PCM buffer +------------------------------------ + +This category includes four tracepoints; ``hwptr``, ``applptr``, ``xrun`` and +``hw_ptr_error``. + +Tracepoints for processing of PCM hardware parameters +----------------------------------------------------- + +This category includes two tracepoints; ``hw_mask_param`` and +``hw_interval_param``. + +In a design of ALSA PCM core, data transmission is abstracted as PCM substream. +Applications manage PCM substream to maintain data transmission for PCM frames. +Before starting the data transmission, applications need to configure PCM +substream. In this procedure, PCM hardware parameters are decided by +interaction between applications and ALSA PCM core. Once decided, runtime of +the PCM substream keeps the parameters. + +The parameters are described in :c:type:`struct snd_pcm_hw_params`. This +structure includes several types of parameters. Applications set preferable +value to these parameters, then execute ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE +or SNDRV_PCM_IOCTL_HW_PARAMS. The former is used just for refining available +set of parameters. The latter is used for an actual decision of the parameters. + +The :c:type:`struct snd_pcm_hw_params` structure has below members: + +``flags`` + Configurable. ALSA PCM core and some drivers handle this flag to select + convenient parameters or change their behaviour. +``masks`` + Configurable. This type of parameter is described in + :c:type:`struct snd_mask` and represent mask values. As of PCM protocol + v2.0.13, three types are defined. + + - SNDRV_PCM_HW_PARAM_ACCESS + - SNDRV_PCM_HW_PARAM_FORMAT + - SNDRV_PCM_HW_PARAM_SUBFORMAT +``intervals`` + Configurable. This type of parameter is described in + :c:type:`struct snd_interval` and represent values with a range. As of + PCM protocol v2.0.13, twelve types are defined. + + - SNDRV_PCM_HW_PARAM_SAMPLE_BITS + - SNDRV_PCM_HW_PARAM_FRAME_BITS + - SNDRV_PCM_HW_PARAM_CHANNELS + - SNDRV_PCM_HW_PARAM_RATE + - SNDRV_PCM_HW_PARAM_PERIOD_TIME + - SNDRV_PCM_HW_PARAM_PERIOD_SIZE + - SNDRV_PCM_HW_PARAM_PERIOD_BYTES + - SNDRV_PCM_HW_PARAM_PERIODS + - SNDRV_PCM_HW_PARAM_BUFFER_TIME + - SNDRV_PCM_HW_PARAM_BUFFER_SIZE + - SNDRV_PCM_HW_PARAM_BUFFER_BYTES + - SNDRV_PCM_HW_PARAM_TICK_TIME +``rmask`` + Configurable. This is evaluated at ioctl(2) with + SNDRV_PCM_IOCTL_HW_REFINE only. Applications can select which + mask/interval parameter can be changed by ALSA PCM core. For + SNDRV_PCM_IOCTL_HW_PARAMS, this mask is ignored and all of parameters + are going to be changed. +``cmask`` + Read-only. After returning from ioctl(2), buffer in user space for + :c:type:`struct snd_pcm_hw_params` includes result of each operation. + This mask represents which mask/interval parameter is actually changed. +``info`` + Read-only. This represents hardware/driver capabilities as bit flags + with SNDRV_PCM_INFO_XXX. Typically, applications execute ioctl(2) with + SNDRV_PCM_IOCTL_HW_REFINE to retrieve this flag, then decide candidates + of parameters and execute ioctl(2) with SNDRV_PCM_IOCTL_HW_PARAMS to + configure PCM substream. +``msbits`` + Read-only. This value represents available bit width in MSB side of + a PCM sample. When a parameter of SNDRV_PCM_HW_PARAM_SAMPLE_BITS was + decided as a fixed number, this value is also calculated according to + it. Else, zero. But this behaviour depends on implementations in driver + side. +``rate_num`` + Read-only. This value represents numerator of sampling rate in fraction + notation. Basically, when a parameter of SNDRV_PCM_HW_PARAM_RATE was + decided as a single value, this value is also calculated according to + it. Else, zero. But this behaviour depends on implementations in driver + side. +``rate_den`` + Read-only. This value represents denominator of sampling rate in + fraction notation. Basically, when a parameter of + SNDRV_PCM_HW_PARAM_RATE was decided as a single value, this value is + also calculated according to it. Else, zero. But this behaviour depends + on implementations in driver side. +``fifo_size`` + Read-only. This value represents the size of FIFO in serial sound + interface of hardware. Basically, each driver can assigns a proper + value to this parameter but some drivers intentionally set zero with + a care of hardware design or data transmission protocol. + +ALSA PCM core handles buffer of :c:type:`struct snd_pcm_hw_params` when +applications execute ioctl(2) with SNDRV_PCM_HW_REFINE or SNDRV_PCM_HW_PARAMS. +Parameters in the buffer are changed according to +:c:type:`struct snd_pcm_hardware` and rules of constraints in the runtime. The +structure describes capabilities of handled hardware. The rules describes +dependencies on which a parameter is decided according to several parameters. +A rule has a callback function, and drivers can register arbitrary functions +to compute the target parameter. ALSA PCM core registers some rules to the +runtime as a default. + +Each driver can join in the interaction as long as it prepared for two stuffs +in a callback of :c:type:`struct snd_pcm_ops.open`. + +1. In the callback, drivers are expected to change a member of + :c:type:`struct snd_pcm_hardware` type in the runtime, according to + capacities of corresponding hardware. +2. In the same callback, drivers are also expected to register additional rules + of constraints into the runtime when several parameters have dependencies + due to hardware design. + +The driver can refers to result of the interaction in a callback of +:c:type:`struct snd_pcm_ops.hw_params`, however it should not change the +content. + +Tracepoints in this category are designed to trace changes of the +mask/interval parameters. When ALSA PCM core changes them, ``hw_mask_param`` or +``hw_interval_param`` event is probed according to type of the changed parameter. + +ALSA PCM core also has a pretty print format for each of the tracepoints. Below +is an example for ``hw_mask_param``. + +:: + + hw_mask_param: pcmC0D0p 001/023 FORMAT 00000000000000000000001000000044 00000000000000000000001000000044 + + +Below is an example for ``hw_interval_param``. + +:: + + hw_interval_param: pcmC0D0p 000/023 BUFFER_SIZE 0 0 [0 4294967295] 0 1 [0 4294967295] + +The first three fields are common. They represent name of ALSA PCM character +device, rules of constraint and name of the changed parameter, in order. The +field for rules of constraint consists of two sub-fields; index of applied rule +and total number of rules added to the runtime. As an exception, the index 000 +means that the parameter is changed by ALSA PCM core, regardless of the rules. + +The rest of field represent state of the parameter before/after changing. These +fields are different according to type of the parameter. For parameters of mask +type, the fields represent hexadecimal dump of content of the parameter. For +parameters of interval type, the fields represent values of each member of +``empty``, ``integer``, ``openmin``, ``min``, ``max``, ``openmax`` in +:c:type:`struct snd_interval` in this order. + +Tracepoints in drivers +====================== + +Some drivers have tracepoints for developers' convenience. For them, please +refer to each documentation or implementation. -- 2.20.1