From d7dc100374df0c21afd8a198336ecd7999697159 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 23 Jul 2008 13:17:35 +0200 Subject: [PATCH] Ath5k: unify resets There were 3 code copy and pastes of reset. Unify the resets and place in separate function. Signed-off-by: Jiri Slaby Cc: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 124 ++++++++++-------------------- 1 file changed, 42 insertions(+), 82 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 8bc9b92ad6aa..e8564095b2f8 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -162,7 +162,8 @@ static struct pci_driver ath5k_pci_driver = { * Prototypes - MAC 802.11 stack related functions */ static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -static int ath5k_reset(struct ieee80211_hw *hw); +static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel); +static int ath5k_reset_wake(struct ath5k_softc *sc); static int ath5k_start(struct ieee80211_hw *hw); static void ath5k_stop(struct ieee80211_hw *hw); static int ath5k_add_interface(struct ieee80211_hw *hw, @@ -977,9 +978,6 @@ ath5k_getchannels(struct ieee80211_hw *hw) static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) { - struct ath5k_hw *ah = sc->ah; - int ret; - ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "(%u MHz) -> (%u MHz)\n", sc->curchan->center_freq, chan->center_freq); @@ -995,41 +993,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ - ath5k_hw_set_intr(ah, 0); /* disable interrupts */ - ath5k_txq_cleanup(sc); /* clear pending tx frames */ - ath5k_rx_stop(sc); /* turn off frame recv */ - ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); - if (ret) { - ATH5K_ERR(sc, "%s: unable to reset channel " - "(%u Mhz)\n", __func__, chan->center_freq); - return ret; - } - - ath5k_hw_set_txpower_limit(sc->ah, 0); - - /* - * Re-enable rx framework. - */ - ret = ath5k_rx_start(sc); - if (ret) { - ATH5K_ERR(sc, "%s: unable to restart recv logic\n", - __func__); - return ret; - } - - /* - * Change channels and update the h/w rate map - * if we're switching; e.g. 11a to 11b/g. - * - * XXX needed? - */ -/* ath5k_chan_change(sc, chan); */ - - ath5k_beacon_config(sc); - /* - * Re-enable interrupts. - */ - ath5k_hw_set_intr(ah, sc->imask); + return ath5k_reset(sc, true, true); } return 0; @@ -2217,36 +2181,13 @@ ath5k_init(struct ath5k_softc *sc) */ sc->curchan = sc->hw->conf.channel; sc->curband = &sc->sbands[sc->curchan->band]; - ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false); - if (ret) { - ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret); - goto done; - } - /* - * This is needed only to setup initial state - * but it's best done after a reset. - */ - ath5k_hw_set_txpower_limit(sc->ah, 0); - - /* - * Setup the hardware after reset: the key cache - * is filled as needed and the receive engine is - * set going. Frame transmit is handled entirely - * in the frame output path; there's nothing to do - * here except setup the interrupt mask. - */ - ret = ath5k_rx_start(sc); - if (ret) - goto done; - - /* - * Enable interrupts. - */ sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; + ret = ath5k_reset(sc, false, false); + if (ret) + goto done; - ath5k_hw_set_intr(sc->ah, sc->imask); /* Set ack to be sent at low bit-rates */ ath5k_hw_set_ack_bitrate_high(sc->ah, false); @@ -2446,7 +2387,7 @@ ath5k_tasklet_reset(unsigned long data) { struct ath5k_softc *sc = (void *)data; - ath5k_reset(sc->hw); + ath5k_reset_wake(sc); } /* @@ -2469,7 +2410,7 @@ ath5k_calibrate(unsigned long data) * to load new gain values. */ ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n"); - ath5k_reset(sc->hw); + ath5k_reset_wake(sc); } if (ath5k_hw_phy_calibrate(ah, sc->curchan)) ATH5K_ERR(sc, "calibration of channel %u failed\n", @@ -2670,48 +2611,67 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) } static int -ath5k_reset(struct ieee80211_hw *hw) +ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) { - struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); - ath5k_hw_set_intr(ah, 0); - ath5k_txq_cleanup(sc); - ath5k_rx_stop(sc); - + if (stop) { + ath5k_hw_set_intr(ah, 0); + ath5k_txq_cleanup(sc); + ath5k_rx_stop(sc); + } ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); - if (unlikely(ret)) { + if (ret) { ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret); goto err; } + + /* + * This is needed only to setup initial state + * but it's best done after a reset. + */ ath5k_hw_set_txpower_limit(sc->ah, 0); ret = ath5k_rx_start(sc); - if (unlikely(ret)) { + if (ret) { ATH5K_ERR(sc, "can't start recv logic\n"); goto err; } + /* - * We may be doing a reset in response to an ioctl - * that changes the channel so update any state that - * might change as a result. + * Change channels and update the h/w rate map if we're switching; + * e.g. 11a to 11b/g. + * + * We may be doing a reset in response to an ioctl that changes the + * channel so update any state that might change as a result. * * XXX needed? */ /* ath5k_chan_change(sc, c); */ - ath5k_beacon_config(sc); - /* intrs are started by ath5k_beacon_config */ - ieee80211_wake_queues(hw); + ath5k_beacon_config(sc); + /* intrs are enabled by ath5k_beacon_config */ return 0; err: return ret; } +static int +ath5k_reset_wake(struct ath5k_softc *sc) +{ + int ret; + + ret = ath5k_reset(sc, true, true); + if (!ret) + ieee80211_wake_queues(sc->hw); + + return ret; +} + static int ath5k_start(struct ieee80211_hw *hw) { return ath5k_init(hw->priv); @@ -2820,7 +2780,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, mutex_unlock(&sc->lock); - return ath5k_reset(hw); + return ath5k_reset_wake(sc); unlock: mutex_unlock(&sc->lock); return ret; -- 2.20.1