From d819ce965d451aac08e46c9f8e2119fe3a845786 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 27 Nov 2014 13:02:00 -0200 Subject: [PATCH] ASoC: sgtl5000: Remove MCLK restriction According to the sgtl5000 datasheet the MCLK frequency range restriction of 8 to 27 MHz only applies when the PLL is used - synchronous SYS_MCLK input mode. When running the codec as slave, the master should generate MCLK in the range of 256*fs, 384*fs or 512*fs, which is called asynchronous SYS_MCLK input mode. In asynchronous SYS_MCLK we cannot have the 8 to 27 MHz check because if we want to play a 8KHz sample rate track, with a MCLK of 8k * 512 = 4.096MHz the current check would return -EINVAL, which is not correct. Remove the 8 to 27MHz frequency check, since this only applies to the synchronous SYS_MCLK input case. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/codecs/sgtl5000.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 490404c6b4d8..473579106539 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1435,7 +1435,6 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, { struct sgtl5000_priv *sgtl5000; int ret, reg, rev; - unsigned int mclk; struct device_node *np = client->dev.of_node; u32 value; @@ -1460,14 +1459,6 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, return ret; } - /* SGTL5000 SYS_MCLK should be between 8 and 27 MHz */ - mclk = clk_get_rate(sgtl5000->mclk); - if (mclk < 8000000 || mclk > 27000000) { - dev_err(&client->dev, "Invalid SYS_CLK frequency: %u.%03uMHz\n", - mclk / 1000000, mclk / 1000 % 1000); - return -EINVAL; - } - ret = clk_prepare_enable(sgtl5000->mclk); if (ret) return ret; -- 2.20.1