From d8789b2b90aeb53ce59ac232d2ff0d8357d53893 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 May 2012 16:39:27 -0700 Subject: [PATCH] USB: serial: pl2303: convert dbg() calls to dev_dbg() This converts the usage of dbg() to dev_dbg() where needed, and removed a bunch of these calls where they were just "tracing" calls, which are no longer needed. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 83 ++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 47 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index c6bb88d5effd..9eec2c3574d8 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -159,8 +159,9 @@ static int pl2303_vendor_read(__u16 value, __u16 index, int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE, value, index, buf, 1, 100); - dbg("0x%x:0x%x:0x%x:0x%x %d - %x", VENDOR_READ_REQUEST_TYPE, - VENDOR_READ_REQUEST, value, index, res, buf[0]); + dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n", + VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, value, index, + res, buf[0]); return res; } @@ -170,8 +171,9 @@ static int pl2303_vendor_write(__u16 value, __u16 index, int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE, value, index, NULL, 0, 100); - dbg("0x%x:0x%x:0x%x:0x%x %d", VENDOR_WRITE_REQUEST_TYPE, - VENDOR_WRITE_REQUEST, value, index, res); + dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d\n", + VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, value, index, + res); return res; } @@ -194,7 +196,7 @@ static int pl2303_startup(struct usb_serial *serial) type = type_1; else if (serial->dev->descriptor.bDeviceClass == 0xFF) type = type_1; - dbg("device type: %d", type); + dev_dbg(&serial->interface->dev, "device type: %d\n", type); for (i = 0; i < serial->num_ports; ++i) { priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL); @@ -241,7 +243,8 @@ static int set_control_lines(struct usb_device *dev, u8 value) retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, value, 0, NULL, 0, 100); - dbg("%s - value = %d, retval = %d", __func__, value, retval); + dev_dbg(&dev->dev, "%s - value = %d, retval = %d\n", __func__, + value, retval); return retval; } @@ -263,8 +266,6 @@ static void pl2303_set_termios(struct tty_struct *tty, int baud_floor, baud_ceil; int k; - dbg("%s - port %d", __func__, port->number); - /* The PL2303 is reported to lose bytes if you change serial settings even to the same values as before. Thus we actually need to filter in this specific case */ @@ -285,7 +286,7 @@ static void pl2303_set_termios(struct tty_struct *tty, i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, 0, 0, buf, 7, 100); - dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, + dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CSIZE) { @@ -304,7 +305,7 @@ static void pl2303_set_termios(struct tty_struct *tty, buf[6] = 8; break; } - dbg("%s - data bits = %d", __func__, buf[6]); + dev_dbg(&port->dev, "data bits = %d\n", buf[6]); } /* For reference buf[0]:buf[3] baud rate value */ @@ -313,7 +314,7 @@ static void pl2303_set_termios(struct tty_struct *tty, * 9600 baud (at least my PL2303X always does) */ baud = tty_get_baud_rate(tty); - dbg("%s - baud requested = %d", __func__, baud); + dev_dbg(&port->dev, "baud requested = %d\n", baud); if (baud) { /* Set baudrate to nearest supported value */ for (k=0; k 6000000) baud = 6000000; } - dbg("%s - baud set = %d", __func__, baud); + dev_dbg(&port->dev, "baud set = %d\n", baud); if (baud <= 115200) { buf[0] = baud & 0xff; buf[1] = (baud >> 8) & 0xff; @@ -370,14 +371,14 @@ static void pl2303_set_termios(struct tty_struct *tty, */ if ((cflag & CSIZE) == CS5) { buf[4] = 1; - dbg("%s - stop bits = 1.5", __func__); + dev_dbg(&port->dev, "stop bits = 1.5\n"); } else { buf[4] = 2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(&port->dev, "stop bits = 2\n"); } } else { buf[4] = 0; - dbg("%s - stop bits = 1", __func__); + dev_dbg(&port->dev, "stop bits = 1\n"); } if (cflag & PARENB) { @@ -389,29 +390,29 @@ static void pl2303_set_termios(struct tty_struct *tty, if (cflag & PARODD) { if (cflag & CMSPAR) { buf[5] = 3; - dbg("%s - parity = mark", __func__); + dev_dbg(&port->dev, "parity = mark\n"); } else { buf[5] = 1; - dbg("%s - parity = odd", __func__); + dev_dbg(&port->dev, "parity = odd\n"); } } else { if (cflag & CMSPAR) { buf[5] = 4; - dbg("%s - parity = space", __func__); + dev_dbg(&port->dev, "parity = space\n"); } else { buf[5] = 2; - dbg("%s - parity = even", __func__); + dev_dbg(&port->dev, "parity = even\n"); } } } else { buf[5] = 0; - dbg("%s - parity = none", __func__); + dev_dbg(&port->dev, "parity = none\n"); } i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, 0, 0, buf, 7, 100); - dbg("0x21:0x20:0:0 %d", i); + dev_dbg(&port->dev, "0x21:0x20:0:0 %d\n", i); /* change control lines if we are switching to or from B0 */ spin_lock_irqsave(&priv->lock, flags); @@ -433,7 +434,7 @@ static void pl2303_set_termios(struct tty_struct *tty, i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, 0, 0, buf, 7, 100); - dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, + dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x\n", i, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CRTSCTS) { @@ -471,8 +472,6 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on) static void pl2303_close(struct usb_serial_port *port) { - dbg("%s - port %d", __func__, port->number); - usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); } @@ -484,8 +483,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) struct pl2303_private *priv = usb_get_serial_port_data(port); int result; - dbg("%s - port %d", __func__, port->number); - if (priv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -499,7 +496,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) if (tty) pl2303_set_termios(tty, port, &tmp_termios); - dbg("%s - submitting interrupt urb", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," @@ -558,8 +554,6 @@ static int pl2303_tiocmget(struct tty_struct *tty) unsigned int status; unsigned int result; - dbg("%s (%d)", __func__, port->number); - spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; status = priv->line_status; @@ -572,7 +566,7 @@ static int pl2303_tiocmget(struct tty_struct *tty) | ((status & UART_RING) ? TIOCM_RI : 0) | ((status & UART_DCD) ? TIOCM_CD : 0); - dbg("%s - result = %x", __func__, result); + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); return result; } @@ -626,7 +620,8 @@ static int pl2303_ioctl(struct tty_struct *tty, { struct serial_struct ser; struct usb_serial_port *port = tty->driver_data; - dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); + + dev_dbg(&port->dev, "%s cmd = 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -642,10 +637,10 @@ static int pl2303_ioctl(struct tty_struct *tty, return 0; case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); return wait_modem_info(port, arg); default: - dbg("%s not supported = 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); break; } return -ENOIOCTLCMD; @@ -658,20 +653,18 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) u16 state; int result; - dbg("%s - port %d", __func__, port->number); - if (break_state == 0) state = BREAK_OFF; else state = BREAK_ON; - dbg("%s - turning break %s", __func__, + dev_dbg(&port->dev, "%s - turning break %s\n", __func__, state == BREAK_OFF ? "off" : "on"); result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 0, NULL, 0, 100); if (result) - dbg("%s - error sending break = %d", __func__, result); + dev_err(&port->dev, "error sending break = %d\n", result); } static void pl2303_release(struct usb_serial *serial) @@ -679,8 +672,6 @@ static void pl2303_release(struct usb_serial *serial) int i; struct pl2303_private *priv; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) { priv = usb_get_serial_port_data(serial->port[i]); kfree(priv); @@ -743,8 +734,6 @@ static void pl2303_read_int_callback(struct urb *urb) int status = urb->status; int retval; - dbg("%s (%d)", __func__, port->number); - switch (status) { case 0: /* success */ @@ -753,12 +742,12 @@ static void pl2303_read_int_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); goto exit; } @@ -770,7 +759,7 @@ static void pl2303_read_int_callback(struct urb *urb) exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err(&urb->dev->dev, + dev_err(&port->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } @@ -808,7 +797,7 @@ static void pl2303_process_read_urb(struct urb *urb) tty_flag = TTY_PARITY; else if (line_status & UART_FRAME_ERROR) tty_flag = TTY_FRAME; - dbg("%s - tty_flag = %d", __func__, tty_flag); + dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag); /* overrun is special, not associated with a char */ if (line_status & UART_OVERRUN_ERROR) -- 2.20.1