From d84d3ea317ce0db89ce0903b4037f800c5d4c477 Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Sat, 12 Dec 2009 17:54:02 -0800 Subject: [PATCH] i2c: omap: Add support for 16-bit registers The current i2c-omap driver is set up for 32-bit registers, which corresponds to most OMAP devices. However, OMAP730/850 based devices use a 16-bit register size. This change modifies the driver to perform a runtime CPU type check to determine the register sizes, and uses a bit shift of either 1 or 2 bits to compute the proper register sizes for all registers. Signed-off-by: Cory Maccarrone Acked-by: Tony Lindgren Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 44 ++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 19 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 0037e31076ba..913abd7c172f 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -49,24 +49,24 @@ #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) #define OMAP_I2C_REV_REG 0x00 -#define OMAP_I2C_IE_REG 0x04 -#define OMAP_I2C_STAT_REG 0x08 -#define OMAP_I2C_IV_REG 0x0c +#define OMAP_I2C_IE_REG 0x01 +#define OMAP_I2C_STAT_REG 0x02 +#define OMAP_I2C_IV_REG 0x03 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */ -#define OMAP_I2C_WE_REG 0x0c -#define OMAP_I2C_SYSS_REG 0x10 -#define OMAP_I2C_BUF_REG 0x14 -#define OMAP_I2C_CNT_REG 0x18 -#define OMAP_I2C_DATA_REG 0x1c -#define OMAP_I2C_SYSC_REG 0x20 -#define OMAP_I2C_CON_REG 0x24 -#define OMAP_I2C_OA_REG 0x28 -#define OMAP_I2C_SA_REG 0x2c -#define OMAP_I2C_PSC_REG 0x30 -#define OMAP_I2C_SCLL_REG 0x34 -#define OMAP_I2C_SCLH_REG 0x38 -#define OMAP_I2C_SYSTEST_REG 0x3c -#define OMAP_I2C_BUFSTAT_REG 0x40 +#define OMAP_I2C_WE_REG 0x03 +#define OMAP_I2C_SYSS_REG 0x04 +#define OMAP_I2C_BUF_REG 0x05 +#define OMAP_I2C_CNT_REG 0x06 +#define OMAP_I2C_DATA_REG 0x07 +#define OMAP_I2C_SYSC_REG 0x08 +#define OMAP_I2C_CON_REG 0x09 +#define OMAP_I2C_OA_REG 0x0a +#define OMAP_I2C_SA_REG 0x0b +#define OMAP_I2C_PSC_REG 0x0c +#define OMAP_I2C_SCLL_REG 0x0d +#define OMAP_I2C_SCLH_REG 0x0e +#define OMAP_I2C_SYSTEST_REG 0x0f +#define OMAP_I2C_BUFSTAT_REG 0x10 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */ #define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */ @@ -161,6 +161,7 @@ struct omap_i2c_dev { struct device *dev; void __iomem *base; /* virtual */ int irq; + int reg_shift; /* bit shift for I2C register addresses */ struct clk *iclk; /* Interface clock */ struct clk *fclk; /* Functional clock */ struct completion cmd_complete; @@ -189,12 +190,12 @@ struct omap_i2c_dev { static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev, int reg, u16 val) { - __raw_writew(val, i2c_dev->base + reg); + __raw_writew(val, i2c_dev->base + (reg << i2c_dev->reg_shift)); } static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) { - return __raw_readw(i2c_dev->base + reg); + return __raw_readw(i2c_dev->base + (reg << i2c_dev->reg_shift)); } static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) @@ -924,6 +925,11 @@ omap_i2c_probe(struct platform_device *pdev) dev->b_hw = 1; /* Enable hardware fixes */ } + if (cpu_is_omap7xx()) + dev->reg_shift = 1; + else + dev->reg_shift = 2; + /* reset ASAP, clearing any IRQs */ omap_i2c_init(dev); -- 2.20.1