From d78ad8cbfe73ad568de38814a75e9c92ad0a907c Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Thu, 2 Apr 2009 01:06:01 -0700 Subject: [PATCH] r8169: reset IntrStatus after chip reset Original comment (Karsten): On a MSI MS-6702E mainboard, when in rtl8169_init_one() for the first time after BIOS has run, IntrStatus reads 5 after chip has been reset. IntrStatus should equal 0 there, so patch changes IntrStatus reset to happen after chip reset instead of before. Remark (Francois): Assuming that the loglevel of the driver is increased above NETIF_MSG_INTR, the bug reveals itself with a typical "interrupt 0025 in poll" message at startup. In retrospect, the message should had been read as an hint of an unexpected hardware state several months ago :o( Fixes (at least part of) https://bugzilla.redhat.com/show_bug.cgi?id=460747 Signed-off-by: Karsten Wiese Signed-off-by: Francois Romieu Tested-by: Josep Signed-off-by: David S. Miller --- drivers/net/r8169.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 06c535222666..e1a638a05f86 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2075,8 +2075,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!tp->pcie_cap && netif_msg_probe(tp)) dev_info(&pdev->dev, "no PCI Express capability\n"); - /* Unneeded ? Don't mess with Mrs. Murphy. */ - rtl8169_irq_mask_and_ack(ioaddr); + RTL_W16(IntrMask, 0x0000); /* Soft reset the chip. */ RTL_W8(ChipCmd, CmdReset); @@ -2088,6 +2087,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) msleep_interruptible(1); } + RTL_W16(IntrStatus, 0xffff); + /* Identify chip attached to board */ rtl8169_get_mac_version(tp, ioaddr); -- 2.20.1